Seismic performance of a 3D full‐scale high‐ductile steel–concrete composite moment‐resisting frame—Part II: Test results and analytical validation

This paper presents the results of a multi‐level pseudo‐dynamic seismic test program that was performed to assess the performance of a full‐scale three‐bay, two‐storey steel–concrete composite moment‐resisting frame built with partially encased composite columns and partial‐strength beam‐to‐column joints. The system was designed to develop a ductile response in the joint components of beam‐to‐column joints including flexural yielding of beam end plates and shear yielding of the column web panel zone. The ground motion producing the damageability limit state interstorey drift caused minor damage while the ultimate limit state ground motion level entailed column web panel yielding, connection yielding and plastic hinging at the column base connections. The earthquake level chosen to approach the collapse limit state induced more damage and was accompanied by further column web panel yielding, connection yielding and inelastic phenomena at column base connections without local buckling. During the final quasi‐static cyclic test with stepwise increasing displacement–amplitudes up to an interstorey drift angle of 4.6%, the behaviour was ductile although cracking of beam‐to‐end‐plate welds was observed. Correlations with numerical simulations taking into account the inelastic cyclic response of beam‐to‐column and column base joints are also presented in the paper together. Inelastic static pushover and time history analysis procedures are used to estimate the structural behaviour and overstrength factors of the structural system under study. Copyright © 2008 John Wiley & Sons, Ltd.     

Hybrid formulation of operator splitting (OS) and Newmark‐β methods for collaborative structural analysis (CSA)

A collaborative structural analysis (CSA) system is developed, which is capable of performing highly sophisticated structural analyses utilizing beneficial features of existing individual structural analysis programs. In the system, the global equations of motion for the overall structural system are formulated in the host program. Some substructures, whose behaviors are relatively simple, are directly solved in the host program, whereas those having complex behavior are analyzed by the station programs. A time‐consuming static condensation procedure is needed for the substructures analyzed by the station programs if adopting an implicit integration scheme. The operator splitting (OS) method, which does not require tangential stiffness, can be used to improve the system efficiency. To this end, a hybrid formulation of the Newmark‐β and OS methods is proposed, and a CSA scheme based on the hybrid formulation is developed. In the CSA system adopting the hybrid formulation, the degrees of freedom whose tangential stiffness are unavailable are formulated by the OS method, whereas the rest are still formulated by the commonly used Newmark‐β method. Using the system, analyses of a three‐story‐braced steel moment‐resisting frame are conducted. In the analyses, the column bases are analyzed using the commercial finite element method software ABAQUS, and the remaining structural elements are analyzed using a frame analysis program called NETLYS. Results suggest that the hybrid formulation is very effective for the CSA system. Copyright © 2008 John Wiley & Sons, Ltd.     

Seismic design and response evaluation of unbonded post‐tensioned hybrid coupled wall structures

This paper presents an analytical investigation on the seismic design and response of coupled wall structures that use unbonded post‐tensioned steel coupling beams. Both monolithic cast‐in‐place reinforced concrete wall piers and precast concrete wall piers are considered. Steel top and seat angles are used at the coupling beam ends for energy dissipation. The seismic design of prototype structures to achieve target displacement‐based performance objectives is evaluated based on nonlinear static and dynamic time history analyses. Additional recommendations are provided on shear design. Comparisons with ‘conventional’ structures that use embedded steel coupling beams as well as isolated walls with no coupling are provided. The results indicate that while the peak lateral displacements of unbonded post‐tensioned coupled wall structures are larger than the peak displacements of structures with embedded beams, the residual displacements are significantly reduced as a result of the restoring effect of the post‐tensioning steel. Copyright © 2008 John Wiley & Sons, Ltd.     

Parametric study of ductile moment‐resisting steel frames: A first step towards Eurocode 8 calibration

A parametric study of 13 608 ductile moment‐resisting steel frames designed according to Eurocodes 3 and 8 is performed. A flowchart for the evaluation of the seismic‐resistant capacity of the designed frames is developed based on the N2 method. The design structural overstrength, ductility supply, plastic redistribution parameter, supply reduction factor and performance ratio of the frames are analysed. We determine that the frames have performance ratios higher than 1, mostly due to high values of design structural overstrength, showing that the seismic supply produced by the restraints of Eurocodes 3 and 8 is always higher than the seismic demand. Copyright © 2008 John Wiley & Sons, Ltd.     

辽宁海城-岫岩地区尾波Q值研究

本文利用Sato单次散射模型,研究1999年至2007年辽宁海城-岫岩地区尾波Q值随时间的变化情况及1999年岫岩5.4级地震和2000年5.1级两次中强地震发生阶段该地区的尾波Q值变化。计算结果表明:该区在地震活跃阶段,Qc值随时间变化起伏较大,平均值相对较高,在岫岩5.4级主震前有短时升高现象,之后Qc值并没有明显的降低,直到强余震序列结束之后Qc值逐步降低,趋于平稳,通过对比该区在地震活跃阶段与平静阶段的Qc值变化,可以为未来该区的强震预测提供参考依据。     

Seismic vulnerability evaluation of axially loaded steel built-up laced members I： experimental results

An experimental program was initiated to investigate the seismic performance of built-up laced steel brace members. Quasi-static testing of twelve typical steel built-up laced member （BLM） specimens was conducted. These were designed to span a range of parameters typically encountered for such members based on findings from a survey of commonly used shapes and details that have been historically used. The specimens were subdivided into groups of three different cross-sectional shapes, namely built-up I-shape section, and built-up box shapes buckling about the x or the y axis. Within each group, global and local buckling slenderness ratios had either kl/r values of 60 or 120, and b/t ratios of 8 or 16. The specific inelastic cyclic behavior germane to each specimen, and general observations on overall member hysteretic behavior as a function of the considered parameters, are reported. A companion paper （Lee and Bruneau 2008） investigates this observed response against predictions from analytical models, and behavior in the perspective of system performance.     

Seismic vulnerability evaluation of axially loaded steel built-up laced members Ⅱ： evaluations

The test results described in Part 1 of this paper （Lee and Bruneau, 2008） on twelve steel built-up laced members （BLMs） subjected to quasi-static loading are analyzed to provide better knowledge on their seismic behavior. Strength capacity of the BLM specimens is correlated with the strength predicted by the AISC LRFD Specifications. Assessments of hysteretic properties such as ductility capacity, energy dissipation capacity, and strength degradation after buckling of the specimen are performed. The compressive strength of BLMs is found to be relatively well predicted by the AISC LRFD Specifications. BLMs with smaller kl/r were ductile but failed to reach the target ductility of 3.0 before starting to fracture, while those with larger kl/r could meet the ductility demand in most cases. The normalized energy dissipation ratio, EC/ET and the normalized compressive strength degradation, Cr″/Cr of BLMs typically decrease as normalized displacements δ/δb,exp increase, and the ratios for specimens with larger kl/r dropped more rapidly than for specimens with smaller kl/r; similar trends were observed for the monolithic braces. The BLMs with a smaller slenderness ratio, kl/r, and width-to-thickness ratio, b/t, experienced a larger number of inelastic cycles than those with larger ratios.     

Nonlinear finite element analysis of high-strength concrete columns and experimental verification

This paper describes a nonlinear finite element （FE） analysis of high strength concrete （HSC） columns, and verifies the results through laboratory experiments. First, a cyclically lateral loading test on nine cantilever column specimens of HSC is described and a numerical simulation is presented to verify the adopted FE models. Next, based on the FE model for specimen No.6, numerical simulations for 70 cases, in which different concrete strengths, stirrup ratios and axial load ratios are considered, are presented to explore the effect of these parameters on the behavior of the HSC columns, and to check the rationality of requirements for these columns specified in the China Code for Seismic Design of Buildings （GB 50011- 2001）. In addition, three cases with different stirrup strengths are analyzed to investigate their effect on the behavior of HSC columns. Finally, based on the numerical results some conclusions are presented.     

爆炸应力波对新浇混凝土衬砌的影响研究

爆炸应力波作用下新浇混凝土衬砌的破坏模式及安全振动速度是水电、铁道工程隧洞建设中需要解决的重要问题。根据弹性P波及SV波在介质中的传播规律,讨论了P波及SV波在薄层混凝土衬砌中的传播及近似处理方法,依照莫尔-库仑准则、极限拉应力准则、极限拉应变准则,研究了爆炸应力波作用下新混凝土衬砌的破坏模式及安全振动速度。结果表明,入射应力波及衬砌中的折射波对衬砌的破坏作用最主要,折射波在衬砌内产生的反、折射波将降低衬砌中的应力,具有卸载效果;混凝土衬砌的安全振动速度随着龄期的增大而增大,P波入射时,安全振动速度随着入射角的增大而增大,入射角较大时,胶结面容易发生剪切破坏,较小时,容易发生拉伸破坏,SV波入射时,较小角度下容易发生剪切破坏,较大角度时容易发生拉伸破坏;围岩弹性模量越高,衬砌的安全振动速度越小。