导水裂隙带高度预测途径探讨

导水裂隙带高度是设计防水煤（岩）柱尺寸的主要技术参数，是煤矿防治水工作的重要内容。详细论述了其研究现状及发展趋势，并提出了履岩体地质环境，履岩体力学环境和数值模拟技术三位一体的综合预测评价方法。     

福建沙县地区早白垩世火山岩成因及构造环境分析

本文着重阐述了沙县地区早白垩世火山岩地球化学特征，论证了中性与酸性火山岩的成因及物质来源，认为二者为不同源岩浆演化的产物，其岩浆物质来源于壳幔混源区，为省内双峰式火两端员岩石间成因关系的分析研究提供了新的例征。     

后方交会法配合可编程计算器在测量放线中的应用

介绍了后方交会及支导线的计算方法，探讨了Casio Fx4500计算器程序的编制，说明后方交会法配合可编程计算程序在道路施工及其它测量放线过程中不仅克服了其路基不平等许多不便之处，而且大大提高了测量放线的速度和精度，值得推广应用。     

Influence of the zone of weakness on dip angle and shear heating of subducted slabs

We study the importance of the zones of weakness and the pattern of downgoing flow in steady-state models of subducting lithosphere, which interacts mechanically and thermally with the ambient mantle. The non-linear system of governing equations consists of (i) the momentum equation in stream function formulation and (ii) the steady-state heat transfer equation including conduction and advection of heat and dissipation. A finite element method has been applied to this system. We consider the viscosity to be a non-linear function of both the temperature and the stream function. In steady-state two-dimensional (2D) flow, the stream function isolines follow material trajectories. They are used to follow the top of the subducting slab, which because of its possible increase in water content, is assumed to have a lower viscosity. The zone of weakness has been thus obtained in the self-consistent fashion since the stream function as well as the temperature are the output from our modeling and no a priori assumptions about the shape of the bending lithosphere are taken into account. It was shown that several orders decrease of viscosity in the zone of weakness is required to obtain the dip angle of about 45°. If the decrease of viscosity is not sufficient enough, the subducted slab either sinks almost vertically or does not exhibit a plate-like behavior. We have also demonstrated that shear heating can unrealistically increase at the zone of weakness for fast subductions if decrease of viscosity is underestimated.     

Fundamental study on the response characteristics of drivers during an earthquake based on driving simulator experiments

After the 1995 Kobe earthquake, the expressway structures in Japan were retrofitted and they will not now be seriously damaged under a certain level of strong earthquake motion. However, the stability of a moving vehicle has not been investigated yet. It has been reported that drivers feel seismically induced vibrations, especially in the transverse direction of vehicles. Owing to this phenomenon, drivers have some difficulty in controlling the vehicles during strong shaking. For further safety promotion of the expressway networks, it is important to understand the drivers' reactions to seismic motion. The present authors have performed a series of seismic response analyses of a moving vehicle to investigate its response characteristics based on numerical simulation. However, the responses of the driver were not considered in the simulation process. In order to investigate the drivers' reactions during an earthquake, a series of virtual tests were conducted using a driving simulator. This driving simulator has six servomotor‐powered electric actuators that control its motions. Several types of tests were carried out for different examinees to investigate drivers' responses while controlling the simulator under seismic motion. The results of this study showed that a larger response time lag to strong shaking and over turning of the steering wheel may shift the vehicle into the next lane. According to this finding, trafficaccidents could possibly occur under strong ground shaking in the case of heavy traffic. Copyright © 2004 John Wiley & Sons, Ltd.     

六四式军用梁在侧向架梁中的应用

六四式军用梁应用于遂川江特大桥40mT梁侧向架梁中,笔者详细地介绍了架梁设备的主要结构,以及架梁施工技术与操作方法,并对军用梁架梁设备进行系统验算,架梁设备达到安全要求。并进行了经济技术分析,应用该架梁方案,大大降低了施工成本。     

适用于大旋转角的三维基准转换的一种简便模型

基于大角度的空间直角坐标转换，提出了以方向余弦为参数、适用于任何角度旋转的空间直角坐标转换的简明计算方法。     

利用AMTIS数据反演植被和土壤温度

遥感陆面温度 (LST)是目前遥感界面临的重要课题 ,组分温度反演则为LST反演的主攻目标。如果混合像元组分间的温度及发射率存在明显差别 ,就可以从多角度热辐射亮度变化中分离出组分温度的信息。在热辐射矩阵模型的基础上 ,讨论了确定可反演参数和反演组分温度的方法 ,并以AMTIS多角度热红外图像为数据源 ,在进行几何和大气纠正后 ,尝试利用矩阵反演方法分解混合像元中的植被和土壤温度。误差分析表明土壤温度反演结果较好 ,但植被温度的反演精度不高     

灌溉后的黄土剪切特征变化

在中国甘肃省的黑方台阶地上从上世纪60年代开始出现人类定居和开垦活动,并自1968年发展为灌溉农业。随着灌溉的进行地面已出现沉陷和滑坡。地表沉陷是由灌溉水的充填引起黄土结构崩塌造成的。然而崩塌和湿润化对剪切特征的影响目前还不清楚。为了研究湿化后的黄土剪切特征的变化,进行了对马兰黄土未经扰动和重塑土样的直接剪切盒测试。结果显示未扰动土样的粘合力和内摩擦角在湿润化后都下降了,而所观察到的重塑土的弹度参数只有少许变化。未扰动土的不饱合粘合力,据认为其受胶结物质的影响,在饱合后消失了。经灌溉的土的不饱合强度参数与未灌溉土相比表现出差异,它们可能受土壤水分的强烈影响。     

Geochemical characteristics of the metapelites from the Xingxingxia group in the Eastern Segment of the Central Tianshan: Implications for the provenance and paleoweathering

Clastic sedimentary rocks record a number of in-formation about the compositions and paleoweathering conditions of the source areas, and the tectonic setting of the depositional basin[1―6]. The traditionallypetrological study commonly utilizes the major com-ponents (Quartz, Feldspar and Lithics) of the silici-clastic sedimentary rocks to investigate the source rock composition and tectonic setting[7]. However, thepetrological method is somewhat limited, because many of the mafic components f…