确定连续系统参数的时域方法

提出一种确定连续系统参数的时域方法。该方法利用方波输入和系统稳定性，离析出输出采样信号与结构参数的内在联系，推导出确定连续系统结构参数的算法．指出该算法与辨识方法相结合，可实现对含随机干扰的连续系统结构参数的估计．     

印度洋东部金枪鱼延绳钓渔业研究--大眼金枪鱼(Thunnus obesus)的生物学特征

根据作者在印度洋东部海域的延绳钓生产实践,对渔获的大眼金枪鱼群体的群体构成、摄食、繁殖等基本生物学特征进行了初步探讨.结果表明,渔获群体由纯重10～115kg、叉长80～195cm个体组成,纯重与叉长关系式w=2.000×10-5×L2.969;渔获物以3～5龄个体为主,雄性个体所占比例明显高于雌性个体,且随年龄增长雄性个体所占比例逐步提高.鱼群在该海域产卵期较长,不同年龄组性腺发育节律有明显差异.     

Nonlinear coupled dynamic response of offshore Spar platforms under regular sea waves

Many innovative floating offshore structures have been proposed for cost effectiveness of oil and gas exploration and production in water depths exceeding one thousand meters in recent years. One such type of platform is the offshore floating Spar platform. The Spar platform is modelled as a rigid body with six degrees-of-freedom, connected to the sea floor by multi-component catenary mooring lines, which are attached to the Spar platform at the fairleads. The response dependent stiffness matrix consists of two parts (a) the hydrostatics provide restoring force in heave, roll and pitch, (b) the mooring lines provide the restoring force which are represented here by nonlinear horizontal springs. A unidirectional regular wave model is used for computing the incident wave kinematics by Airy’s wave theory and force by Morison’s equation. The response analysis is performed in time domain to solve the dynamic behavior of the moored Spar platform as an integrated system using the iterative incremental Newmark’s Beta approach. Numerical studies are conducted for sea state conditions with and without coupling of degrees-of-freedom.     

Behavior of Pile Groups under Lateral Load

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.     

闽南近海尖头斜齿鲨的生殖生物学研究

尖头斜齿鲨(Scoliodon laticaudus)是暖水性小型鲨鱼,为有胎盘胎生种类.在闽南近海,其雄鱼的性成熟长度为382～448mm,雌鱼的性成熟长度为405～467mm,1994年5月至1995年4月的周年随机采样中,雌鱼在群体中所占比例为53.0%.雌鱼的妊娠开始于1～4月,同年的6～8月分娩,妊娠期为5～6个月.尖头斜齿鲨雌鱼每个子宫一次妊娠怀胚胎1～12尾,其中3～6尾者占67.8%.雌鱼一次妊娠产仔鱼2～24尾,平均9.1尾,其中6～13尾占70%;57%的母体左右子宫内胚胎数相同.胚胎数量随母体全长的增大而呈线性增加.雌性尖头斜齿鲨生殖周期约为2年,一生生殖2～3次,生殖能力较低.尖头斜齿鲨胚胎在分娩时全长138～142mm,与雌鱼性成熟长度的比为0.30～0.35,胚胎的雌雄比为1.17:1.同一子宫内及左右两子宫中的胚胎发育情况均基本相同.另外还讨论了鲨鱼资源的保护和管理问题.     

基于塑性极限分析理论和神经网络响应面的结构系统可靠性分析

根据多层神经网络映射存在定理，提出了基于神经网络响应面和塑性极限分析理论的结构系统可靠性分析的新方法。数值试验表明，该方法可以快速、高质量地求出结构系统可靠性指标，是一个具有发展前景的新方法。     

Hydrothermal Vent Geology and Biology at Earth’s Fastest Spreading Rates

Earth’s fastest present seafloor spreading occurs along the East Pacific Rise near 31°–32° S. Two of the major hydrothermal plume areas discovered during a 1998 multidisciplinary geophysical/hydrothermal investigation of these mid-ocean ridge axes were explored during a 1999 Alvin expedition. Both occur in recently eruptive areas where shallow collapse structures mark the neovolcanic axis. The 31° S vent area occurs in a broad linear zone of collapses and fractures coalescing into an axial summit trough. The 32° S vent area has been volcanically repaved by a more recent eruption, with non-linear collapses that have not yet coalesced. Both sites occur in highly inflated areas, near local inflation peaks, which is the best segment-scale predictor of hydrothermal activity at these superfast spreading rates (150 mm/yr).     

Comparison of the biology, dynamics, and secondary production of Talorchestia brito (Amphipoda, Talitridae) in Atlantic (Portugal) and Mediterranean (Tunisia) populations

The biology, population dynamics, and production of Talorchestia brito were studied at two sandy beaches located on the Atlantic (Portugal) and on the Mediterranean (Tunisia) coasts, respectively. The seasonal variation in abundance and the overall densities were similar in both populations. Reproduction occurred from February to September in the Atlantic, and from March to early November in the Mediterranean. The sex ratio was male biased in the Atlantic, and female biased in the Mediterranean. Based on data from the Atlantic population, both abundance and the proportion of reproductive females were positively correlated with temperature, while the proportion of juveniles in the population was positively correlated with temperature and sediment moisture. On average, individuals from the Atlantic were larger than the ones from the Mediterranean. Life span was estimated at six to nine months in the Atlantic, and five to eight months in the Mediterranean. Talorchestia brito was shown to be a semiannual species, with iteroparous females producing two broods per year, and exhibited a bivoltine life cycle. The minimum age required for males' and females' sexual differentiation and for female sexual maturation was shorter in the Mediterranean. Growth production (P) was estimated at 0.19 g m⁻² y⁻¹ ash free dry weight (AFDW; 4.3 kJ m⁻² y⁻¹) in the Atlantic population, and 0.217 g m⁻² y⁻¹ AFDW (4.9 kJ m⁻² y⁻¹) in the Mediterranean one. Elimination production (E) was estimated at 0.35 g m⁻² y⁻¹ AFDW (7.9 kJ m⁻² y⁻¹) in the Atlantic, and 0.28 g m⁻² y⁻¹ AFDW (6.3 kJ m⁻² y⁻¹) in the Mediterranean. The average annual biomass ( ) (standing stock) was estimated at 0.032 g m⁻² in the Atlantic beach, and 0.029 g m⁻² in the Mediterranean one, resulting, respectively, in ratios of 5.9 and 7.5 and ratios of 10.8 and 9.6. Like other talitrids, T. brito exhibited geographic variation in morphometrical characteristics, sex ratio, growth rates, life span, and reproduction period, with the Atlantic population presenting a slower life history.     

Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.     

6-磷酸山梨醇脱氢酶(gutD)基因克隆、测序和表达

本研究根据6-磷酸山梨醇脱氢酶基因(gutD)两端序列设计引物，以假单胞杆菌(Pseudonmonas XM)的总DNA为模板通过PCR的方法克隆gutD基因并进行序列分析，将克隆得到的gutD基因与原核表达载体pBV220连接并转化大肠杆菌(Escherichia coli)JM101后检测其蛋白表达及菌株生长耐盐性。