全驱动船舶轨迹跟踪初始位置影响分析

船舶轨迹跟踪属于广义上的船舶动力定位,具体来说是船舶在规定的时间内,通过轨迹跟踪系统的控制到达原本设定的位置。以某一全驱动船舶为例,分别对预定轨迹为直线和圆进行船舶轨迹跟踪时域模拟研究,通过分析船舶时域模拟轨迹与预设轨迹的水平位置偏差与艏向角偏差研究轨迹跟踪精度,并分析船舶初始位置对轨迹跟踪的影响。研究表明,船舶初始水平位置偏离设定轨迹起点越大,船舶调整至轨迹的时间越长,但最终能回到预设轨迹上;船舶初始艏向如偏离过大,会导致船舶远离预设轨迹。在实际工程应用中,可利用动力定位将船舶定位至轨迹跟踪起点,调整船舶艏向,再开始轨迹跟踪。     

液舱晃荡载荷计算与强度校核系统研究

随着薄膜型LNG运输船的需求量不断增加,晃荡载荷已成为船舶安全性研究的重要内容之一。本文结合中国船级社规范所推荐的公式,对薄膜型LNG船晃荡水平的载荷进行研究,提出载荷计算方法和流程,在MSC.patran的基础上结合二次开发语言PCL,设计了一套晃荡载荷计算与校核系统。该系统对有限元模型进行前后处理,设计了舱室识别算法来搜索晃荡载荷的作用域,实现薄膜型LNG船晃荡载荷的自动计算与施加,完成屈服强度评估。通过算例测试证明本系统自动计算结果的有效性和准确性,可以为工程设计人员大大节约工作量,大幅度提高工作效率。     

港航地理信息平台研究与实现

针对港航系统各业务部门各自独立的业务系统分散开发、分散应用造成的信息孤岛问题,该文提出了基于3S技术构建的港航地理信息平台设计方案。结合湖州港航管理部门的实际需求,实现了基于GPS的船舶监管、基于RS的航道信息采集以及基于GIS的港航综合信息查询等功能。实践结果表明,该平台可以为港航管理部门提供高效的查询、统计、分析、管理"一站式"业务管理服务,从而验证了本文研究成果的可行性和实用性。     

垂直加速度对SⅡ型海洋重力仪的影响及消除

根据海洋重力测量的实际情况,结合SⅡ型海洋重力仪的结构特点,分析垂直加速度对SⅡ型海洋重力仪的影响,进而采取强阻尼的措施减弱这种影响,对于测量船实时航行状态操纵,提高作业效率具有很重要的作用。     

Study of total column atmospheric aerosol optical depth,ozone and precipitable water content over Bay of Bengal during BOBMEX-99

The spatial and temporal variations in aerosols and precursor gases over oceanic regions have special importance in the estimation of radiative forcing parameters and thereby in the refinement of general circulation models. Extensive observations of the columnar aerosol optical depth (AOD), total column ozone (TCO) and precipitable water content (PWC) have been carried out using the on-line, multi-band solar radiometers onboard ORV Sagar Kanya (Cruise # SK 147B) over Bay of Bengal during 11th–28th August 1999. Aerosol optical and physical properties (optical depth and angstrom parameter) have been estimated at six wavelengths covering from UV to NIR (380–1020 nm) while TCO and PWC have been determined using the UV band around 300 nm and NIR band around 940 nm, respectively. Added, concurrent meteorological and satellite observations during this field phase of BOBMEX-99 have been utilized to investigate spectral-temporal variations of AOD, TCO and PWC in marine environment. The results indicate lower AODs (around 0.4 at characteristic wavelength of 500 nm) and size distributions with abundance of coarse-mode particles as compared to those aerosols of typical land origin. An interesting result that is found in the present study is the significant reduction in AOD at all wavelengths from initial to later part of observation period due to cloud-scavenging and rain-washout effects as well as signature of coastal aerosol loading. The clear-sky daytime diurnal variation of TCO shows gradual increase during post-sunrise hours, broad maximum during afternoon hours and gradual decrease during pre-sunset hours, which is considered to be due to photochemical reactions. The diurnal variation curve of PWC showed maximum (~ 4 cm) during morning hours and gradual decrease (~ 3.5 cm) towards evening hours, which are found to be greater as compared to typical values over land. Another interesting feature observed is that although the PWC values are very high, there was no proportionate or appreciable enhancement in AOD—a feature that can be utilized to infer composition of aerosols over the study region.     

屋盖MR智能隔震系统对升船结构顶部厂房地震鞭梢效应的模糊控制

基于抑制升船结构顶部厂房地震鞭梢效应的目的，本文提出了升船结构顶部厂房屋盖MR智能隔震模糊控制的思想。文中，在建立屋盖智能隔震升船结构计算力学模型的基础上，建立了屋盖MR智能隔震系统对升船结构顶部厂房地震反应模糊控制的设计计算方法。文中并以中国某大坝巨型升船结构为背景，设计了屋盖MR智能隔震系统对升船结构顶部厂房地震反应模糊控制的控制系统。仿真分析和对MR阻尼器的参数研究表明，安装合适的屋盖MR智能隔震系统并采用模糊控制策略能有效地抑制具有不确定参数升船结构顶部厂房地震反应的鞭梢效应，且模糊控制器能保持较好的稳定性能。     

Experimental investigation of blade and propeller loads: Steady turning motion

This paper is the continuation of the work described in [14], dedicated to the presentation of the results of propeller performance in behind-hull during straight ahead motion obtained by a novel experimental set-up for the measurements of single blade loads. In the present case, the study shows and discusses the single blade and propeller loads developed during steady turning conditions, that were simulated by means of free running, self propelled maneuvering tests for a twin screw configuration. Maneuvering conditions are critical for the ship propulsion system, because the performance of the propeller and the side effects related to its functioning (propeller–hull induced pressure and vibrations, noise) are completely different with respect to the design condition in straight ahead motion. Thrust and torque and generation of in-plane loads (force and moments), developed by the blade during the period, evolve differently for the two propellers, due to different propeller–wake interactions. The understanding and the accurate quantification of propeller loads, in these realistic operative scenarios, are pivotal to design low emission and comfortable ships, fulfilling the requirements of safety and continuity of operations at sea. The analysis is carried out revisiting the investigation in [14] for three different speeds (F_N = 0.26, 0.34 and 0.40) and a large set of rudder angles that span moderate and tight maneuvers.     

海南省志愿船综合观测系统设计

志愿船观测是海洋观测系统的重要组成部分,其获取的近海、中远海和远洋航线上的观测资料是对固定观测站点空白海域观测数据资料的重要补充。为提高海洋预警报能力水平,海南省于2016年建设了志愿船综合观测系统。文章重点介绍了该系统的架构设计、主要观测设备及系统功能,同时总结系统优势,并对如何保障志愿船观测系统长期稳定运行提出了争取省级财政专项经费支持,增加志愿船数量和观测要素,建立完善志愿船管理条例和标准体系及加强专业技术人才队伍建设等建议。     

不同设计参数下对转桨水动力性能研究

由于前后桨的相互干扰,对转桨的推力和扭矩呈现非常明显的非定常特点。一些主要的设计参数,如前后桨叶数比、推力比以及桨盘面间距对对转桨的水动力性能皆有一定的影响。分别对它们进行系统的研究有助于减弱对转桨的不利干扰,最大程度地回收周向动能。本文采用CFD方法首先分析了叶数比的影响,推力和扭矩的预报结果与试验值吻合良好,结果显示,叶数比为4∶5的对转桨拥有较好的稳定性。另外,对转桨的效率比等效单桨高8.73%~10.2%左右。最后研究了前后桨不同间距和不同推力比的影响,结果显示,增加前后桨的间距可以有效减小前后桨的不利干扰,但是在一定间距内或者推力比在1附近,对转桨水动力均值变化影响不大。     

基于CFD船舶操纵性预报方法研究

基于CFD技术和重叠网格技术完成了黏性流场中KVLCC2船模的操纵性水动力导数的数值计算。为保证计算的精确性,进行了网格的收敛性分析,给出了合适的网格划分方法;通过数值模拟斜航运动、纯横荡运动和纯艏摇运动计算出的水动力与相应条件下的试验值对比,计算结果与试验值吻合良好,计算出的水动力导数准确度较高。基于MMG分离建模方法建立KVLCC2船模的操纵性数学模型,利用龙格-库塔算法求解微分方程组,对船舶操纵运动进行仿真。回转试验和Z形操舵试验的仿真结果与试验结果对比,其回转直径和轨迹都非常吻合,表明采用的船舶操纵性预报是可行的。