冻融循环作用下含水率对粗颗粒填料水分迁移影响的宏细观试验研究北大核心CSCD

冻融循环作用和初始含水率是影响粗颗粒填料水分迁移特征和冻胀融沉变形的两个主要因素。为明确冻融循环作用下,不同初始含水率粗颗粒填料的水分迁移特征及细观机制,采用荧光素为追踪剂,以CT细观机理观测为研究手段,开展了不同初始含水率条件下粗颗粒填料的一系列冻融循环试验,探究了温度场和冻深变化、水分迁移图像、补水量变化、最终含水率分布及CT值变化规律等。试验结果表明,冻深基本随冻融循环的次数增加不断加深,初始含水率越大,不同冻融循环作用下冻深的变化越稳定。外界补水量和液态水迁移高度与初始含水率呈负相关。CT扫描结果分析表明,经历多次冻融循环后,试样中的水分迁移导致土体孔隙结构及颗粒构造发生变化,试样的密度普遍增加,孔隙率以减小为主,进而导致土体发生相应变形。     

2011年中国4次成灾性气候异常及其原因分析

为了研究地震与气候异常的关系,从地震活动的角度对2011年发生在我国的4次成灾性气候异常进行了分析.结果表明,2011年长江中游春、夏季大旱的直接原因是3月24日发生在缅甸的7.2级地震;长江中下游6月上旬出现旱涝急转则与3月11日日本东部的9.0级地震及缅甸地震密不可分;鄂赣交界发生的4.6级地震对黄河中游秋汛的影响最为明显,这是“震侧强涡”造成的结果;2012年1月贵州冻雨较多也是受到印度锡金和我国东海两个地震形成的“拍涡”影响,这表明地震活动是影响天气、气候变化的可能原因之一.     

实时相关跟踪图像处理系统

文章介绍了怀柔太阳观测基地最近完成的一套实时高分辨太阳磁场观测系统。系统采用局部相关跟踪算法来提高磁场观测数据的空间分辨率，同时对相关跟踪算法的实现程序进行了优化以满足常规太阳磁场观测的要求。通过对试观测和常规观测数据的分析，我们发现：1）该系统能够大大提高单色像、磁场数据的对比度和空间分辨率；2）对相关跟踪算法的优化大大提高了系统的时间分辨率，系统可以投入常规观测使用。     

道路平面测设计算的通用公式

基于各类道路线型曲率呈线性变化的共同特性,给出了线元上任意点坐标方位角的统一计算公式,进而提出了适用于所有道路线型平面测设计算的中桩坐标、边桩坐标的通用公式。在此基础上,讨论线路外一点对应中桩的计算以及直线与线路交点的计算,给出了相应的计算方案。     

广州地铁五号线第三方水平位移监测的实践

通过广州地铁五号线土建施工第三方监测实践,介绍并分析TCA2003智能型全站仪在极坐标法水平位移监测中的适用性,提出平面位移量的计算方法,总结了第三方水平位移监测的方法和技术要点。     

高原南侧地形槽与孟湾槽的形成演变特征及其与南海夏季风建立的关系

使用1981—2000年NECP/NCAR再分析数据集资料,分析了全年各月大气环流特征,发现青藏高原(下称高原)南侧低空基本上存在一个常年正涡度带,这是高原近地面西风与其外围自由大气西风之间的气旋性切变的表现。特别是在90°E附近有一明显的地形槽,我们选取80°~90°E,25°N关键区域内的涡度作为表征该地形槽的指数,分析了高原南侧地形槽与孟加拉湾(下称孟湾)槽形成和演变特征的异同,并探讨其与南海夏季风建立的关系。结果表明,高原南侧地形槽的季节性演变与高原热源联系非常密切,其显著的4月突变和6月突变与高原热源发生跳跃性变化相联系。冬季高原冷却作用形成低空反气旋环流,叠加在原本增强的大尺度西风绕流上,促使高原地形槽减弱;由春入夏,高原加热作用形成低空气旋性环流,增大西风绕流作用,促使高原地形槽加深。高原地形槽加强南伸和斯里兰卡低涡持续北移直至二者相互打通是亚洲低纬度副热带高压带在孟湾上空最先断裂和孟湾槽形成的一种触发机制,此后槽前西南气流加强,副热带高压东撤,南海夏季风进一步东扩,最后导致南海夏季风建立。     

Analysis of small-scale heterogeneity in clastic rocks by using computerized X-ray tomography (CT)

The aim of this study is to recognize the basic clastic rock types on the basis of Hounsfield Units (HUs) by using statistical methods (hypothesis tests, distribution fitting, and confidence intervals). How does this recognition depend on depositional history of samples tested? Does the numerical pattern of HUs obtained from small-scale analyzing of some particular sedimentary structures coincide to the textural expectations of those sedimentary structures? Are the HU values provided by the CT measurements capable of evidencing micro-cycles belonging to a particular depositional history?For testing the numerical recognition, we analyze macroscopically homogeneous argillaceous marl, siltstone and fine sandstone samples with similar depositional background, age, and degree of diagenesis. The preliminary research shows that the Hounsfield Units can identify different sedimentary rocks considerably well. There are significant differences among the confidence intervals belonging to the different rock types. However, there also have been some slight overlaps among them.For analyzing the effects of the depositional processes in case of a particular rock type, samples from channel sandstone, distributary mouth-bar, massive (structureless) sandstone from a delta-fed turbidity fan, and channel sandstone with traction carpet origin from a delta-fed turbidity fan (all coming from Pannonian basin filling series) are used. The results prove again the significant differences in the terms of both confidence intervals and distribution-types; however, some overlapping also occurs.     

The use of X-ray tomography in the study of water repellents and consolidants

To reduce the weathering rate of natural building stones, a wide variety of water repellents and consolidants are commercially available. Although a lot of research is performed on these products, it remains difficult to determine which product is appropriate to use for a certain type of building stone. Each type of building stone has its own petrographic characteristics (mineralogy, texture, …), leading to typical physical and technical properties which influence its rate of decay. The localisation of the products inside a stone type is not only depending on the properties of the products themselves, but also linked to the texture and structure of the stone. The impregnation depth of the products strongly influences their efficiency and is therefore a key issue in the determination if a product is functional for a certain type of stone. X-ray micro-CT has recently been introduced as a non-destructive material evaluation technique for engineering and geology purposes. The fact that micro-CT can provide information about the internal structure and properties of natural building stones, is a major advantage in the study of their conservation. Firmly linked with more classical research techniques, this non-destructive technique offers an extra dimension to the cultural heritage research.In this paper, non-destructive X-ray computed micro-tomography (micro-CT) turns out to be a powerful tool as it can visualise the presence of water repellents and consolidants inside the stone and can help to detect the influence that these treatments exert on porosity and pore-size distribution. For the visualization of the product its atomic number and density and the amount of product inside the natural building stone is crucial. Besides the contrast in attenuation, the resolution of the micro-CT also needs to be taken into account to obtain a good contrast between stone and product. By doping with 3-bromopropyltrimethoxysilane, more contrast occurs between the stone material and the conservation product. When the amount of product inside the samples is very low and the product is homogeneously spread inside the sample, the doped product is difficult to distinguish from the stone material due to the resolution of the micro-CT. When the amount of doped product inside the stone material reaches a certain threshold value, the dope will appear in the 2D cross-sections derived from micro-CT, creating a good visualization of the products inside the stone samples.     

青藏高原东北侧7月少雨流型的研究

根据青藏高原东北侧9个代表站1951—2000年历年7月的降水量资料,确定了5个多、少雨年。再用NCEP／NCAR再分析格点资料,分别求出850,700,600,500,200,100,70,50和30hPa共计9个层次上多、少雨年份7月月平均合成位势高度场。计算了500hPa合成高度场与其余各个层次合成高度场流型的相似性度量以及各个层次的东亚北风指数。结果表明：20世纪80年代提出的1300hPa层次上高原东北侧“西正东负”少雨流型的特征在850～70hPa整层大气中仍然存在。同时．7月少雨流型与平流层低层70,50hPa前期环流特征之间也存在联系,这些结果可供西北干旱形成研究和干旱预测业务参考。     

青藏高原东北侧冰雹微物理过程模拟研究

以青藏高原东北侧及毗邻地区诱发冰雹灾害的东移短小切变线天气过程为研究背景,采用中国科学院大气物理研究所三维冰雹云分档模式,用MM5V3中尺度气象模式提供冰雹云模拟研究所需的环境大气状况,模拟研究了冰雹形成和增长的微物理过程。结果表明：模式再现了当时冰雹、大风及暴雨的实况;中尺度水分和动力条件是冰雹形成和增长的重要因素,它们决定了冰雹云的强度和冰雹的大小;冰雹形成和增长过程中的微物理过程决定了冰雹云的消亡,冰雹在空中形成的潜热释放延长了降雹的时间;云中冰雹发生、增长的主要区域和云内上升气流配合良好,是防雹消雹的主要范围。