Climatic changes and alluvial-sedimentation settings in southeastern Transbaikalia in the Middle-Late Holocene (by the example of the Ilya floodplain)

Climatic changes in southeastern Transbaikalia in the Middle and Late Holocene and their influence on alluvial sedimentation environments are reconstructed from the results of study of the Ilya floodplain sediments (Alkhanai National Park). At the beginning of the Subboreal period, the regional climate became more arid, which led to a significant increase in steppe species communities in the landscapes. Intense climate aridization also took place at the beginning and at the end of the Subatlantic period of the Holocene. The alluvial-sedimentation rate increased during the weakening of aridization and decreased during cooling and the intensification of aridization. The obtained regional data are compared with data on the adjacent areas and the global climatic changes in the Northern Hemisphere.     

有限元法模拟开挖引起的基坑水平位移和邻近建筑物沉降

以徐州某采用水泥土墙支护的基坑为例,采用有限元数值模拟的方法,对基坑开挖引起的水平位移量和邻近建筑物沉降量进行了计算,并与实际监测值进行了对比分析,得到了一些关于如何控制基坑水平位移和减少基坑周边建筑沉降的结论。     

The Taconite Inlet Lakes Project: a systems approach to paleoclimatic reconstruction

A comprehensive study of meteorological, hydrological, limnological and sedimentological conditions in the watersheds of density-stratified (meromictic) lakes around Taconite Inlet, Northern Ellesmere Island, N.W.T., Canada was carried out from 1990–1992. Lakes C1 and C2 contain seawater trapped by isostatic uplift as the former embayments became isolated from the sea. These lakes, and Lake C3, contain varved sediments which provide an annually resolvable paleoclimatic record. By studing the major systems influencing sedimentation in one of these lakes (Lake C2) a better understanding of the climatic controls on varve formation, and hence on the paleoclimatic signal in the varved sediment record, was obtained. The varves of Lake C2 provide a proxy record of summer temperature for the region.This is the first in a series of papers published in this issue on the Taconite Inlet Lakes Project. These papers were collected by Dr R. S. Bradley.     

Ostracode carbonate δ18O- and δ13C-signature of hydrological and climatic changes affecting Lake Neuchâtel,Switzerland, since the latest Pleistocene

Floating and grounded peat plateaus were studied in fens in the Yukon Territory (Canada). The peat deposit may be over 4 m thick and consists of a lower bed of aquatic peat overlain by humic fen peat, mesic fen peat and woody peat. Permafrost in the grounded peat plateaus is older than the 1200 year old White River Ash, whereas permafrost in the floating peat plateau is younger.Peat accumulation rates since 1200 years B.P. were greater in the fens (85–100 cm) than on the surface of the peat plateaus (25–55 cm). Where the peat plateau is free-floating, it will persist until the climate changes, causing the icy core to thaw. Where the peat plateau is frozen to the mineral substrate, it slowly drowns since the fen peat accumulates faster than the woody peat. This drowning results in degradation of the landform independently of the climate. Only degradation of floating peat plateaus can be used to identify climatic changes.This publication is the first paper in a series of papers presented at the session on Past Climatic Change and the Development of Peatlands at the ASLO and SWS Meetings in Edmonton, Canada, May 30–June 3, 1993. Dr. P. Kuhry and Dr S. C. Zoltai are serving as Guest Editors.     

Brønsted reactions on oxide mineral surfaces and the temperature-dependence of their dissolution rates

The pH-dependence of oxide dissolution rates is controlled by Brønsted acid-base reactions at the mineral surface. These reactions are rapid but depend explicitly on temperature, as do the subsequent slow rates of bond hydrolysis. The net result is that dissolution rates vary in a complicated fashion with temperature and solution pH. The enthalpy changes of acid-base reactions on oxide materials are sufficiently similar, however, that general statements can be made about their contribution. The enthalpy changes from proton adsorption to a hydroxyl functional group (SOH), or to a deprotonated functional group (SO ^–), are generally exothermic. The enthalpy changes become increasingly endothermic, however, as charge accumulates on the mineral surface and the charged species interact electrostatically. The result is that mineral dissolution rates are least sensitive to temperature, as measured with an Arrhenius-like rate law, at pH conditions near the Point of Zero Net Proton Charge.     

Channel overflows of the Pōhue Bay flow,Mauna Loa,Hawai'i: examples of the contrast between surface and interior lava

A number of overflows from a large lava channel and tube system on the southwest rift zone of Mauna Loa were studied. Initial overflows were very low viscosity gas-rich phoehoe evidenced by flow-unit aspect ratios and vesicle sizes and contents. Calculated volumetric flow-rates in the channel range between 80 and 890 m³/s, and those of the overflows between 35 and 110 m³/s. After traveling tens to hundreds of meters the tops of these sheet-like overflows were disrupted into a surface composed of clinker and phoehoe fragments. After these 'a' overflows came to rest, lava from the interiors was able to break out on to the surface as phoehoe. The surface structure of a lava flow records the interaction between the differential shear rate (usually correlated with the volumetric flow-rate) and viscosity-induced resistance to flow. However, the interior of a flow, being better insulated, may react differently or record a later set of emplacement conditions. Clefts of toothpaste lava occurring within fields of clinker on proximal-type 'a' flows also record different shear rates during different times of flow emplacement. The interplay between viscosity and shear rate determines the final morphological lava type, and although no specific portion of lava ever makes a transition from 'a' back to phoehoe, parts of a flow can appear to do so.     

Sector collapse,sedimentation and clast population evolution at an active island-arc volcano: Stromboli,Italy

Sciara del Fuoco is the subaerial part of a partially filled sector-collapse scar that extends to 700 m below sea level on Stromboli volcano. The collapse occurred <5000 years ago, involved 1.81 km³ of rock and is the latest of a series of major collapses on the north-west flank of Stromboli. A north-east trending arc-axial fault system channels magmas into the volcano and has caused tilting and/or downthrow to the north-west. The slope of the partial cone constructed between the lateral walls of the collapse scar acts as a channelway to the sea for most eruptive products. From 700 m below sea level and extending to >2200 m and >10 km from the shore to the NNW, a fan-shaped mounded feature comprises debris avalanche deposits (>4 km³) from two or more sector collapses. Volcaniclastic density currents originating from Sciara del Fuoco follow the topographic margin of the debris avalanche deposits, although overbank currents and other unconfined currents widely cover the mounded feature with turbidites. Historical (recorded) eruptive activity in Sciara del Fuoco is considerably less than that which occurred earlier, and much of the partial fill may have formed from eruptions soon after the sector collapse. It is possible that a mass of eruptive products similar to that in the collapse scar is dispersed as volcanogenic sediment in deep water of the Tyrhennian basin. Evidence that the early post-collapse eruptive discharge was greater than the apparent recent flux (2kg/s) counters suggestions that a substantial part of Stromboli's growth has been endogenous. The partial fill of Sciaria del Fuoco is dominated by lava and spatter layers, rather than by the scoria and ash layers classically regarded as main constituents of Strombolian (cinder) cones. Much of the volcanic slope beneath the vents is steeper than the angle of repose of loose tephra, which is therefore rapidly transported to the sea. Delicate pyroclasts that record the magmatic explosivity are selectively destroyed and diluted during sedimentary transport, mainly in avalanches and by shoreline wave reworking, and thus the submarine deposits do not record well the extent and diversity of explosive activity and associated clast-forming processes. Considerable amounts of dense (non-vesicular) fine sand and silt grains are produced by breakage and rounding of fragments of lava and agglutinate. The submarine extension of the collapse scar, and the continuing topographic depression to >2200 m below sea level, are zones of considerable by-passing of fine sand and silt, which are transported in turbidity currents. Evidently, volcanogenic sediments dispersed around island volcanoes by density currents are unlikely to record well the true spectrum and relative importance of clast-forming processes that occurred during an eruption. Marine sedimentary evidence of magmatic explosivity is particularly susceptible to partial or complete obliteration, unless there is a high rate of discharge of pyroclastic material into the sea.     

Airborne gamma-ray spectrometry to quantify chemical erosion processes

Airborne gamma-ray spectrometry data (uranium, potassium and thorium contents) reveal geochemical heterogeneities within the monolithological Hyrôme watershed (ca. 150 km²) in the Armorican massif (western France). Our observations and computations provide important constraints on the spatial distribution and the associated magnitudes of chemical erosion processes at the scale of a small watershed. Two distinct, partially preserved, weathering profiles exhibit a strong correlation between regolith evolution and airborne-derived K/Th ratios, suggesting that the variability is linked to supergene processes. Using both airborne data and laboratory measurements on rock samples, the total net export of potassium has been estimated at 422 ± 50 kg/m² and the chemical weathering rate of potassium at 17 ± 2 kg/km²/a.     

Seismic potential of Southern Italy

To improve estimates of the long-term average seismic potential of the slowly straining South Central Mediterranean plate boundary zone, we integrate constraints on tectonic style and deformation rates from geodetic and geologic data with the traditional constraints from seismicity catalogs. We express seismic potential (long-term average earthquake recurrence rates as a function of magnitude) in the form of truncated Gutenberg–Richter distributions for seven seismotectonic source zones. Seismic coupling seems to be large or even complete in most zones. An exception is the southern Tyrrhenian thrust zone, where most of the African–European convergence is accommodated. Here aseismic deformation is estimated to range from at least 25% along the western part to almost 100% aseismic slip around the Aeolian Islands. Even so, seismic potential of this zone has previously been significantly underestimated, due to the low levels of recorded past seismicity. By contrast, the series of 19 M6–7 earthquakes that hit Calabria in the 18th and 19th century released tectonic strain rates accumulated over time spans up to several times the catalog duration, and seismic potential is revised downward. The southern Tyrrhenian thrust zone and the extensional Calabrian faults, as well as the northeastern Sicilian transtensional zone between them (which includes the Messina Straits, where a destructive M7 event occurred in 1908), all have a similar seismic potential with minimum recurrence times of M ≥ 6.5 of 150–220 years. This potential is lower than that of the Southern Apennines (M ≥ 6.5 recurring every 60 to 140 years), but higher than that of southeastern Sicily (minimum M ≥ 6.5 recurrence times of 400 years). The high seismicity levels recorded in southeastern Sicily indicate some clustering and are most compatible with a tectonic scenario where the Ionian deforms internally, and motions at the Calabrian Trench are small. The estimated seismic potential for the Calabrian Trench and Central and Western Sicily are the lowest (minimum M ≥ 6.5 recurrence times of 550–800 years). Most zones are probably capable of generating earthquakes up to magnitudes 7–7.5, with the exception of Central and Western Sicily where maximum events sizes most likely do not exceed 7.