The seismic shear of ductile cantilever wall systems in multistorey structures

The distribution of seismic base shear demand among ductile flexural cantilever walls, comprising the lateral load resisting system of a multistorey building, is studied. It is shown that the base shear force demand depends on the sequence of hinge formation at the wall bases, and this in turn depends on the relative wall lengths. Hence, the routine elastic approach in which the shear forces are allocated per relative flexural rigidity or (when some consideration is given to plastic hinge formation) to moment capacity at the wall base, may appreciably underestimate the shear force demand on the walls, particularly the shorter (usually the more flexible) ones. A simple procedure yielding the results of ‘cyclic’ pushover analysis is proposed to predict the peak seismic wall forces for a given total base shear when plastification is confined to the wall base. The effects of plastic hinges developing at higher floors on (1) shear distribution among the walls and (2) the in‐plane floor forces are also considered. Two numerical examples are presented to demonstrate the main points made. Copyright © 2004 John Wiley & Sons, Ltd.     

Preliminary study on the occurrence of geothermal systems in the tectonic compressional regions: an example from the Derman geothermal field in the Biga Peninsula, Turkey

There are numerous hot springs with temperatures ranging from 30 to 100 °C in Biga peninsula and they occur throughout the peninsula. The result of this study shows that the region is under a tectonic compressional regime. The investigation of the faults and fractures in the region indicates that the region has been affected first by N–S and then E–W compression since the Middle Miocene. Opening fractures and antithetic and synthetic faults due to the compressional movements provide paths for the deep circulation of water. In addition, the tectonic movements, granitic intrusion and volcanic activity have also played important roles as heat sources for the geothermal systems.     

Data driven bivariate landslide susceptibility assessment using geographical information systems: a method and application to Asarsuyu catchment, Turkey

In the last decades, landslide hazard assessment has attracted many researchers' attention. A number of parameters are suggested to be responsible to quantitatively explain the mechanism of landslides; many of these parameters are very important and factual. However, some data types and models are site-specific and could not be applied to different locations. Furthermore, the data stored in continuous parameter maps are divided into a number of classes arbitrarily, depending on the vision of the expert. Basically, this division controls the result of bivariate analysis. Besides, the responsible portion of the parameter map controlling the mechanism is also weighted arbitrarily. Based on these two facts, the class boundaries put a prejudice on the produced susceptibility/hazard maps, which result in dependence on the knowledge of the user rather than being dependent on the data and the fact itself. The aim of this study is to refine the previously defined methods in a more data-dependent trend. To achieve this goal, two new concepts: seed cells and percentile maps are introduced. Seed cells are the zones that are considered to represent the best undisturbed morphological decision rules (conditions before landslide occurs) and would be achieved by adding a buffer zone to the crown and flank areas of the landslide. To quantitatively classify the input parameter maps, the data distributions of seed cells in the parameter maps are divided into a number of classes on the basis of their distribution's percentile break-points upon which the parameter maps are directly dependent on the seed cell distributions, hence to the data itself.     

关注我国“工业测量”事业的发展

尝试给出工业测量的定义、范畴、目标的分类和多样性,简要叙述工业测量手段的多样性,列举待研制和待改进的工业测量集成系统的名称以及所依托的几何传感器的类别。     

A Local Example of Land‐Use Change: Southern Illinois—1807, 1938, and 1993*

This article provides an analysis of a wetland site in southern Illinois from presettlement to the present. The study area is part of the Cache River‐Cypress Creek Wetland, which has international importance, as recognized by the Ramsar Convention on Wetlands. Land‐cover data for 1807, 1938, and 1993 were created and analyzed with a geographic information system (GIS). Land‐use change by topographic setting (uplands, transitional, and bottomlands) and soil productivity was quantified and studied. Interviews with local experts informed this analysis. Results illustrate the complexity of environmental change and its driving forces. First, notable forest and swamp acreage was converted to cropland between 1807 and 1938 and, to a lesser degree, from 1938 to 1993. Second, there were land‐use variations by topographic region. Between 1807 and 1938, the largest transformation occurred in the uplands, with substantial acreage converted from forest to cropland. Between 1938 and 1993, however, agriculture decreased in the upland areas as hilly areas reverted to forest cover. At the same time, agriculture expanded in the bottomlands as this land was drained for farming. Third, there are interesting patterns within these categories of land‐use change, as soil productivity is an indicator of what lands were taken out of cropland and converted back to grassland and forest.     

The gravity field and GGOS

The gravity field of the earth is a natural element of the Global Geodetic Observing System (GGOS). Gravity field quantities are like spatial geodetic observations of potential very high accuracy, with measurements, currently at part-per-billion (ppb) accuracy, but gravity field quantities are also unique as they can be globally represented by harmonic functions (long-wavelength geopotential model primarily from satellite gravity field missions), or based on point sampling (airborne and in situ absolute and superconducting gravimetry). From a GGOS global perspective, one of the main challenges is to ensure the consistency of the global and regional geopotential and geoid models, and the temporal changes of the gravity field at large spatial scales. The International Gravity Field Service, an umbrella “level-2” IAG service (incorporating the International Gravity Bureau, International Geoid Service, International Center for Earth Tides, International Center for Global Earth models, and other future new services for, e.g., digital terrain models), would be a natural key element contributing to GGOS. Major parts of the work of the services would, however, remain complementary to the GGOS contributions, which focus on the long-wavelength components of the geopotential and its temporal variations, the consistent procedures for regional data processing in a unified vertical datum and Terrestrial Reference Frame, and the ensuring validations of long-wavelength gravity field data products.     

Pressure sensitivity of olivine slip systems: first-principle calculations of generalised stacking faults

We have used a first-principle approach based on the calculation of generalised stacking faults (GSF) to study the influence of pressure on the mechanical properties of forsterite. Six cases corresponding to [100] glide over (010), (021) and (001), and [001] glide over (100), (010) and (110) have been considered. The relaxed energy barriers associated with plastic shear have been calculated by constraining the Si atoms to move perpendicular to the fault plane and allowing Mg and O atoms to move in every direction. These conditions, which preserve dilations as a relaxation process, introduce Si–O tetrahedral tilting as an additional relaxation mechanism. Relaxed GSF show little plastic anisotropy of [100] glide over different planes and confirms that [001] glide is intrinsically easier than [100] glide. The GSF are affected by the application of a 10 GPa confining pressure with a different response for each slip system that cannot be explained by sole elastic effect. In particular, [100](010) is found to harden significantly under pressure compared to [001](010). Our results give the first theoretical framework to understand the pressure-induced change of dominant slip systems observed by Couvy et al. (in Eur J Mineral 16(6):877–889, 2004) and P. Raterron et al. (in GRL, submitted). It appears necessary to account for the influence of pressure on the mechanical properties of silicates in the context of the deep Earth.     

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.     

Numerical simulation of percussive drilling

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.     

Integration of aquifer geology,groundwater flow and arsenic distribution in deltaic aquifers – A unifying concept

Groundwater arsenic (As) presents a public health risk of great magnitude in densely populated Asian delta regions, most acutely in the Bengal Basin (West Bengal, India and Bangladesh). Research has focused on the sources, mobilisation, and heterogeneity of groundwater As, but a consistent explanation of As distribution from local to basin scale remains elusive. We show for the Bengal Aquifer System that the numerous, discontinuous silt‐clay layers together with surface topography impose a hierarchical pattern of groundwater flow, which constrains As penetration into the aquifer and controls its redistribution towards discharge zones, where it is re‐sequestered to solid phases. This is particularly so for the discrete periods of As release to groundwater in the shallow subsurface associated with sea level high‐stand conditions of Quaternary inter‐glacial periods. We propose a hypothesis concerning groundwater flow ( S ilt‐clay layers I mpose H ierarchical groundwater flow patterns constraining A rsenic progression [SIHA]), which links consensus views on the As source and history of sedimentation in the basin to the variety of spatial and depth distributions of groundwater As reported in the literature. SIHA reconciles apparent inconsistencies between independent, in some cases contrasting, field observations. We infer that lithological and topographic controls on groundwater flow, inherent to SIHA, apply more generally to deltaic aquifers elsewhere. The analysis suggests that groundwater As may persist in the aquifers of Asian deltas over thousands of years, but in certain regions, particularly at deeper levels, As will not exceed low background concentrations unless groundwater flow systems are short‐circuited by excessive pumping.