一种新的用于极化SAR图像船只检测的散射相似性测度

本文提出了一种新的用于极化合成孔径雷达（SAR）海上船只目标检测的测度。首先利用散射相似性参数研究船只与海杂波散射机制的差异。基于这些差异,提出了一种新的船只检测测度,该测度能够有效区分船只目标和海杂波。然后提出了利用核密度估计（KDE）方法对该测度进行建模的方法。基于统计模型,实现了自适应恒虚警率（CFAR）的检测方案。本文利用多景C波段RADARSAT-2极化SAR（Pol-SAR）数据上进行实验,系统分析了所提出测度的海杂波拟合性能与船只检测性能,并与两个经典的极化测度进行了比较,实验和比较结果证明了所提的测度的可行性。     

全水深多波束测深系统Seabeam3012在西太平洋马里亚纳海山区地形测量中的应用

中国科学院海洋研究所在开展西太平洋马里亚纳海山区多学科综合科学考察的过程中,利用“科学”轮船载的全水深多波束测深系统Seabeam3012对多个海山进行了地形测量工作。针对作业过程中遇到的恶劣海况导致采集数据质量差、多波束系统易检测错误海底信息、测线布设难度大等问题,提出了基于船体姿态对数据质量影响分析的多波束测线方向优化、基于地形变化并参考浅地层剖面资料的作业参数优化和基于实时采集情况的多波束采集测线布设优化等一系列措施,有效地提高了海山区多波束数据采集质量,并提高了作业效率。获得的高品质地形数据,为多学科协同研究奠定了基础,为ROV等设备的现场作业提供了安全保障。     

日照港30万吨油码头船舶泊稳物理模型试验研究

日照港拟在岚北港区建设30万吨级原油码头,通过实验测定了船舶在风、浪、流作用下对码头结构的作用力、船舶运动量最大值、最大缆绳拉力、船舶对护舷撞击能量和撞击力,为工程结构设计和操船规程的制定提供可靠依据。     

A critical CAE analysis of the bottom shape of a multi stepped air cavity planing hull

One of the most important aspects, in the ACS and multi stepped hull design, is the choice of the geometrical shape of the cavity and the steps. In this article a complete experimental and numerical campaign on a multi stepped ACS has been carried out, varying the velocity and the air flow rate under the hull. The experimental tests have been conducted in an ITTC Towing Tank allowing to validate the numerical simulations obtained by means of a CFD U-RANSe (Unesteady Reynolds Averaged Navier-Stokes equations) code. The CFD setup is described in detail. From this campaign a critical analysis of the Froude number influence on the air cushion shape has been argued. The authors identified four different behaviours, from low to very high Froude numbers. The use of CFD has allowed to observe quantities of difficult evaluation by means of traditional experimental test, as e.g. the frictional component of the resistance, the airflow path lines and the volume of fraction in transversal and longitudinal sections. The results have been discussed.     

Temporal variation of modulated-wave-train geometries and their influence on vertical bending moments of a container ship

A towing experiment was conducted using a modulated wave train to investigate the vertical bending responses of a hydro-structural container ship model. In the experiment, a spatially periodic modulated wave train, as a model of a freak wave in successive high waves mimicking the so-called three sisters, was generated by the recently established higher-order spectral method wave generation (HOSM-WG) method. HOSM-WG enables us to control the location and timing of the maximum crest height in a wave tank. With precise control of the towing carriage, an experiment was conducted in which the timing of the encounters between the ship model and the modulated wave train was accurately determined. The maximum sagging moment (SM) was found to increase in proportion with the encounter wave height. However, because of differences in the relative depth of the fore and aft troughs, the maximum SM is highly variable for a given wave height. The temporal wave-geometry evolution caused the relative trough-depth to vary significantly within a wave period in the vicinity of the maximum crest height. As a result, depending on the encounter timing, the SM varied considerably for a given wave height. The temporal variation of the wave geometry is a robust feature of a modulated wave train and is common between the spatially periodic and temporally periodic modulated wave trains.     

基于无人船的水质监测及控制系统设计

针对执行水质监测任务过程中固定浮标监测站单点监测存在局限性、船载观测人员取样耗时耗力等问题,本文设计了一种搭载多点、分层自动采水取样装置的智能无人船水质监测系统,可实现目标水域的多点、分层连续水质数据测量及取样。该智能无人船具备基于快速随机树(Rapid Random Tree)算法的自主避障和快速路径规划功能,解决了现有无人船技术存在的多障碍自主路径规划难等问题。同时,本设计结合了ARM9控制芯片、M5310无线传输模块,通过可视化的显示界面和远程WEB访问的功能,大大提升了科研人员及时处理特殊情况便捷性。通过实验测试及比对分析,证明本设计具有智能高效、稳定可靠等优点,能够满足职能部门对于水质监测工作的需要。     

碎冰条件下单点系泊船舶动态响应特性研究

为了研究不同单点系泊位置对极地系泊船舶在来冰角度改变时动态响应的影响,运用离散元方法(DEM),计算了船舶在60%密集度下,冰速为1.0 m/s、冰厚为1 m时不同角度的船冰阻力,结合系泊分析软件二次开发功能,计算分析系泊船舶在不同来冰角度和不同系泊位置下受上述冰情影响下的响应。通过对模拟结果与试验结果的对比,认为离散元方法(DEM)的数值模拟结果与试验结果吻合较好;单点系泊位置为距船头L/4时,系泊船舶能以最快速、最稳定的方式对来冰方向的变化做出响应。     

凸包插值算法的改进与实现

研究了凸包插值算法在n维欧拉空间构造Delaunay三角网的应用,提出了其三角剖分不惟一的重大缺陷,采用了限制区域生长法解决了这一缺陷。     

Econometric analysis of the ship demolition market

The topic of ship recycling has obtained considerable attention during the last two decades for a variety of reasons with the likelihood of the adoption of a new international convention under the auspices of the International Maritime Organization (IMO). This study applies econometric modeling to a unique data set to provide insight into the dynamics of the ship recycling market. The data set contains information on 51,112 ships over 100 gt and includes 748,621 events over a period of 29 years. The analysis confirms a negative relationship of earnings and a positive relationship of scrap prices for all locations while Bangladesh seems to be more sensitive to changes in earnings than the other locations and more likely demolishes larger and older vessels. The results for flag and ownership vary across scrapping locations with Malta and Cyprus indicating potential importance from a registry perspective. The overall safety profile of a vessel seems to be less important towards the probability of a ship being scrapped. Possible implementation of the convention at EU level will mostly likely affect Turkey while non-ratification of one of the major flags will most likely affect China or Bangladesh.