Design of Inclined Covers with Capillary Barrier Effect

A design procedure is proposed to minimize water infiltration into landfills by optimizing the water diversion length of inclined covers with capillary barrier effect (CCBE). This design procedure is based on a conceptual, mathematical and numerical approach and aims at selecting materials and optimizing layer thickness. Selection among candidate materials is made based on their hydraulic conductivity functions and on a threshold infiltration rate imposed on the designer. The capillary break layer (CBL; bottom layer) is characterized by a weak capillarity, while the moisture retention layer (MRL; upper layer) is characterized by a compromise between strong capillarity and high hydraulic conductivity. The thickness of the CBL corresponds to the height where suction reaches its maximum value for a given infiltration rate. This height can be calculated using the Kisch [Géotechnique 9 (1959)] model. The optimal thickness of the MRL is determined by applying an adaptation of the Ross [Water Resources Research 26 (1990)] model. The results obtained using the proposed design procedure were compared to those obtained from numerical simulations performed using a finite element unsaturated seepage software. The procedure was applied for two cover systems; one where deinking by-products (DBP) were used as MRL and sand as CBL and another where sand was used as MRL and gravel as CBL. Using this procedure, it has been shown that an infiltration control system composed of thin layers of sand over gravel is highly efficient in terms of diversion length and that its efficiency can be enhanced by placing a hydraulic barrier – such as a layer of DBP – above the MRL.     

The Alcamayo and Cedrobamba catastrophic debris flow (January, March and April 2004) in Machupicchu area—Peru

A debris flow originating from the Alcamayo River on 10th April 2004 destroyed a part of the town of Aguas Calientes, resulting in 11 victims, and with serious affects to the tourist flow to the Machupicchu inka citadel. On the same day, as well as in January and March 2004, other similar phenomena occurred on the Cedrobamba and Leonchayoq Rivers, affecting the railway and an electrical tower, and disrupting the train service.     

Interpreting tracer breakthrough tailing in a conduit-dominated karstic aquifer

Breakthrough tailing has been observed during dye-tracing recovery tests in the Norville aquifer system (chalk), France. Karst-conduit flow and transport parameters were assessed using two different interpretative methods: the linear graphical method and the Chatwin method (implemented in the Qtracer2 program). The linear graphical method was used to model the observed tailing effects, which was explained by a second smaller delayed breakthrough curve. By comparing the results of tracer-test interpretation for the two methods, it was possible to relate the area of this second curve to the importance of turbulent flow in spring discharge. The more turbulent the flow, the less important the contribution of the second breakthrough curve and the tailing effect. The observed tailing could possibly be controlled by hydrodynamics to a greater extent than usually expected, the tailing effects being mostly attributed to diffusion phenomena. Tailing effects were expected to increase with discharge and the piezometric level, which would have resulted in overpressure in conduits, fissure flooding, etc. Instead, breakthrough tailing tended to disappear with increasing aquifer discharge, which would support the hypothesis of there being mostly hydrodynamic-controlled tailing effects instead of matrix- or fissure-diffusion.An erratum to this article can be found at     

Chemical characterization of the Neogene Aquifer, Belgium

The evolution of groundwater chemistry along the direction of groundwater flow was studied using hydrochemical data from samples collected along a flow line in the Neogene Aquifer, Belgium. Infiltrating water was found to have a very low mineral content and low pH because the sediments are strongly decalcified. Increasing SiO₂ and cation concentrations along the groundwater flow line indicate silicate-weathering processes, confirmed with the aid of saturation indices, calculated with PHREEQC, and stability diagrams. A classification system based on redox sensitive species was developed and shows that an extensive redox sequence is present in the aquifer. At a shallow depth, pyrite oxidation has caused an increase in sulphate, while iron is precipitated as hydroxides. Elevated arsenic concentrations are related to the reduction of these iron hydroxides at a relatively shallow depth and to the dissolution of siderite at greater depth. Dissolution of carbonate in the aquifer material, present in deep layers and to the north, has lead to increased Ca²⁺ and HCO₃ ^? concentrations. The Ca²⁺ from the groundwater is exchanged for Na⁺, Mg²⁺ and K⁺ adsorbed to the clay surfaces at the bottom of the groundwater reservoir. Although the Neogene Aquifer is well flushed, there are still some marine influences present in the deepest parts.     

Some Observations on the Use of Data from Historical Documents in Debris-Flow Studies

The knowledge of past events is important for the assessment of debris-flow hazard. Amongst the sources of information, documents from historical archives are particularly important in sites where the debris flows cause damage to urban areas and transportation routes. The paper analyses the availability of historical documents on debris flows in Northeastern Italy and discusses factors that can influence the building of time series from archive data both at regional and single basin scales. An increased number of debris flows was observed in the studied region for the last decades. This could be due both to an increased frequency of the events and to a larger availability of information: the analysis carried out indicates that the latter factor is probably the most influencing. The importance of factors, which affect the collection of data, including the conservation of documents and the presence and fragility of the elements at risk, is stressed in view of a wise use of historical data on debris flows.     

大洋粘土制备白炭黑后的铝回收实验研究

为了回收大洋粘土制备白炭黑后残液中的Al3 ,并获得氧化铝超细粉体,实验选用NH3.H2O为沉淀剂,在常温下采用沉淀法使残液中Al3 以氢氧化铝形式沉淀并去除其它杂质离子,然后将得到的沉淀在1200℃灼烧,保温1h。利用IR和XRD测试了产物的物相组成和结构,证实实验可以获得纯度较高的α-Al2O3;而SEM和粒度分析结果显示产物粒度细小,部分颗粒可以达到纳米级;BET结果显示Al2O3的比表面积可达32m2/g。根据氧化铝结构和性能等优选的实验条件为大洋粘土的进一步开发利用提供了参考依据。     

数据备份服务器备份性能分析

针对数据备份服务器备份性能优化问题，分别对实时数据存储与历史数据备份之间的关系、数据备份服务器所备份的数据类型非唯一性、客户数量对备份服务器备份效率的影响三方面进行初步的测试与分析，提出了通过优化数据块的选取、优化数据采集方式、优化备份策略提高备份服务器备份效率的基本方法。     

中国大陆科学钻探工程主孔100～2000 m 放射性产热元素的垂向分布特征及其成因

地球内部放射性产热元素U、Th及K(HPE)含量如何随深度的变化而变化是固体地球科学中的一个重要参数,在限定地壳的热和流变学结构、地球化学、岩石和构造模型中起关键性的作用。对HPE深部分布的认识主要来自于对大型花岗岩岩基的研究及对地表热流值和产热率之间关系的模拟,对高压-超高压变质地体的HPE随深度的分布缺乏认识。在苏鲁超高压变质带中实施的中国大陆科学钻探工程届时将提供超过5km的岩心,为确定苏鲁超高压带的HPE结构提供了最好的机会。对CCSD的100～2000m岩心的732块样品详细的放射性产热元素含量的测试及现今产热率计算的初步结果表明:(1)花岗质片麻岩具有最高的产热率,平均为1665×10-11W/kg;(2)副片麻岩(变沉积岩)具有中等的产热率,为994×10-11W/kg;(3)金红石榴辉岩及石榴石橄榄岩具有最低的产热率,为17×10-11～20×10-11W/kg;(4)放射性产热元素的浓度及相应的产热率随岩性的变化而变化,呈现阶梯状的分布特征。产热率随深度的变化特征表明CCSD主孔中的HPE三明治结构。该结构可能代表着高压-超高压变质地体中的典型HPE结构,比大型花岗岩岩基的HPE结构更复杂,与传统的HPE指数衰减分布模式不吻合。CCSD主孔中所揭示的三明治式HPE结构是大陆被动陆缘中的基性及超基性岩、沉积岩及花岗岩在深     

低频泥石流特征及防治 --以四川汶川县茶园沟为例

低频泥石流指30a以上发生1次的泥石流。尽管发生频率很低，但由于自身的特征及人们认识上的原因，其造l戒的人员伤亡和财产损失却居各类泥石流之首。对低频泥石流的研究在预防和减轻泥石流灾害方面有着重要意义。文章以2003年8月9日发生在四川汶川县茶园沟的泥石流为蒯，采用形态调查法和称重法等方法确定了流量、流速及重度。分析了其物质来源及形成的自然和人为原因，探讨了低频泥石流的特征。针对低频泥石流的低频性、破坏性和隐蔽性特点，同时考虑到低频泥石流沟的防治受保护对象的重要程度及资金投入等因素的限制，提出了进行泥石流危险性分区、搞好小流域水土深持、普及泥石流防灾减灾知识及加强监测和预警预报等措施，这对减轻低频泥石流区的灾害有一定的借鉴意义。     

泥石流汇流槽可靠度分析

汇流槽是泥石流治理工程中常用的工程措施之一。文章基于汇流槽的倾倒破坏、滑移破坏及地基破坏模式，通过对汇流槽设计影响强烈的岩土参数、几何特征、荷载因素等敏感因子的求解方法及分布特征分析，从汇流槽的抗倾稳定、抗滑稳定和基底应力要求三方面建立极限状态方程。对于每个极限状态方程，在泰勒级数对非线性极限状态方程线性化后，运用一次二阶矩的理论，先假定失效点P^＊，求解出相应的均值和方差。然后根据可靠的定义，得到相应的可靠度指标，通过迭代法求解真正失效点的可靠度指标βi。最后根据3个状态方程相互独立的假定，得出整个结构的可靠度指标β。该方法在平川泥石流防治工程中得到了成功的运用。这对于可靠度设计方法在泥石流防治工程中的运用进行了有益的探讨。