扎赉诺尔煤田水文地球化学特征及成因分析

扎赉诺尔煤田地处山前,有利的地理环境条件形成了独特的水文地质特征—地下水的垂直分带和地下水顺层径流。其特有的水文地球化学环境导致了地下水成分的差异性。本文从水文地球化学的角度,对煤田地下水的水文地球化学特征及成因进行了论述分析。     

Principal axes of m-DOF structures PartⅠ:Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems,and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading.This first paper deals with quantitative definitions of principal axes and "cross effects" of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part Ⅱ of this series.     

Study on dynamics of tectonic evolution in the Fushun Basin, Northeast China

The updated study shows that the taphrogenesis of basement of the Fushun Basin is not a kind of instantaneous process. It intensified gradually and went to extreme in the sedimentary stage of the Guchengzi formation, and then, it weakened rapidly and stopped soon afterwards; the depression did not take place after the taphrogenesis. On the contrary, it almost happened simultaneously with the taphrogenesis. The depression went at a high speed from the beginning of the sedimentary period of the Xilutian formation, and then weakened gradually in the sedimentary period of the Gengjiajie formation. The evolution course of the synsedimentary structure of the Fushun Basin can be summarized as the following six stages: slow taphrogenesis and high speed depression to accelerated taphrogenesis and high speed depression to high speed taphrogenesis and high speed depression to retarded taphrogenesis and high speed depression to gradual halt of taphrogenesis and reduced depression to slow depression and gradual halt of depression. The tectonic evolution resulted in the formation of the "lower taphrogenesis and upper depression" structure. The formation of the binary structure might be due to the suspension of taphrogenesis and the change of the regional structure stress field, but the depression kept going. The result of calculation combining the analysis of the synsedimentary structural frame, the back-stripping method of the subsidence history of the basin basement and the simulation of thermo-settlement history indicates that the great sedimentary space required by the "upper depression part" consists of two parts, namely, 40% from compaction of sediments and 60% from slow depression of the basin basement during a long period of time. Gradual halt of the depression in the Fushun Basin may be attributed to the reversal of the lithosphere hot-recession and gravity isostasy adjustment which may be the result of new hot-events in the depths and accompanied invasion of extremely thick diabase sill, thus revealing a new forming mechanism of "fault subsidence at the base and depression on the top" structure.     

桥梁隔震体系振动台试验研究(IV)——隔震桥梁的设计方法探讨

在前文模型试验的基础上 ,本文总结归纳了隔震桥梁的设计方法与设计流程 ,着重论述探讨了隔震桥梁的概念设计与细部构造设计应注意的问题     

地震静校正全局最优化问题的求解

针对地震静校正存在的非线性和多参数性等问题，本文提出了一种全局优化的剩余静校正方法.在模型更新规则上，把模拟退火方法和均匀优化设计方法结合在一起，使模型的更新更为合理，从而加快了搜寻全局最优解的速度.同时提出了模型的不同分量的温度参数和退火过程的选取方式，把温度参数的选取与地震剖面的能量联系起来，使温度参数的选取具有自适应的特点.该方法克服了常规模拟退火方法所具有的寻优空间不均匀以及退火参数需通过多次试验选取的缺陷.通过实际地震资料的计算证明，本文提出的方法对地震静校正问题合理而有效.     

桥梁限位器抗震设计方法研究

本文建立了两跨简支梁桥和五跨多跨刚架桥两结构模型，针对限位器的种类、刚度、强度、安装位置，输入地震动等进行了大量工况下的数值模拟研究。研究表明限位器与柱（框架）的刚度比在0.5-2之间较优。将现有的限位器设计方法应用于两算例结构，对现有限位器设计方法进行了比较研究。     

地震预报思路的再讨论

文中回顾了1974年提出的“块、带、源、兆、触、报”六字预报思路，并基于近20年来的研究对此进行了补充和深化。     

The Advances and Prospects of Research on Earthquake Engineering at IEM

This paper describes briefly the recent advances and acievements of the research projects conducted by the Institute of Engineering Mechanics(IEM) in the period of the Ninth Five-Year Plan(1995-2000) with the support of the China Seismological Bureau(CSB),These projects are related with key problems in the field of earthquake engineering.They are:development of the methods for determining earthquake resistant design load level,study on mechanisms of earthquake damage to buildings.development of new technology of base isolation,and study on earthquake damage prediction and seismic losss assessment methods.Through these studies,quite a number of problems have een solved and some of them have een applied in earthquake engineering design and practice.     

Recent developments in seismically isolated buildings in Japan

The Building Standard Law of Japan and related Enforcement Order and Notifications have been substantially revised since the year 2000 to introduce a performance-based regulatory and deregulation system for building control systems. Up to then, time-history analyses were mandatory for isolated buildings and had to be specially approved by the Minster of the Ministry of Construction (MOC). Simplified design procedures based on the equivalent linear method for seismically isolated buildings have been issued as “Notification 2009 — Structural calculation procedure for buildings with seismic isolation” from MOC, and are now integrated into the Ministry of Land, Infrastructure, and Transportation (MLIT). Along with Notification 2009, “Notification 1446 of year 2000 — Standard for specifications and test methods for seismic isolation devices” was also issued. Buildings with heights equal to or less than 60m and that are designed according to these Notifications, including base isolated buildings, only need approval from local building officials, and no longer require the special approval of the Minister of MLIT. This paper summarizes: 1) some statistics related to buildings with seismic isolation completed up to the end of 2001; 2) simplified design procedures required by Notification 2009 of year 2000; and 3) performance of seismic isolation devices required by Notification 1446 of year 2000.     

Seismic structural control using semi-active tuned mass dampers

This paper focuses on how to determine the instantaneous damping of the semi-active tuned mass damper (SATMD) with continuously variable damping. An off-and-towards-equilibrium (OTE) algorithm is employed to examine the control performance of the structure/SATMD system by considering the damping as an assumptive control action. The damping modification of the SATMD is carried out according to the proposed OTE algorithm, which is formulated based on analysis of the structural movement under external excitations, and the measured responses of the structure at every time instant. As examples two numerical simulations of a five-storey and a ten-storey shear structures with a SATMD on the roof are conducted. The effectiveness on vibration reduction of MDOF systems subjected to seismic excitations is discussed. Analysis results show that the behavior of the structure with a SATMD is significantly improved and the feasibility of applying the OTE algorithm to the structural control design of SATMD is also verified.