天津地区井水位年变异常研究

近年来 ,中国地震预报学者开始关注井水位的年变异常及其中短期预测意义问题 ,但井水位年变异常判别采用动态图像的定性对比方法 ,表现出一定的随意性。针对这种现状 ,文中引进概率论与数理统计中的随机过程理论与时间序列分析技术 (盛骤等 ,1989) ,提出了“井水位动态年周期法”与“相对时段速率比较法” ,解决了井水位年变异常的定量识别方法 ,并应用到天津井网 2 1口井的观测数据 (1985年以来 )分析中 ,证明了该方法的可行性与有效性。分析结果表明 ,天津井网中有 7口井在首都圈邻区 4次中强 (MS≥ 5 .8)地震之前 ,表现出 17井次的井水位年变异常 ,且多在震前 1.5～6个月内出现 ,从而再次证明了井水位年变异常具有一定的中短期预测意义     

面波群速度频散计算中滤波的数值实验研究

面波群速度计算中容易出现长周期部分时间域分辨率低的问题，因此，如何提高时间域的分辨率很重要。本文将引入等误差滤波的方法就改进群速度计算中滤波效果进行数值试验。结果表明，采用等误差滤波能明显提高群速度长周期部分的分辨率，对准确地测定长周期部分的群速度有重要意义。     

Discussion on the feature of strong earthquake: Orderly distribution in time, space and intensity before the Western Kunlun Mountain Pass M=8.1 earthquake

Introduction The Western Kunlun Mountain Pass M=8.1 earthquake occurred on November 14, 2001 is the other M=8 earthquake occurred 50 years after Dangxiong, Tibet M=8.0 earthquake in Chinese mainland. The earthquake has caused the attention of the seismologists in the following aspects: 1) The fracture length is more than 400 km, which is far away from the estimated length by the statistic empirical function between the magnitude and the fracture length (WANG, et al, 2002); 2) The aftersh…     

Tensor time domain electromagnetic resistivity measurements at Ngatamariki geothermal field, New Zealand

Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary.     

Identification of soil degradation during earthquake excitations by Bayesian inference

A Bayesian inference approach is introduced to identify soil degradation behaviours at four downhole array sites. The approach of inference is based on a parametric time‐varying infinite impulse response filter model. The approach is shown to be adaptive to the changes of filter parameters and noise amplitudes. Four sites, including the Lotung (Taiwan), Chiba (Japan), Garner Valley (California), and Treasure Island (California) sites with downhole seismic arrays are analysed. Our results show two major types of soil degradation behaviour: the well‐known strain‐dependent softening, and reduction in stiffness that is not instantaneously recoverable. It is also found that both types of soil degradation are more pronounced in sandy soils than in clayey soils. The mechanism for the second type of soil degradation is not yet clear to the authors and suggested to be further studied. Copyright © 2003 John Wiley & Sons, Ltd.     

Predictive instantaneous optimal control of elastic structures during earthquakes

A predictive instantaneous optimal control (PIOC) algorithm is proposed for controlling the seismic responses of elastic structures. This algorithm compensates for the time delay that happens in practical control applications by predicting the structural response over a period that equals the time delay, and by substituting the predicted response in the instantaneous optimal control (IOC) algorithm. The unique feature of this proposed PIOC algorithm is that it is simple and at the same time compensates for the time delay very effectively. Numerical examples of single degree of freedom structures are presented to compare the performance of PIOC and IOC systems for various time delay magnitudes. Results show that a time delay always causes degradation of control efficiency, but PIOC can greatly reduce this degradation compared to IOC. The effects of the structure's natural periods and the choice of control gains on the degradation induced by the time delay are also analyzed. Results show that shorter natural periods and larger control gains are both more sensitive and more serious to the degradation of control efficiency. Finally, a practical application of PIOC is performed on a six‐story moment‐resisting steel frame. It is demonstrated that PIOC contributes significantly to maintain stability in multiple degree of freedom structures, and at the same time PIOC has a satisfactory control performance. Copyright © 2003 John Wiley & Sons, Ltd.     

Predictive instantaneous optimal control of inelastic structures during earthquakes

A new inelastic structural control algorithm is proposed by incorporating the force analogy method (FAM) with the predictive instantaneous optimal control (PIOC) algorithm. While PIOC is very effective in compensating for the time delay for elastic structures, the FAM is highly efficient in performing the inelastic analysis. Unlike conventional inelastic analysis methods of changing stiffness, the FAM analyzes structures by varying the structural displacement field, and therefore the state transition matrix needs to be computed only once. This greatly simplifies the computation and makes inelastic analysis readily applicable to the PIOC algorithm. The proposed algorithm compensates for the time delay that happens in practical control systems by predicting the inelastic structural response over a period that equals the magnitude of the time delay. A one‐story frame with both strain‐hardening and strain‐softening inelastic characteristics is analyzed using this algorithm. Results show that the proposed control algorithm is feasibile for any inelastic structures. While the control efficiency deteriorates with the increase in magnitude of the time delay, the PIOC maintains acceptable performance within a wide range of time delay magnitudes. Finally, a computer model of a six‐story moment‐resisting steel frame is analyzed to show that PIOC has good control results for real inelastic structures. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

时间谱电阻率法中的剩余电磁效应研究

根据频谱激电（SIP）法或复电阻率（CR）法中研究剩余电磁（REM）效应的思想，通过分析时间谱电阻率（TSR）法中场的基本特征，在TSR法中建立了与SIP（或CR）法中参数Φmax/Φ0max相类似的参数－Emax/E0，用来描述了TSR法中的REM效应。通过对一维可极化大地模型的REM效应的理论计算，验证了用Emax/E0表示的REM异常可用来形象地反映地电断面电阻率的高低。     

时频测控技术的发展

目前，在所有的物理量中时间与频率标准的物理实现具有最高的准确度和稳定度，它们的发展不但在计量技术中，而且在几乎整个高科技领域中起着十分重要的作用。这方面的发展一直受到发达国家的高度重视。根据近年来与国外同行的技术交流和了解的情况，对时频测控技术的发展和影响等作了介绍。