冲绳海槽中部岩心沉积物中浮岩的物理性质和地球化学特征差异及其对岩浆活动的指示

为进一步了解冲绳海槽浮岩的物理性质和地球化学特征差异,对冲绳海槽中部岩心沉积物S9中的浮岩进行了微观结构和地球化学组成分析。结果显示,冲绳海槽中部存在白色、灰白色及棕色3种浮岩,其中灰白色浮岩又可以根据构造特征分为气孔构造和流动构造浮岩两个亚类。浮岩的地球化学组成表明白色、灰白色及棕色浮岩都是由玄武质岩浆经过充分的分离结晶作用形成的流纹质或流纹英安质火山岩。玄武质岩浆在演化的过程中发生了斜长石、角闪石、辉石、Fe-Ti氧化物、磷灰石等矿物的结晶分离。结合有孔虫14C年龄,认为浮岩是冲绳海槽中部距今13.1 ka左右的长英质火山活动的产物。演化程度相对较低的棕色浮岩具有比白色浮岩高的TiO2, Al2O3, Fe2O3, MgO, CaO含量,且棕色浮岩具有相对低的稀土总量和轻稀土总量。根据浮岩的物理性质及地球化学组成差异推测,岩浆的黏度和压力是影响浮岩构造特征的主要因素。黏度大、连续减压的岩浆易于形成具有流动构造和密集气孔的浮岩,黏度小、阶段性减压的岩浆易于形成气孔大而疏松的浮岩。     

耐压柱壳参数化设计与灵敏度分析

为提高耐压柱壳设计效率,设计了耐压柱壳参数化分析流程。研究了有限元分析所涉及的材料属性、载荷施加、边界条件设置等内容,确定了采用弧长法分析耐压柱壳稳定性。利用Python语言对于ABAQUS软件进行了二次开发,利用Isight软件实现了ABAQUS的集成,实现了耐压柱壳有限元分析模型的网格自动划分、自动分析计算等。选择样本点进行参数化分析,利用响应面模型对于样本点进行了拟合,得到了具有较高拟合精度、满足工程需要的近似模型,进行了设计变量的灵敏度分析。研究结果表明:参数化分析流程可实现耐压柱壳的自动分析、近似模型及灵敏度分析,可降低耐压柱壳分析难度,均可提高耐压柱壳设计效率。     

培育密度和投饵量对长牡蛎壳黑选育品系幼虫生长存活及附着变态的影响

为探究长牡蛎(Crassostrea gigas)壳黑选育品系规模化繁育适宜的培育密度和投饵量,本研究以长牡蛎野生群体幼虫为对照组,分析了不同培育密度(3、7和15个/mL)和不同初始投饵量(0.4、0.8和1.6×10~3cells·ind^-1·d^-1)对长牡蛎壳黑选育品系幼虫生长、存活及附着的影响。研究显示,培育密度和投饵量对长牡蛎幼虫的生长速率、存活率和附着率有显著交互作用(P<0.05)。在培育密度3和7个/mL实验组,长牡蛎幼虫生长速率随投饵量增加而显著增大(P<0.05),并在培育密度7个/mL、投饵量1.6×10~3cells·ind^-1·d^-1实验组达到最大值。而在培育密度15个/mL实验组,投饵量增加对长牡蛎幼虫的生长速率无显著影响(P> 0.05)。且在培育密度15个/mL、投饵量1.6×10~3cells·ind^-1·d^-1实验组长牡蛎壳黑品系幼虫存活率和附着率最低。但在培育密度15个/mL实验组长牡蛎壳黑选育品系幼虫的壳高始终高于野生群体幼虫。且除投饵量0.4×10~3cells·ind^-1·d^-1实验组外,长牡蛎壳黑选育品系幼虫生长速率、存活率和附着率均高于野生群体幼虫。研究结果表明,长牡蛎壳黑选育品系幼虫最适培育条件为培育密度7个/mL、投饵量1.6×10~3cells·ind^-1·d^-1,增加投饵量可促进长牡蛎幼虫生长,但过高的培育密度会与投饵量产生拮抗作用,抑制幼虫生长,不利于幼虫存活和附着。与长牡蛎野生群体相比,壳黑选育品系幼虫能适应更高的培育密度环境,在饵料充足的条件下,其幼虫的生长、存活及附着性状均优于野生群体。     

载人潜水器圆柱形耐压壳体的优化设计研究

采用分枝定界法和序列二次规划方法,对载人潜水器圆柱形耐压壳体的重量最小化进行了研究.设计变量是壳板的厚度、肋骨的型号、间距和数量,讨论了下潜深度、材料几何参数对重量以及其它特征量的影响.算例计算表明,下潜深度越大,屈服极限越高的材料重量减轻越明显.对于大深度而言,选用高屈服极限材料,可以使得材料能够充分利用.文中还对结构重量占排水量比例随深度变化的情况进行了研究.     

五种双壳贝类贝壳微观结构观察与成分分析

利用扫描电镜技术、X-射线粉末衍射技术和弱酸去钙法,对菲律宾蛤仔、文蛤、厚壳贻贝、泥蚶、缢蛏5种习见海洋经济贝类贝壳的断面微观结构、物相组成、有机基质和蛋白质含量等进行了观察和分析。电镜观察结果显示, 5种贝壳的微观结构主要包含棱柱层和珍珠层;棱柱层晶体结构有斜棱柱层、球棱柱层、棱柱层、均质层和交错板状层5种类型,其中缢蛏只有斜棱柱层,而泥蚶除球棱柱层外,其他4种晶体类型均存在,此复杂结构可能与其贝壳强度大有关;珍珠层晶体结构有珍珠层和肌棱柱层2种类型,其中厚壳贻贝的珍珠层呈典型的“砖-泥”结构,具有明显的层状结构,其余4种贝壳珍珠层均由不规则块状结构组成。X-射线衍射结果显示,菲律宾蛤仔、文蛤、缢蛏和泥蚶4种贝壳都属于文石质壳体,无机相几乎由文石组成,而厚壳贻贝属于混合质壳体,无机相由文石和方解石组成;贝壳化学成分分析显示,5种贝壳有机质含量均为3%左右,而总蛋白含量占有机质的2.98%～7.21%,其中可溶性蛋白是不可溶蛋白含量的5.55～20.31倍。上述结果为贝壳形成机理的研究积累了基础资料。     

Cryopreservation of Veliger Larvae of Trumpet Shell,Charonia sauliae: an Essential Preparation to Artificial Propagation

Trumpet shell, Charonia sauliae, is an endangered and valuable species, but its artificial propagation protocol has not been successfully established. To estimate the possibility of cryopreservation for larvae of C. sauliae, which is a potential preparation for its artificial reproduction and further research, in this study a protocol for the cryopreservation of veliger larvae of trumpet shell was optimized. Through a two-step cryopreservation procedure, four kinds of cryoprotectants (ethylene glycol, 1, 2-propanediol,dimethyl sulfoxide and glycerol) were employed at three concentrations (1.0, 1.5 and 2.0 molL-1) respectively and survival rates of larvae were determined after a storage of 1h. The larvae frozen with these four cryoprotectants after 1h storage were cultured, and then survival rates were determined at 24, 72 and 120h after thawing. Dimethyl sulfoxide at a concentration of 1.5 molL-1 showed the best protective effect in all experiments (p<0.05). And survival rates of larvae frozen with dimethyl sulfoxide were determined after 1,7 and 15 d of storage. The survival rates of larvae frozen with 1.5 molL-1 dimethyl sulfoxide after 1h, 1d, 7 d and 15 d of storage were 80.77% ±7.51%, 80.34% ±11.28%, 83.10% ±9.14% and 77.23%±6.22% respectively. No significant differences in survival rates of larvae frozen with dimethyl sulfoxide were observed after various storage periods (p>0.05).     

深海潜器耐压圆柱壳结构计算和校核方法研究

文中比较了中美两国潜器规范中各特征量的计算方法和校核准则,分析了异同点,并给出数值算例。针对潜器特性,对目前我国潜器规范中可能需要修改的地方进行了初步分析。     

Biometric,microstructural, and high-resolution trace element studies in Crassostrea gigas of Cantabria (Bay of Biscay,Spain): Anthropogenic and seasonal influences

Living Crassostrea gigas oysters of different ages and sizes were collected in three estuaries of Cantabria (Bay of Biscay, Spain): San Vicente de la Barquera Estuary, Santander Bay, and Marismas de Santoña Estuary. The main objective was to determine different shell responses to variable environmental parameters. A shell morphological study, based on three biometric indices, indicates that oysters of Santander Bay have two significant shell anomalies: abnormal thickening of the right valve and loss of vital cavity volume. These shell abnormalities are related with the presence in these waters of the chemical tributyltin. In the other two estuaries, the oysters show no detectable anomalies. Four shell microstructures have been distinguished: Regular Simple Prismatic, Regular Foliated, cone-Complex Cross Foliated, and Chalk. In Santander Bay oysters, the Chalk forms a “root-type” framework, whereas in the other two estuaries it forms a more compact microstructure. It is proposed that exposure to tributyltin has produced this modification. High-spatial-resolution geochemical transects have been carried out on the Regular Foliated microstructure in the umbo region in order to evaluate the distribution of Mg, Sr, and Na. The elements analysed exhibit clear cyclic variations in San Vicente de la Barquera Estuary and Marismas de Santoña Estuary oysters, related with seasonal periods, and characterised by broad maxima during months in which the waters are warmer and have higher salinity. These patterns are buffered in Santander Bay oysters. Our results demonstrate that biometric, microstructural, and high-resolution trace element studies in oyster shells can provide information about contaminants and seasonal variations in the estuarine environment.     

粘性土微结构形态要素及其定量信息处理技术

本文论述了粘性土微结构的形态要素及其层次关系，提出了11种结构参数并难予了相应的图像定义；以分形理论为基础确定了7项非线性结构要素的定量描述方法及其分维指标，并对其定量信息获取手段——粘性土微结构图象处理系统（MIPS）作了简要介绍。     

Nd:YAG纳秒激光诱导硅表面微结构的演化

利用Nd:YAG纳秒激光(波长为532和355 nm)对单晶硅在真空中进行了累积脉冲辐照,研究了表面微结构的演化情况.在激光辐照的初始阶段,532和355 nm激光脉冲均在硅表面诱导出了波纹结构,后者辐照硅表面后形成了近似同心但稍显混乱的环形波纹结构.随着脉冲数的增加,波纹结构逐渐演化为一种类似珠形的凹凸结构,最后形成准规则排列的微米量级锥形结构,该微结构的生长依赖于表面张力波和结构自组织.分析发现,形成的交叉环形结构主要是在355 nm激光辐照硅的过程中,表面张力波导致波纹结构部分叠加的结果.