TGQ系列勘察取样钻机(具)的研究

取样钻技术是区域地质填图、物化探取样、古地磁取样、地质灾害预警防治和工程勘察等必不可少的技术手段。TGQ系列勘察取样钻机包括TGQ-1、5、10三个型号，分析了其结构、特性和特点，以及配套钻具和取样器。     

塔里木盆地南缘历史时期气候环境变化的过程与特征

根据塔里木盆地南缘具较高分辨率的湖沼相沉积物碳酸盐δ^13C和粒度等记录，恢复出2162-850BC期间为一相对稳定的温暖干旱时期，之后迅速转冷湿，湿润程度呈持续、阶段式增加，50 BC至500 AD期间呈现的显著冷湿特征于550 AD之后突变转暖干而结束。550 AD和1000 AD前后的具突变性质的气候事件在南疆地区近2．0ka的气候变化中具有重要意义，反映气候状况有过重大调整。850—1300AD期间(相当于中世纪温暖期)冷暖、干湿多变，但温暖特征并不明显。特别是1100—1200AD期间气候快速、频繁变化之后，奠定了本地区现代稳定干旱环境特征。区域对比表明，尼雅剖面记录的气候变化具有广泛的区域一致性。     

用GPS秒信号锁定高频振荡器的方法研究

对用远距离传输的GPS秒信号锁定本地高频晶体振荡器的方法进行了探讨。介绍了高精度的时间数字转换器TDC(Time to Digital Converter)和对滤波的方法进行了探讨。为了降低成本又能够满足设计要求的精度，还考虑了双D／A转换的方法。有关的硬件系统已经通过了调试和一系列的测试和实验，在测量和控制精度方面，能达到设计的要求。此外，提出了这个系统有待解决的问题，如双D／A转换的非线性问题，Kalman滤波抗野值及继续提高精度的问题。     

地心非旋转坐标系中的TWSTT计算模型

根据卫星双向时间传递(TWSTT)的基本原理，详细推导了地心非旋转坐标系中TWSTT的计算模型．并与地固系中的计算模型进行了分析比较，证明了两种计算模型在0．1ns亚纳秒量级上的等价性。     

建筑物沉降规律的综合时序分析

建筑物的沉降监测数据序列具有趋势变化和随机变化的特点，本文针对两种变化项的特点分别建立相应的数学模型，再将其组合起来建立综合数学模型，从总体上把握沉降数据序列的变化规律。实例计算分析表明，此方法具有较高的拟合精度和预测能力，具有一定的应用参考价值。     

复种指数遥感监测方法

复种指数是反映水土光与自然资源利用程度的指标 ,其实质是沿时间序列 ,反映某一种植制度对耕地的利用程度。联系复种指数与时间序列NDVI曲线的纽带是农作物年内的循环规律。时间序列的NDVI值蕴涵着植被的生长和枯萎的年循环节律 ,经时间序列谐函数分析法 (HarmonicAnalysisofTimeSeries ,HANTS)重构的NDVI曲线 ,可以准确地反映农作物的出苗、拔节、抽穗、收获等物理过程。因此 ,根据时间序列的NDVI曲线的周期性 ,可以反向捕捉到耕地农作物动态的信息 ,进而得到耕地的复种指数。本文依据上述原理 ,提出复种指数遥感监测的方法 ,然后用 1999年至 2 0 0 2年 4年的VGT(SPOT4卫星vegetation数据 )旬合成NDVI时间序列数据集提取了复种指数 ,并利用地面样区观测结果和统计数据进行检验 ,取得很高的精度。     

2-D crustal Poisson's ratio from seismic travel time inversion in Changbaishan Tianchi volcanic region

Based on the inversion method of 2D velocity structure and interface, the crustal velocity structures of P-wave and S-wave along the profile L1 are determined simultaneously with deep seismic sounding data in Changbaishan Tianchi volcanic region, and then its Poisson's ratio is obtained. Calculated results show that this technique overcomes some defects of traditional forward calculation method, and it is also very effective to determine Poisson's ratio distribution of deep seismic sounding profile, especially useful for study on volcanic magma and crustal fault zone. Study result indicates that there is an abnormally high Poisson's ratio body that is about 30 km wide and 12 km high in the low velocity region under Tianchi crater. Its value of Poisson's ratio is 8% higher than that of surrounding medium and it should be the magma chamber formed from melted rock with high temperature. There is a high Poisson's ratio zone ranging from magma chamber to the top of crust, which may be the uprise passage of hot substance. The lower part with high Poisson's ratio, which stretches downward to Moho, is possibly the extrusion way of hot substance from the uppermost mantle. The conclusions above are consistent with the study results of both tomographic determination of 3D crustal structure and magnetotelluric survey in this region.     

再论各向异性介质转换波地震学,第一部分:理论

我们业已研发了计算各向异性、非均质介质中P- SV转换波(C-波)的转换点和旅行时的新理论。据此 可以利用诸如相似性分析、迪克斯模型建模、克契 霍夫求和等常规方法来完成各向异性的处理和各向 异性处理,并使各向异性的处理成为可能。这里将 我们的新发展分作两部分来介绍。第一部分为理 论,第二部分为对速度分析和参数计算的应用。第 一部分理论包括转换点的计算和动校正的分析。     

乾陵地震台DSC-2A型数据采集器雷害故障与处理

通过对乾陵地震台DSC2A型数据采集器雷害故障现象特征、诊断修复过程、故障原因等的分析,提出了数据采集器雷害故障检修的一般步骤方法,并认为,数据采集器内部模拟输入通道转换继电器和通道程控放大电路ICL7650集成运放块易遭雷击损坏,是故障率较高的部件。     

Converted-wave seismology in anisotropic media revisited,Part I: Basic theory

We have developed new basic theories for calculating the conversion point and the travel time of the P-SV converted wave (C-wave) in anisotropic, inhomogeneous media. This enables the use of conventional procedures such as semblance analysis, Dix-type model building and Kirchhoff summation, to implement anisotropic processing, and makes anisotropic processing affordable. Here we present these new developments in two parts: basic theory and application to velocity analysis and parameter estimation. This part deals with the basic theory, including both conversion-point calculation and moveout analysis. Existing equations for calculating the PS-wave (C-wave) conversion point in layered media with vertical transverse isotropy (VTI) are strictly limited to offsets about half the reflector depth (an offset-depth ratio, xlz, of 0.5), and those for calculating the C-wave traveltimes are limited to offsets equal to the reflector depth (x/z=l.0). In contrast, the new equations for calculating the conversion-point extend into offsets about three-times the reflector depth (x/z=3.0), those for calculating the C-wave traveltimes extend into offsets twice the reflector depth (x/z=2.0). With the improved accuracy, the equations can help in C-wave data processing and parameter estimation in anisotropic, inhomogeneous media. This work is funded by the Edinburgh Anisotropy Project (EAP) of the British Geological Survey. First author: Xiangyang Li, Mr. Li is currently a professorial research seismologist (Grade 6) and technical director of the Edinburgh Anisotropy Project in the British Geological Survey. He also holds a honorary professorship in multicomponent seismology at the School of Geosciences, University of Edinburgh. He received his BSc(1982) in Geophysics from Changchun Geological Institute, China, an MSc (1984) in applied geophysics from East China Petroleum Institute (now known as the China University of Petroleum), and a PhD (1992) in seismology from the University of Edinburgh. During 1984–1987, he worked as a lecturer with the East China Petroleum Institute. Since 1991, he has been employed by the British Geological Survey. His research interests include seismic anisotropy and multicomponent seismology.