垫层对CFG桩复合地基影响的分析

对CFG桩复合地基垫层进行分析 ,探讨了垫层厚度和模量对桩土应力比、桩侧摩阻力、沉降变形、承载力的影响 ,并得出一些规律     

Simplified Method for the Assessment of the Stiffness Anisotropy of Rocks at Small Strains

Summary A new, practically applicable method for characterizing the stiffness anisotropy of rocks is presented. The anisotropy of geo-materials is often ignored in engineering applications, with potentially serious ramifications, because of the number of parameters required for characterization. The elastic anisotropy has often been considered to be a function of mathematical symmetry, and the restrictions due to layering, microcracking and granularity of the materials have not been considered in the assessment of the anisotropy. The practicality of the method proposed here is achieved by rationally reducing the number of independent anisotropy parameters, typically 9 for orthotropic anisotropy, to a system of 4 independent parameters through a systematic theoretical and experimental analysis of these structural restrictions. These 4 parameters are shown to be sufficient for describing the anisotropy of some rocks and sands at small strains, and parameter determination by back-analysis is demonstrated to be stable using appropriate measurement systems involving 9 elastic wave velocities even when the directions of anisotropic axes are unknown and the velocity data contains appreciable error.     

关于岩石圈有效弹性厚度的地质理解

简要回顾了岩石圈均衡理论的发展及岩石圈区域均衡和挠曲理论在岩石圈动力学研究中起的作用,阐述岩石圈有效弹性厚度(Te)的概念和特征。强调Te的研究是地质学和地球物理学的紧密结合,即通过岩石圈挠曲理论和区域均衡原理,对地形和重力资料进行谱分析计算,来获取岩石圈的物理性质信息。计算的Te(和相应的挠曲刚度)是岩石圈等效的强度,与爆破地震、地震层析成像和大地电磁测深等方法观测到的岩石圈和地壳厚度不同,它们之间只有通过岩石圈的屈服刚度包络面(YSE)才能比较。大洋和大陆岩石圈YSE的理论计算,表明Te值显著小于地震学的地壳和岩石圈厚度。尤其对于大陆岩石圈,地壳厚度、热年龄和应变率均可显著影响岩石圈的强度。本文还以滇西为实例介绍了对相干值曲线计算的新认识和当前岩石圈Te研究的最新趋势。     

Analytical prediction of aggregates' effects on the ITZ volume fraction and Young's modulus of concrete

In order to evaluate analytically the ITZ volume fraction (f_ITZ) in concrete, a three phase model is proposed for the random concrete microstructure using the Voronoï tessellation. Within this model, the ITZ local thickness is a statistical variable depending on the local paste thickness available between each couple of neighbouring aggregates. The f_ITZ is found to not exceed 7% for typical concretes. Then, the concrete Young's modulus is predicted analytically using a four‐phase generalized self consistent model but in which the proposed f_ITZ is considered. It is found that the concrete Young's modulus increases when increasing aggregates volume fraction, aggregates maximum size and the proportion of coarse aggregates and when decreasing the ITZ thickness and Young's modulus. Finally, the validity of the proposed model is discussed based on a comparison between its predictions and three sets of experimental results related to normal and high strength concretes taken from literature. Copyright © 2016 John Wiley & Sons, Ltd.     

Stress‐dependent elastic wave velocity of microfractured sandstone

A model for the stress‐dependent elastic wave velocity response of fractured rock mass is proposed based on experimental evidence of stress‐dependent fracture normal and shear stiffness. Previously proposed models and previous experimental studies on stress‐dependent fracture stiffness have been reviewed to provide a basis for the new model. Most of the existing stress‐dependent elastic wave velocity models are empirical, with model parameters that do not have clear physical meanings. To propose the new model, the rock mass is assumed to have randomly oriented microscopic fractures. In addition, the characteristic length of microfractures is assumed to be sufficiently short compared to the rock mass dimensions. The macroscopic stress‐dependent elastic wave velocity response is assumed to be attributed to the stress dependency of fracture stiffness. The stress‐dependent fracture normal stiffness is defined as a generalized power law function of effective normal stress, which is a modification of the Goodman's model. On the other hand, the stress dependency of fracture shear stiffness is modeled as a linear function of normal stress based on experimental data. Ultrasonic wave velocity responses of a dry core sample of Berea sandstone were tested at effective stresses ranging from 2 to 55 MPa. Visual observation of thin sections obtained from the Berea sandstone confirms that the assumptions made for microstructure of rock mass model are appropriate. It is shown that the model can describe the stress‐dependent ultrasonic wave velocity responses of dry Berea sandstone with a set of reasonable material parameter values. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.     

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.     

Inverse modelling using PS‐InSAR data for improved land subsidence simulation in Las Vegas Valley,Nevada

Las Vegas Valley has had a long history of groundwater development and subsequent surface deformation. InSAR interferograms have revealed detailed and complex spatial patterns of subsidence in the Las Vegas Valley area that do not coincide with major pumping regions. This research represents the first effort to use high spatial and temporal resolution subsidence observations from InSAR and hydraulic head data to inversely calibrate transmissivities (T), elastic and inelastic skeletal storage coefficients (S_ke and S_kv) of the developed‐zone aquifer and conductance (CR) of the basin‐fill faults for the entire Las Vegas basin. The results indicate that the subsidence observations from InSAR are extremely beneficial for accurately quantifying hydraulic parameters, and the model calibration results are far more accurate than when using only groundwater levels as observations, and just a limited number of subsidence observations. The discrepancy between distributions of pumping and greatest levels of subsidence is found to be attributed to spatial variations in clay thickness. The Eglington fault separates thicker interbeds to the northwest from thinner interbeds to the southeast and the fault may act as a groundwater‐flow barrier and/or subsidence boundary, although the influence of the groundwater barrier to this area is found to be insignificant. Copyright © 2016 John Wiley & Sons, Ltd.