隔震换能结构体系的能量分析

将换能器安装在隔震结构的隔震层处,由结构和换能装置构成隔震换能结构体系,它既可以将地震输入给结构的部分能量转换成液压能,实现地震能量的转换,又能减小隔震层的水平位移,降低对隔震层的技术要求,降低造价。本文详细研究地震输给隔震换能结构体系的能量在体系各部分的分配,并与普通隔震结构对比,从能量的角度揭示隔震换能体系的换能控制原理。     

延性需求谱在基于性能的抗震设计中的应用

基于性能的抗震设计理论涉及如何简便而合理地确定结构在指定强度地震下的弹塑性位移需求。本文给出了利用延性需求谱求解结构位移需求的一般步骤:借助模态Pushover分析将多自由度体系分解为几个非线性单自由度体系,以考虑各阶振型的影响;利用延性需求谱计算对应模态的等效单自由度体系的延性及位移需求,并以一定方式组合转化为多自由度体系位移需求。最后,通过算例分析表明:利用延性需求谱求解结构位移需求是一种具有一定精度可为工程接受的简便方法,在基于性能的抗震设计中具有较好的应用前景。     

浅层地震探测的可控震源信号设计

在工程与环境物探中,浅层地震探测是一种常用的高分辨率物探方法,但是这种方法使用的炸药震源和枪击震源破坏力大,对人和建筑物都有危害,因而被禁止在人口稠密的地区使用．因此,无公害的电磁驱动可控震源技术得到了发展和应用．利用扫描信号压缩技术,小能量弹性波Chirp信号可持续向地下发送,不损害地面和建筑物,对人群也没有影响,是一种较理想的城市浅层地震震源．本文介绍了电磁驱动可控震源的信号设计方法,并简要介绍了具有波束定向能力的相控震源的设计思想．     

Comparison of seismic actions and structural design requirements in Chinese code GB 50011 and international standard ISO 3010

This paper presents a comparison between the Chinese Code GB50011-2001 and the International Standard ISO3010: 2001(E), emphasizing the similarities and differences related to design requirements, seismic actions and analytical approaches. Similarities include: earthquake return period, conceptual design, site classification, structural strength and ductility requirements, deformation limits, response spectra, seismic analysis procedures, isolation and energy dissipation, and nonstructural elements. Differences exist in the following areas: seismic levels, earthquake loading, mode damping factors and structural control.     

A simplified methd of evaluating the seismic performance of buildings

This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames,while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design.     

新疆西部苏盖特构造带构造特征及勘探前景

苏盖特构造带位于新疆昆仑山弧形推覆体前缘.本文通过研究苏盖特构造带的构造特征,确定了地震反射层的地质属性,认为苏盖特构造带由表层推覆体及下部下第三系-二叠系之间的地层经过3次重复形成的叠瓦状推覆体构成.苏盖特构造带活动始于上新世阿图什组沉积期,定型于更新世.通过研究西昆仑逆冲推覆体及已钻探井的地表油源、储层特征及储盖组合,认为苏盖特构造带具有两套好的油源即石炭-二叠系及侏罗系油源,两套好的储集层即白垩系和下第三系储层,相应地,发育两套储盖组合,具有良好的圈闭及运聚条件,是有利的勘探目标区.     

坛紫菜(Porphyra haitanensis)化学成分的研究

利用硅胶色谱、Sephadex LH-20凝胶色谱、HPLC等技术,从坛紫菜(Porphyra haitanensis)乙醇提取物首次分离纯化得到了7个化合物,通过质谱(MS)及核磁共振波谱(1H NMR、13C NMR)等现代波谱技术鉴定为：1,8-二羟基-9,10-蒽醌(1)、邻苯二甲酸二正丁酯(2)、邻苯二甲酸二异丁酯(3)、β-谷甾醇(4)、鲨肝醇(5)、(E)-N-2(1,3-二羟基-4-十八烯基)-十六酰胺(6)、胆甾醇(7)。其中,化合物1对金黄色葡萄球菌(Staphyloccocus aureus)的最低抑菌浓度(MIC)为80μg/mL。     

Reliability analysis of soil nail internal limit states using default FHWA load and resistance models

Abstract

Reliability analyses of nail pullout, nail-in-tension, and system reliability of internal limit states are presented for both permanent and temporary soil nails that are designed using default Federal Highway Administration nail load and resistance models within traditional deterministic allowable stress design (ASD) framework. The model uncertainty, correlations between soil strength parameters, between model factor, and nominal load term, and between the two internal limit states, and influence of model factor fittings are all addressed in the analyses. This study provides a general idea of the reliability that is implicitly embedded in current ASD-based soil nail internal limit state designs.     

The Concept and Development of Smart Structures Technologies for Long-span Cable-supported Bridges

This article presents an overview of smart structures technologies in connection with long-span cable-supported bridges. Considering the broad scope of the smart structures technologies, two subareas, namely, structural health monitoring and structural control technologies, and their applications in long-span cable supported bridges, are identified as the focus of this review. It is believed that by, adopting the smart structures technologies, reliable operation and hazard management of long-span bridges can be achieved much more efficiently and can be made economically feasible, especially for bridges located at sites with high risks of severe natural hazardous events, such as those facing the bridges of the Taiwan Strait Crossing project. The feasibility of and practical issues in implementing the smart structures technologies in the design and construction of long-span cable-supported bridges are also discussed here. Considering the time span of the construction of the Taiwan Strait Crossing, some of the innovative technologies with a high potential for future long-span bridge applications, while still at the stage of exploratory research at the time of writing, are also examined as it is believed these technologies might have become prevalent by the completion time of the Taiwan Strait Crossing project.     

表面粗糙对渤海海冰热红外辐射方向特征的影响研究

热红外遥感技术使大范围、快速地监测渤海海冰表面温度成为可能。然而,目前绝大多数遥感器都是小视场角的,只对海冰在某个方向上的辐射能量进行了测量。由于自然界的海冰大多数都是高低起伏的、不平坦的,如果近似地认为遥感像元尺度内各部分温度是相同的,有时会带来较大误差。在盛冰期的渤海辽东湾东岸固定冰区,分别用3D激光扫描仪、热红外成像仪和自计温度计测量了渤海海冰的表面形状、辐射亮温和真实温度。结果表明,由于海冰表面粗糙,会形成三维非同温像元。同时,也会导致传感器在粗糙海冰的各个部分的局部观测天顶角与整体观测天顶角有所不同,造成粗糙海冰与平整海冰的方向辐射特征有较大差异,平整海冰更接近理想平面,粗糙海冰更接近朗伯面。