Laboratory modelling of shear behaviour of soft joints under constant normal stiffness conditions

Shear behaviour of regular sawtooth rock joints produced from casting plaster are investigated under constant normal stiffness (CNS) conditions. Test results obtained in this investigation are also compared with the constant normal load (CNL) tests. It is observed that the peak shear stress obtained under CNL conditions always underestimates the peak shear stress corresponding to the CNS condition. Plots of shear stress against normal stress show that a nonlinear (curved) strength envelope is acceptable for soft rock joints subjected to a CNS condition, in comparison with the linear or bilinear envelopes often proposed for a CNL condition. Models proposed by Patton (1966) and Barton (1973) have also been considered for the predictions of peak shear stress of soft joints under CNS conditions. Although Patton's model is appropriate for low asperity angles, it overestimates the shear strength in the low to medium normal stress range at higher asperity angles. In contrast, while Barton's model is realistic for the CNL condition, it seems to be inappropriate for modelling the shear behaviour of soft joints under CNS conditions. The effect of infill material on the shear behaviour of the model joints is also investigated, and it is found that a small thickness of bentonite infill reduces the peak stress significantly. The peak shear stress almost approached that of the shear strength of infill when the infill thickness to asperity height ratio (t/a) reached 1.40. This paper also introduces an original, empirical shear strength envelope to account for the change in normal stress and surface degradation during CNS shearing. © Rapid Science Ltd. 1998     

Strain fields and mechanical response of a highly to medium fissured bentonite clay

This article presents the developments of an ongoing research aimed at modelling the influence of fissuring on the behaviour of clays. In particular, it recalls the main results of an extensive laboratory investigation on a fissured bentonite clay from the south of Italy and presents the data of a new investigation on the evolution with shearing of the strain fields developing within the clay, resulting from Digital Image Correlation (DIC). Element test results are analysed in the framework of continuum mechanics and linked to the clay fissuring features, once characterised using the Fissuring IDentity (F‐ID) chart. This article compares the bentonite behaviour with that of other fissured clays of different F‐IDs, highlighting the common behavioural features. Thereafter, the soil response at the macro level is related to the DIC‐derived strain fields evolving within the clay with loading. For this purpose, DIC was successfully used to investigate the deformation processes active in the fissured clay and the sources of the localisation phenomena. DIC is shown to provide indications of the extent to which highly to medium fissured clays element test results can be of use to model the clay behaviour according to continuum mechanics. Copyright © 2012 John Wiley & Sons, Ltd.     

Internal testing of a numerical model of hillslope–channel coupling using laboratory flume experiments

The numerical model COUP 2D simulates the hydrological coupling between hillslopes and the river channel during a rainfall event. In order to test the numerical model, a 1:100 scaled laboratory flume which was modified to incorporate lateral hillslope elements, was used to run a series of experiments in which hillslope angle, channel angle, hillslope discharge and channel discharge were the varying parameters. Overall, there were 18 different experimental configurations with three replicates carried out for each condition, leading to a total of 54 experiments. These conditions were then used to parameterize and run COUP 2D. Internal model outputs of flow depth and flow velocity at four cross‐sections in the channel were compared to the measurements made in the physical model for the same parameter conditions. Statistical comparisons of the measured and modelled data were carried out for each experiment and across all experiments, using two goodness‐of‐fit measures—root mean square error and Nash–Sutcliffe coefficient of efficiency—in order to assess the performance of the model over an entire simulation as well as over all the simulations. The main effects on the goodness‐of‐fit measures for flow depth of each experimental variable, as well as the interactions between variables, were evaluated using statistical modelling. The results show that the model captures flow‐depth variations in response to changing channel and hillslope parameters. Statistical modelling suggests that the main effects on model error are cross‐section position, channel angle and channel discharge. Significant interactions also occur between all the channel variables and between the channel variables and hillslope discharge. The results of the testing procedure have significant implications for the consideration of different model components and for the interaction between data‐ and model evaluation. Copyright © 2007 John Wiley & Sons, Ltd.     

同幅双速跟踪成像CCD相机模拟电路系统设计

讨论了同幅双速跟踪成像技术对CCD相机系统的特殊要求,详细地介绍了该相机前端模拟系统的设计思想、系统结构和主要的电路模块。对系统中一些关键电路模块进行了仿真和测试,并对仿真和测试结果进行比较分析,以检验电路系统设计的合理性。     

Ӧ�ǵش�̨��Ź۲⻷������

??????????????????????????????????????????????????????в?????????????????????????????????????????????≤1 nT/m????????????≤0.1 nT?????????????????????????????????????????????????????в???????????????????????????????????     

大唐国际东营一期49.5 MW风电场工程桩基施工及其原体试验

大唐国际东营风电一期工程拟建风电场场区位于东营市东部沿海区域,拟建场地上覆第四系地层,结构松散,厚度较大,工程性质较差,地基强度较低,不能满足重要建（构）筑物对其强度及变形的要求,且场地内的饱和粉土及砂土在地震影响烈度达Ⅶ度时将可能产生液化现象,因此需进行地基处理。根据现场岩土条件,拟采用预应力高强混凝土管桩（PHC）,需进行桩基原体试验。主要介绍了桩基原体试验施工过程、检测方法及试验成果等。     

内蒙古金厂沟梁金矿床成矿流体特征及稳定同位素研究

对金厂沟梁金矿床含金石英脉中流体包裹体进行了岩相学、显微测温、单个包裹体的激光拉曼测试以及O和S同位素组成等方面研究。结果表明,成矿流体气相成分主要为H2 O,属H2 O-NaCl体系,包裹体均一温度为148.7℃～352℃,盐度[ w （ NaCl ）/％]为1.05％～5.99％。δ18 O值为-1.1‰～3.0‰,说明成矿流体继承了变质流体的特征,仍以岩浆水和后期大气降水为主;δ34 SV-CDT组成为0.6‰～4.3‰,平均值0.817‰,极差为3.1‰,表明成矿流体中的硫主要来自于幔源,其次为围岩。综合分析认为,金厂沟梁金矿床是在燕山晚期太平洋板块俯冲导致岩石圈的快速减薄、拆沉的拉张环境下形成的浅成造山型金矿。     

一种程控宽频带多波形信号发生器的研制

针对目前专门的函数信号发生器IC功能简单、精度不高、调节方式不灵活等缺点和DDS芯片外围电路设计复杂、成本较高等问题,设计研制了一种程控宽频带多波形信号发生器。该信号发生器采用单片机STC89C52控制专用函数发生器MAX038实现,通过键盘设置输出波形类型、频率、占空比和幅度等各种参数,采用闭环控制方法对输出频率自动反馈控制以提高频率精度,并由八位LED显示器实时显示状态信息。实际运行结果表明:该系统可以产生频率范围在1Hz~20MHz、幅度在2~10V(VPP)连续可调、占空比在10%~90%变化的三角波、锯齿波、方波、正弦波和PWM波,输出频率精度小于0.01%。该仪器具有电路结构简单、性能优良、成本低廉、功能多样、使用方便等优点,在生产实践和科技研究领域中具有广泛的应用前景。     

分段多项式拟合在动三轴试验数据处理中的应用

动三轴采集的试验数据点(剪应变与动剪模量和阻尼比之间)具有离散性和有限性,为方便应用需要对数据点进行拟合,但现有经验公式不一定很好吻合试验数据。为得到不同剪应变与对应的动剪模量和阻尼比之间的关系,本文利用最小二乘原理,对渤海某海洋平台地基土进行动三轴试验获得的动剪模量、阻尼比与剪切应变的数据进行了分段多项式的拟合。数据处理过程是先对剪应变值进行了压缩处理,然后再分段低次多项式拟合,得到多项式拟合参数。通过此项改进解决了正规方程解中的病态问题,且拟合效果良好。