汶川地震断裂带科学钻探一号孔（WFSD-1）断层泥孔段泥浆体系的研究与应用

汶川地震断裂带科学钻探项目一号孔（WFSD-1）钻遇了30多米的断层泥。针对断层泥钻探的主要问题,对断层泥钻探泥浆体系进行了研究与应用,形成了具有高密度、低失水、低渗透、润滑减阻特点的泥浆体系,再加上重泥浆体系对地应力的平衡作用,成功地解决了断层泥的钻进取心问题,为顺利完成钻孔施工任务奠定了坚实的基础。     

浙江八面山萤石矿床流体包裹体地球化学研究

八面山萤石矿床流体包裹体可分为三大类型:Ⅰ气液包裹体,Ⅱ气体包裹体,Ⅲ含子矿物的多相包裹体;矿床成矿温度变化不大,主要集中在120～240°C之间。细粒条带状萤石矿石包裹体温度变化在115～250℃之间;巨晶块状萤石矿石和石英脉型萤石矿石包裹体温度集中在135～170℃之间。萤石矿床流体包裹体以低盐度成矿流体为主。成矿过程中起作用的成矿流体为KCl-H2O体系和CO2-CaF2-H2O体系,成矿溶液的离子类型属K+-Ca2+-HCO--F-型,KCl-H2O体系反映岩浆期后热液作用的结果,而CO2-CaF2-H2O体系可能反映了寒武纪矿源层成矿体系。通过包裹体研究,认为八面山萤石矿床是受地层-岩体-层间断裂共同控制"三位一体"的热液成因矿床。     

西藏尼玛县达查金矿床同位素地球化学研究

西藏达查金矿的成矿物质来源问题一直存在很大的争议。达查金矿床矿物中硫、铅、硅同位素及包裹体水中的氢、氧同位素研究表明 ,矿区内黑色炭质板岩、浸染状黄铁绢英岩化闪长玢岩和石英黄铁矿脉中的δ3 4SCDT值分布范围为 1 1‰～ 1 6‰ ,平均为 1 4‰ ,与陨石硫或深源岩浆硫接近。地层铅、岩浆岩铅和矿石铅在构造模式图上主要落在造山带线附近。石英包裹体的均一温度为 44 0 8～ 5 0 1 8℃ ,δDV -SMOW 值为 - 12 6‰～ - 98‰ ,δOV -SMOW 在 2 0 8‰～ 8 84‰之间 ,为典型的岩浆水 ;矿石中热液石英的硅同位素δ3 0 SiNBS -2 8　　　值的极差主要集中在 - 0 5‰～- 0 6‰之间 ,与成矿密切相关的硅质可能来源于基性或中基性岩浆岩。岩金矿的成矿物质可能有 3个主要的源区 :一是木嘎岗日群第二、三岩组 ,该岩组的海底热水沉积物含有大量的成矿物质 ;二是深部隐伏的原来特提斯海底的基性或中基性岩浆岩 ,它是金与硅的主要供给者 ;三是本区的中酸性岩浆岩 ,它是多种成矿物质最终集中成矿的主要中介。本区的成矿流体主要为受到大气降水或海水强烈改造的岩浆热液     

阿姆河盆地卡洛夫-牛津阶碳酸盐岩储层地球化学特征和成岩流体分析

卡洛夫-牛津阶碳酸盐岩为土库曼斯坦阿姆河盆地主力天然气产层,以储层岩石学分析为基础,结合Fe、Sr、Mn微量元素和C、O、Sr同位素及流体包裹体地球化学特征,分析了储层成因和成岩流体性质,得出以下几点认识:(1)由厚壳蛤壳体测定的87Sr/86Sr比值在全球锶同位素地层曲线上可标定的年龄为157.2Ma,储层发育层位属于卡洛夫-牛津阶;(2)卡洛夫-牛津阶为一持续海侵-海退旋回,持续海侵期是礁、滩相储层形成期,而持续海退期为致密盖层发育期;(3)较高的Fe和Sr及较低的Mn含量,以及伴随成岩强度加大δ13C变化不大而δ18O向负值方向偏移的演化趋势,证明成岩作用发生在缺乏大陆淡水影响和以温度为主控因素的还原性封闭系统中;(4)综合同位素地球化学与流体包裹体和镜质体反射率特征,可确定洛夫-牛津阶碳酸盐岩仍处在中成岩阶段;(5)礁、滩相灰岩的溶蚀、埋藏白云化和充填缝、洞的方解石是不同成岩阶段的水-岩反应产物,成岩流体主要来自于深部富Sr的地层热卤水。     

Fluid Inclusions and Hydrogen,Oxygen, Sulfur Isotopes of Nuri Cu‐W‐Mo Deposit in the Southern Gangdese,Tibet

The Nuri Cu‐W‐Mo deposit is located in the southern subzone of the Cenozoic Gangdese Cu‐Mo metallogenic belt. The intrusive rocks exposed in the Nuri ore district consist of quartz diorite, granodiorite, monzogranite, granite porphyry, quartz diorite porphyrite and granodiorite porphyry, all of which intrude in the Cretaceous strata of the Bima Group. Owing to the intense metasomatism and hydrothermal alteration, carbonate rocks of the Bima Group form stratiform skarn and hornfels. The mineralization at the Nuri deposit is dominated by skarn, quartz vein and porphyry type. Ore minerals are chalcopyrite, pyrite, molybdenite, scheelite, bornite and tetrahedrite, etc. The oxidized orebodies contain malachite and covellite on the surface. The mineralization of the Nuri deposit is divided into skarn stage, retrograde stage, oxide stage, quartz‐polymetallic sulfide stage and quartz‐carbonate stage. Detailed petrographic observation on the fluid inclusions in garnet, scheelite and quartz from the different stages shows that there are four types of primary fluid inclusions: two‐phase aqueous inclusions, daughter mineral‐bearing multiphase inclusions, CO₂‐rich inclusions and single‐phase inclusions. The homogenization temperature of the fluid inclusions are 280°C–386°C (skarn stage), 200°C–340°C (oxide stage), 140°C–375°C (quartz‐polymetallic sulfide stage) and 160°C–280°C (quartz‐carbonate stage), showing a temperature decreasing trend from the skarn stage to the quartz‐carbonate stage. The salinity of the corresponding stages are 2.9%–49.7 wt% (NaCl) equiv., 2.1%–7.2 wt% (NaCl) equiv._, 2.6%–55.8 wt% (NaCl) equiv. and 1.2%–15.3 wt% (NaCl) equiv., respectively. The analyses of CO₂‐rich inclusions suggest that the ore‐forming pressures are 22.1 M Pa–50.4 M Pa, corresponding to the depth of 0.9 km–2.2 km. The Laser Raman spectrum of the inclusions shows the fluid compositions are dominated in H₂O, with some CO₂ and very little CH₄, N₂, etc. δD values of garnet are between ?114.4‰ and ?108.7‰ and δ¹⁸O_H2O between 5.9‰ and 6.7‰; δD of scheelite range from ?103.2‰ to ?101.29‰ and δ¹⁸O_H2O values between 2.17‰ and 4.09‰; δD of quartz between ?110.2‰ and ?92.5‰ and δ¹⁸O_H2O between ?3.5‰ and 4.3‰. The results indicate that the fluid came from a deep magmatic hydrothermal system, and the proportion of meteoric water increased during the migration of original fluid. The δ³⁴S values of sulfides, concentrated in a rage between ?0.32‰ to 2.5‰, show that the sulfur has a homogeneous source with characteristics of magmatic sulfur. The characters of fluid inclusions, combined with hydrogen‐oxygen and sulfur isotopes data, show that the ore‐forming fluids of the Nuri deposit formed by a relatively high temperature, high salinity fluid originated from magma, which mixed with low temperature, low salinity meteoric water during the evolution. The fluid flow through wall carbonate rocks resulted in the formation of layered skarn and generated CO₂ or other gases. During the reaction, the ore‐forming fluid boiled and produced fractures when the pressure exceeded the overburden pressure. Themeteoric water mixed with the ore‐forming fluid along the fractures. The boiling changed the pressure and temperature, oxygen fugacity, physical and chemical conditions of the whole mineralization system. The escape of CO₂ from the fluid by boiling resulted in scheelite precipitation. The fluid mixing and boiling reduced the solubility of metal sulfides and led the precipitation of chalcopyrite, molybdenite, pyrite and other sulfide.     

雅满苏铁矿床地质特征及成因浅析

雅满苏铁矿矿体的空间分布受成矿期断裂构造的控制，呈透镜状、舒缓波状延伸，分3个层位产出。铁矿的形成与火山热液活动关系密切，矿体中既有热液活动的特征又有矿质流体贯入的特征，早期热液活动形成交代充填型矿石，后期富铁流体贯入充填后形成品位较高的磁铁矿体。     

甘肃武威盆地页岩气“武页1井”成膜低固相冲洗液的应用

“武页1井”是甘肃省地质调查院实施的一口页岩气基础地质条件调查井,主要目的是为了查明页岩层段的分布。地层岩性主要为泥岩、砂岩、页岩、碳质板岩、灰岩。浅层倾角大、胶结性差、破碎、井壁强度低。现场采用成膜低固相冲洗液体系,解决了地层破碎、坍塌掉块和水敏性钻探施工难题,体系具有护壁性、抑制性和胶结性。使用中取得了较好的效果,保证了该项目的顺利施工。     

鲁西地壳隆升的伸展构造模式

伸展链锁断层系，形成了鲁西的主导造格局，即“块断”构造。它是由中、生代两次伸展运动形成的。伸展运动幔源岩浆活动有着密切的成生联系。伸展运动的结果，形成了以泰山－鲁山－沂山为核心的鲁中块隆，它至今耸立于周围以平原地貌为标志的地堑系之间，隆起的高点，就是当今的泰山。     

乌拉嘎金矿床地质地球化学特征研究

乌拉嘎金矿矿体赋存于燕山晚期的斜长花岗斑岩与黑龙江群下亚群接触带附近的近东西向展布的构造角砾岩中,围岩蚀变强烈;金矿化主要受角砾岩带控制。矿床成矿微量元素组合为Au、Hg、As、Sb,且含量均呈向下递增的趋势。LaN／YbN值变化范围为14．146～28．311,稀土元素配分模式为右倾的轻稀土富集型;∑LREE：165．76～62．68;∑HREE：45．82～15．2;LREE／HREE为6．09～4．124,为轻稀土富集型。岩体中流体包裹体以低盐、低压且有天水加入为特征,为典型的浅成低温热液型矿床。     

超深井高温钻井液技术概况及研究方向的探讨

[摘 要] 我国未来深部大陆科学钻探深度为12000m ～ 13000m,井底温度将达到350℃以上,钻井液将面临超高温高压环境,钻井液技术将面临严峻考验。本文重点介绍了国内外典型深井及超深井钻探和高温地热井钻探钻井液使用情况,提出了抗高温钻井液的主要技术难点是高温高压及污染条件下钻井液流变性、滤失量、润滑性控制。耐温250℃以上钻井液处理剂及体系、耐高温钻井液试验仪器和地面循环降温系统是超高温钻井液技术研究方向。