Seismic response of a cable‐stayed bridge deck under multi‐component non‐stationary random ground motion

A Markov method of analysis is presented for obtaining the seismic response of cable‐stayed bridges to non‐stationary random ground motion. A uniformly modulated non‐stationary model of the random ground motion is assumed which is specified by the evolutionary r.m.s. ground acceleration. Both vertical and horizontal components of the motion are considered to act simultaneously at the bridge supports. The analysis duly takes into account the angle of incidence of the earthquake, the spatial correlation of ground motion and the quasi‐static excitation. A cable‐stayed bridge is analysed under a set of parametric variations in order to study the non‐stationary response of the bridge. The results of the numerical study indicate that (i) frequency domain spectral analysis with peak r.m.s. acceleration as input could provide more r.m.s. response than the peak r.m.s. response obtained by the non‐stationary analysis; (ii) the longitudinal component of the ground motion significantly influences the vertical vibration of the bridge; and (iii) the angle of incidence of the earthquake has considerable influence on the deck response. Copyright © 2003 John Wiley & Sons, Ltd.     

A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings

An Erratum has been published for this article in Earthquake Engng. Struct. Dyn. 2004; 33:1429. Based on structural dynamics theory, the modal pushover analysis (MPA) procedure retains the conceptual simplicity of current procedures with invariant force distribution, now common in structural engineering practice. The MPA procedure for estimating seismic demands is extended to unsymmetric‐plan buildings. In the MPA procedure, the seismic demand due to individual terms in the modal expansion of the effective earthquake forces is determined by non‐linear static analysis using the inertia force distribution for each mode, which for unsymmetric buildings includes two lateral forces and torque at each floor level. These ‘modal’ demands due to the first few terms of the modal expansion are then combined by the CQC rule to obtain an estimate of the total seismic demand for inelastic systems. When applied to elastic systems, the MPA procedure is equivalent to standard response spectrum analysis (RSA). The MPA estimates of seismic demand for torsionally‐stiff and torsionally‐flexible unsymmetric systems are shown to be similarly accurate as they are for the symmetric building; however, the results deteriorate for a torsionally‐similarly‐stiff unsymmetric‐plan system and the ground motion considered because (a) elastic modes are strongly coupled, and (b) roof displacement is underestimated by the CQC modal combination rule (which would also limit accuracy of RSA for linearly elastic systems). Copyright © 2004 John Wiley & Sons, Ltd.     

Approximate modal decomposition of inelastic dynamic responses of wall buildings

Two approximate methods for decomposing complicated inelastic dynamic responses of wall buildings into simple modal responses are presented. Both methods are based on the equivalent linear concept, where a non‐linear structure is represented by a set of equivalent linear models. One linear model is used for representing only one vibration mode of the non‐linear structure, and its equivalent linear parameters are identified from the inelastic response time histories by using a numerical optimizer. Several theoretical relations essential for the modal decomposition are derived under the framework of complex modal analysis. Various numerical examinations have been carried out to check the validity of the proposed modal decomposition methods, and the results are quite satisfactory in all cases. Fluctuating bending moment and shear at any location along the wall height contributed by each individual vibration mode can be obtained. Modal contributions to shear and flexural strength demands, as well as the corresponding modal properties, under various seismic loading conditions can also be identified and examined in detail. Furthermore, the effects of higher vibration modes on seismic demands of wall buildings are investigated by using the modal decomposition methods. Several new insights into the complicated inelastic dynamics of multi‐story wall buildings are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

兰州CAWS600-R自动站与人工观测资料对比分析

利用2002年11月到2003年2月兰州CAWS600-R型自动站与人工观测的温度、本站气压、水汽压、相对湿度、5～320cm地温等资料，分析了对比观测资料的差值。结果表明：对气温、本站气压、水汽压、相对湿度及320cm地温等要素观测误差较小，5～160cm地温的观测误差较大。自动观测仪器的系统性偏差、测量元件的精度及对气象要素变化响应的灵敏度、观测时间的差异和人为因素的影响是造成对比观测误差的原因。     

湖南汛期降水异常的时空分布特征研究

利用湖南19个测站23年(1959～2001年)4～9月的降水量资料，用EOF、REOF、小波分析对湖南汛期降水的特征场分布、分区特征、周期性和突变性等时空分布特征进行了诊断研究。研究结果表明：EOF分析得到的前三个典型场可以很好的反映湖南汛期降水空间分布的异常结构，即具有整体一致的空间结构，南北相反的空间结构，中部和周围地区相反变化的空间结构。旋转后的前6个空间模态可以较好地代表湖南汛期降水的6个异常敏感区：湘北、湘中、湘南、湘东南、湘西、湘东北。利用小波分析方法研究湖南汛期降水的周期性及其突变性发现，湖南汛期降水存在着明显的3年、7年和23年的特征时间尺度和周期性振荡；并且在今后相当长的一段时间内，湖南汛期的降水将逐年减少，并将转入干旱时期。     

国家气象中心客观要素预报--MOS系统

面向全国2000多个台站，应用数值预报产品释用MOS技术制作温度、降水、相对湿度、风、云量及能见度等要素预报，并实现了预报业务运行。通过建立MOS预报系统，表明预报因子和预报对象的处理、建方程前的参数选择以及预报因子的选取都会影响要素预报的质量，需要做大量的细致工作。预报检验结果显示，降水预报尚未达到可用程度．温度和相对湿度的短期预报在大多数情况下是可用的或是可参考的，但还有待进一步改进。降水预报尚需在预报因子和充分运用多种探测信息方面加以改进。     

高密度电法中的"异常扩展效应"及归位计算方法

对高密度电法勘探的异常扩展效应问题进行了较深人的分析；提出了利用相关分析进行归位计算的方法。通过对球体及板状体的Pole-Pole、Wanner-alpha装置的异常归位计算，表明该方法对复杂异常的解释具有效果。     

发现过程模型法对大港陆地探区油气资源的评价

对现有油气资源基本评价方法的原理、优缺点、适应性做了分析总结，重点剖析了在油藏总体分布服从帕莱托分布基础上建立起来的发现过程模型法．同时根据已建立的油气藏总体预测模型，对符合发现过程模型的大港陆地古近系成藏体系进行了油气资源评价。     

微波焙烧炉在分析测试中的应用研究

本文详细论述了微波焙烧炉代替马弗炉应用于样品焙烧、熔融、活性炭灰化工作中的实际效果。结果表明：其应用不但可行，而且与马弗炉相比，微波焙烧炉具有更加优越的经济性与环保效果。     

基于强度折减概念的滑坡稳定性三维分析方法(Ⅱ):加固安全系数计算

结合乌江洪家渡1#塌滑体加固设计工程,探讨了滑动面已知的条件下滑坡稳定性的三维分析方法。首先,模拟了塌滑体在天然状态下处于极限平衡状态时的滑动方向,并使用其应力成果计算了塌滑体的三维安全系数;其次,建议了基于强度折减概念的三维加固安全系数计算方法:最后,提出了加固设计的进一步优化方案。计算结果表明,塌滑体的滑动方向与局部地形等高线近于垂直。主滑方向变化较大,自后缘的NE15°方向逐步过渡到中部的NS向,最终过渡到前缘的NE30°方向,以致很难作出能表征主滑方向的地质剖面。基于应力计算成果的安全系数计算公式不能充分考虑滑坡体的抗滑潜能,也不能充分反映滑坡体的滑动方向,安全系数偏大。基于强度折减概念的三维加固安全系数计算方法具有有限元等方法的优点,较好地克服了上述局限性,可以合理地评价加固后的滑坡稳定性。