联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法,针对北斗单系统实时建立电离层延迟格网的不足,提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网,并利用北斗单频单点伪距定位进行精度验证。结果表明,在有效格网点覆盖充足的地区,BDS与GPS实时电离层延迟格网定位效果相当;而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数,也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。     

青岛陆上观测点的气溶胶光学厚度特征分析及与渤海气溶胶光学厚度的比较

阐述了气溶胶散射对太阳光衰减的影响和对观测数据的统计分析.作者使用手持式五波段太阳光度计和臭氧监测仪对青岛崂山区陆域和渤海海域的大气衰减进行了较长时间的观测.分析表明,对可见光和近红外波段电磁渡的大气衰减贡献最大的是气溶胶散射,气溶胶散射的光学厚度随波长的增大而减小,但是它在大气总光学厚度中占的比例随波长的增大而增加.在青岛崂山区冬季,对应于440nm波长的气溶胶散射光学厚度主要分布在0.4～0.6和1.5～1.6区间,浑浊度系数α主要分布在0.15～0.45区间,埃斯特朗指数β主要分布在1.0～1.4区间.从时间上看,α和β在1d内的变化不大,但逐日变化非常显著.与晴天相比,青岛崂山区冬季雾天的气溶胶散射光学厚度增加了大约一倍,较大的浑浊度系数和较小的埃斯特朗指数表明,雾天的大气具有气溶胶散射的光学厚度大、粒子浓度大和粒径尺度大的特点.通过与海上观测数据的比较可见,青岛崂山区陆地冬季在雾天时的气溶胶分布与渤海夏季时相似,青岛崂山区陆地冬季在晴天无云时的气溶胶分布与渤海秋季时相似.     

Direct CPT and CPTu methods for determining bearing capacity of helical piles

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.     

软刚臂单点系泊系统静力特性分析

软刚臂系泊系统是一种利用压载质量为浮式生产储油装置(FPSO)提供回复力的单点系泊方式。为快速准确地评估多铰接组成的软刚臂系统的受力状态,避免应用高复杂度的有限元软件,进而快速完成优化设计等任务,建立一种静力计算方法十分有必要。因此,针对由刚臂(YOKE)、柔性系泊腿和压载舱组成的刚柔多体系统,以分解组合的方式,提出一种二维静力计算方法,用以研究FPSO软刚臂系泊系统的静力特性。该方法主要依靠软刚臂的几何构型,在有限铰接约束下,形成非线性静力平衡方程,建立了压载舱式水上软刚臂单点系泊系统二维静力平衡计算算法。采用OrcaFlex、SESAM等软件开展了理论和数值对比分析,同时与系泊试验结果开展验证分析。对比结果表明,文中所提方法计算精度较高,可为软刚臂单点系泊系统的研究提供可靠支持。     

土壤氡析出率活性炭累积吸附法

为解决大面积多点快速土壤氡析出率测量问题, 设计开发并进行了土壤氡析出率活性炭累积吸附法的方法技术研究.在参考氡析出率装置和野外实验数据的基础上, 进行了测量装置及材料的选择、装置刻度、野外累积暴露时间、活性炭盒吸附氡有效衰变常数等研究.通过2002-2003年22次重复观测, 北京西北郊区粘土类土壤氡析出率平均值为20.15mBq.m-2.s-1, 最大值和最小值分别为26.75和13.49mBq.m-2.s-1, 标准偏差为3.55mBq.m-2.s-1.与仪器静电收集法比对结果表明, 两种方法的相对误差小于±10%.实验结果表明: 活性炭方法测量结果稳定可靠, 简便易行, 适用于全国大面积土壤氡析出率调查.      

基于性能的地震工程研究的新进展及对结构非线性分析的要求

结合国际地震工程界提出的新一代基于性能的地震工程的框架方法,重点阐述了性能评估中涉及的主要问题。对性能评估使用的静力非线性分析、动力非线性分析方法进行了总结,在此基础上详细阐述了在基于概率的性能评估中有应用前景的增量动力分析方法的概念、相关问题及其应用,并简要介绍了基于增量动力分析思想提出的一些简化方法。最后提出了今后研究的建议,特别是结构非线性分析方面的研究重点。     

校正大地电磁测深中静态效应的首枝重合法

着重论述如何用首枝重合法校正静态效应。提出用等权正交多项式拟合视电阻率曲线真实位置；指出了选择参考频率的原则；以及如何自动识别是否有静态效应的影响，产生了何种形式的静位移。分析静校正处理后的资料可知，静态效应影响几乎无所不在，但在盆地沉积中心有可能无静位移情形；静位移的形式是多样的，但主体形式是ρ＿（ＴＥ）曲线向上，ρ＿（ＴＭ）曲线向下位移，且ρ＿（ＴＥ）曲线在ρ＿（ＴＭ）曲线之上；ρ＿（ＴＥ）曲线与ρ＿（ＴＭ）曲线基本上一样容易产生静位移。     

Reciprocity theorem to compute the static deformation due to a point dislocation buried in a spherically symmetric earth

Intriguing reciprocity relations exist between the static deformation excited by a point dislocation in a SNREI earth and those generated by external forces, such as tidal force, surface loading and surface shear forces. Coseismic deformations can be rewritten as follows: (1) potential change in terms of the tide deformation field, (2) radial displacement in terms of the load and tidal deformation fields, and (3) tangential displacement in terms of shear and torsional deformation fields. The relations greatly reduce the effort to compute the coseismic crustal deformation in a spherically symmetric earth.     

Static deformation of two welded half-spaces due to very long strike-slip dislocations

Closed form analytic expressions for displacement and stresses at any point of either of the two homogeneous, isotropic, perfectly elastic half-spaces in welded contact due to very long strike-slip dislocations are obtained. Both cases of vertical and horizontal strike-slip dislocations are discussed in detail. Variation of the displacement with horizontal distance from the fault and with vertical distance from the interface for a vertical strike-slip fault is studied numerically.     

Time-dependent behaviour of the rock mass

Summary The strength of intact rock and the rock mass is time-dependent. For intact rock experimental verification is available, for the rock mass the scale of time-dependence is a matter of judgement. Rock mass classifications do however emphasize the effect of time on tunnel stability. This paper examines the source of time-dependence in rocks and the rock mass and suggests a technique for estimating the long term strength. The long term strength of the rock mass is controlled by the time-dependent weakening of intact rock. Frictional resistance, a major source of rock mass strength, increases rather than decreases with time. Lifetime estimation for rocks can be accomplished phenomenologically or mechanistically. The first is a statistical process of wide applicability, the second is more restrictive in usage as its applies only to materials that suffer time-dependent strain (creep). Although the mechanistic route is more appealing, it has a major drawback as it concentrates on steady state creep. There is no strong evidence for steady state creep in rocks. The technique for long term prediction is developed through the analysis of the failure rate under constant load. The failure rate for a given load and environment is established from the frequency distribution of time-to-failure data as measured in static fatigue tests. As expected, the failure rate is strongly affected by both the loading and the environmental condition. The influence, however, is systematic and predictable.