地下管线普查产品的检验

随着城市地下管线在城市管理、规划及建设发展过程中重要性的逐渐体现,越来越多的城市开展了地下管线普查,但其质量检验与质量评定方法却相对滞后,本文结合实例阐述了地下管线普查产品的检验及质量评定方法,供大家参考。     

Parametric study for underwater blast-induced pipeline response embedded in marine sediments

Abstract

Blast response of submerged pipelines has been a research focus in recent years. In this article, a three-dimensional numerical model is established to investigate dynamic response of pipelines due to underwater explosion. The u–p approximation is integrated into finite element method (FEM) to simulate pore water effect in the seabed. Numerical continuity between hydraulic pressure in the flow field and pore pressure in the marine sediment is guaranteed to realize the blast response of submerged pipelines in ocean environment. Both fluid–structure interaction (FSI) and pipeline–seabed interaction (PSI) have been considered in the proposed model simultaneously. A comprehensive parametric study is carried out after validation of the present model with test data from underground explosion and underwater explosion, respectively. The effect of embedment depth, TNT equivalent, stand-off distance, pipeline diameter, and pipeline thickness to blast response of the submerged pipelines is investigated based on numerical results. Variation of deformation patterns and stress distribution of the pipeline with various installation and structure parameters has been illustrated and discussed to facilitate engineering practice.     

利用海量探测数据实现昆明市地下管线三维建模的应用研究

本文讲述以Skyline5.1为三维GIS开发平台,以C#为二次开发语言,结合昆明市地下管网的实地探测数据,快速实现昆明城市地下管线探测数据三维模型的建设。在此过程中解决了大数据量城市地下管线数据直接三维模型构建并正确处理管线数据之间的逻辑关系,减少人工干预工作量;从而实现城市地下管线探测数据快速生成三维图形并提交使用。     

Prediction of hydrodynamic forces on submarine pipelines using an improved Wake II Model

The hydrodynamic force model for prediction of forces on submarine pipelines as described includes flow history effect (wake effects) and time dependence in the force coefficients. The wake velocity correction is derived by using a closed-form solution to the linearized Navier–Stokes equations for oscillatory flow. This is achieved by assuming that the eddy viscosity in the wake is only time dependent and of a harmonic sinusoidal form. The forces predicted by the new Wake (Wake II) Model have been compared to Exxon Production Research Company Wake Model in terms of time histories (force shape) and magnitudes of peak forces. Overall, the model predictions by the Wake II Model are satisfactory and represent a substantial improvement over the predictions of the conventional models. The conventional force models representing adaptations of Morison's equation with ambient velocity and constant coefficients give predictions that are in poor agreement with the measurements especially for the lift force component. The Wake II Force Model can be used for submarine pipeline on-bottom stability design calculations for regular waves with various pipe diameters.     

考虑土体固液二相性质的地下管线地震反应研究

本文将管线周围的土体视为固-液二相介质，采用考虑地震过程中土体内孔隙水压力的增长和消散的有效应力分析方法，并以非线性的土体本构模型模拟土体动力特性的改变以及在孔隙水压作用下的变形，以求接近土体的真实地震反应。研究表明随着土体软化程度的不同，受到土体约束的管线应力亦发生相应变化。文中详细研究了地震动峰值、管线直径、行波波速和入射角度等对管线应力的影响。     

海洋管道S型铺设过程研究

随着海洋科学技术的发展和人类对于海洋油气资源认识的不断增加,海洋油气资源的开发从近海走向远海。作为海洋油气运输主要方式的海洋管道,其铺设问题成为焦点。常见海洋管道工程铺设方法为:拖曳铺设、卷筒铺设、J型铺设、S型铺设。通过引入先进的国际海洋工程软件OrcaFlex并结合国内外关于海洋管道铺设的工程手册及相关规范、标准,如DNV、API、AWS等,实时模拟研究S型海洋管道铺设过程。结合作者工作经历及实际海洋铺管工程背景算例分析,研究铺管上弓段接触点、悬垂段及触底段在铺设过程中的各自静力、动力特性。对海洋管道S型铺设过程中应该注意的一些有关设计、工艺和HSE低成本安全高效铺设等方面提出几点有用的意见。     

智慧城市云平台中地下管线系统模块设计

随着互联网技术支撑的实时以及动态的大数据时代的来临,智慧城市的发展面临新的问题。城市智慧管线系统是智慧城市不可或缺的重要组成部分,其系统在传统平台的网络硬件支撑、数据支撑、服务支撑、应用及用户各个逻辑层面上,必须有新的技术手段应用和对传统技术的升级及替代。     

室内管道系统抗震研究综述

根据最新震害统计资料发现,非结构构件在地震中造成的经济损失远大于结构构件。非结构构件按照地震反应特征可分为位移敏感型构件和加速度敏感型构件。其中,位移敏感型构件的破坏多受层间位移角控制,主要采用拟静力试验进行研究;加速度敏感型构件的破坏多受楼面加速度的控制,主要采用振动台试验进行研究。室内管道系统是非结构构件的重要组成部分,室内管道系统中的立管和水平管分别属于位移敏感型和加速度敏感型构件。本文系统地论述了近年来国内外学者开展的关于室内管道系统的抗震研究工作,并对室内管道系统下一步的研究工作提出了建议。     

Effect of geometric and material discontinuities on the reeling of pipelines

The winding and unwinding of a pipeline onto a large diameter reel as practiced in the reeling installation method, induces bending strains of 1–3% followed by straightening, and reverse bending. The operator must ensure that such plastic deformations are sustained free of local buckling or rupture in the line. Such failures are for example precipitated by pipeline discontinuities in wall thickness and yield stress as they act as stress risers, lead to localized deformations severe enough to result in local buckling. The effect of such discontinuities is studied using a large-scale nonlinear finite element model that simulates the reeling/unreeling of a pipeline. Nonlinear kinematic hardening is used to capture the elasto-plastic behavior of the material imposed by the bending/reverse bending history. Discontinuities in wall thickness and yield stress are shown to result in sharp local changes in curvature that extend over 3–4 pipe diameters accompanied by severe local straining and ovalization. The extent of the disturbance is governed by the bending strain imposed by the ratio of pipe to reel diameter. It can be reduced by an increase in the applied tension but at the expense of additional ovalization of the pipeline. It can also be reduced by increasing the pipe wall thickness but with the consequent increase in costs. A parametric study of the effect of such discontinuities demonstrates that for some combinations of process parameters, the disturbance can lead to local buckling either during winding or unwinding. It is concluded that a modeling framework such as the one presented should be used to generate a design protocol for reel-installed pipelines.