基于RFPA3D和微震监测的白鹤滩水电站左岸边坡稳定性分析

白鹤滩水电站左岸边坡受缓倾角软弱面及NW向断层影响,施工、运行期的边坡稳定性问题尤为重要。为研究左岸边坡在开挖卸荷过程中应力场、位移场分布规律,揭示岩体内部破坏失稳机制,利用RFPA3D（realistic failure process analysis）软件以拱轴线剖面为例建立准三维数值模型,再现坝基边坡岩体裂隙萌生、发育、扩展直至贯通的渐进损伤破坏过程。结合左岸边坡开挖卸荷及应力调整过程中的微震活动演化特征,圈定工程边坡潜在危险区域,探讨可能的失稳破坏模式。分析表明：基于离心加载法计算得到工程边坡开挖后安全系数为1.33;边坡表层区域受缓倾角错动带控制,变形破坏最为明显,以小范围楔形体滑移为主。该研究结果可为白鹤滩水电站坝基边坡后期施工提供依据,对于类似岩质边坡工程施工具有一定的指导作用。     

浙江西部建德群锆石LA-ICP-MS之U-Pb同位素年龄及其地层学意义

利用LA-ICP-MS测试技术对浙西地区中生代晚期寿昌盆地典型剖面建德群9件凝灰岩和安山岩样品的锆石进行了同位素测年分析。结果显示:建德群锆石206Pb/238U年龄加权平均值范围在134～115Ma之间,属于早白垩世中—晚期;其所属的劳村组、黄尖组、寿昌组和横山组的锆石年龄分别是134～125Ma、125～118Ma、125～121Ma和121～115Ma,各自对应于欧特里夫期—巴雷姆期、阿普特期早—中期、阿普特期早期、阿普特期中期。由此认为,黄尖组的时代与寿昌组+横山组大致相当,前者与后两者横向可能为同时异相,并非上下关系;在寿昌和丽水两个盆地的寿昌组近乎同时,其上为时代大致相当的横山组与馆头组。     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

基于正演模拟的复合曲流带砂体内部构型解剖研究及应用

Q油田是渤海大型河流相沉积的稠油油田,其北区NmⅣ1主力含油砂体为复合曲流带沉积,经过16年的注水开发,油水关系复杂,平面注水受效不均的问题日益严重,如何优化注釆结构来改善开发效果已成为急需解决的问题。优化现有注釆井网的关键是认识复合曲流带砂体内部不同单河道砂体的切叠关系及展布特征,即对目标砂体开展内部不同单河道的构型单元分布特征研究。首先,依据岩电标定的测井曲线特征、局部发育的薄夹层以及曲流河纵向下切模式,对复合砂体内部不同单河道砂进行划分与对比;然后基于单井沉积微相划分结果,开展井间剖面相对比分析,表明复合砂体内部存在5种不同单河道砂体切叠模式;建立5种正演概念模型,利用地震正演模拟合成地震记录,总结了不同单河道砂体间顶面高程差异、点坝边界、废弃河道等曲流河砂体构型边界的波形特征;利用地震属性提取及多种地质构型方法,综合分析,最终实现了海上大井距条件下复合曲流带砂体内部不同单一曲流河砂体构型边界的精细识别;最后由注采动态资料的响应关系评估不同的切叠模式对注水效果的侧向遮挡程度,并以此为依据,优化现有的注釆井网并取得了非常好的生产效果。     

一种适用于视频全站仪的数码相机检校方法

直接线性变换法是相机检校中常用的一种方法,在此基础上提出一种可应用于视频全站仪的数码相机检校方法,通过改变像方元素的单位,就可不必考虑标准单位和像素单位间的转化因子问题。进一步讨论了像素尺寸大小对系统误差的影响,并对像素大小的必要测定精度进行了公式推导。试验结果表明,该方法可以获得较好的校准结果。     

未来综合导航定位技术刍议

社会的发展和人们生活水平的不断提高,使得人们对位置及其相关信息的需求不断增加。未来人们对于导航定位技术的需求将是快速、高精度、高动态和无缝的。未来的综合导航定位技术主要包括单点快速高精度定位技术和特殊地区导航定位技术两大类。本文简要介绍了这两类导航定位技术的现状及今后的发展趋势。     

Single epoch GPS deformation signals extraction and gross error detection technique based on wavelet transform

IntroductionGPS technique is widely used for deformationmonitoring thanks for the high precision. Usual-ly , there are three working modes associatedwith GPS deformation observation: periodicalGPS deformation monitoring net , GPS monito-ring array and rea…     

山东地壳运动GPS观测网的建设与初步结果分析

简述山东地壳运动GPS观测网的建设和数据处理的基本方法，并对系统所得的初步结果进行分析，分析表明，该系统可产出连续、高精度的GPS基准站三维坐标及基线数据，可为地震监测和地壳运动的科学研究提供良好的GPS数据素材。     

Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.