陆内碰撞体制流体作用及成矿作用研究的意义和现状

陆内碰撞作用和流体作用都是８０年代以来的研究前沿，它们的研究必然会大大促进成矿作用研究的发展，也是跟踪和超越世界地球科学先进水平的重要途径。中国拥有最多最复杂的陆内碰撞带，为中国学者开发有关研究并取得高水平成果提供了得天独厚的条件。对陆内碰撞、流体作用和成矿作用研究现状的分析表明，三者之间研究的相互结合是薄弱环节，限制了有关问题的深入，但为我国学者开发该方向的研究，取得领先于国家水平的成果，提供了     

Geomorphological study on a clastic accretionary prism: The Nankai Trough

Abstract The Nankai Trough, off southwest Japan, is one of the best sites for the study of geomorphic characteristics of a clastic accretionary prism. A recent multibeam survey over the central and eastern parts of the Nankai accretionary prism has revealed a large variation of the topography along the trough axis. Analysis of the bathymetric data suggests the existence of prism deformational features of different scales, such as depressions, embayment structures and cusps. These structures are the results of slope instability caused by basement relief of subducted oceanic plate. Unstable slopes recover by new accretion and development of a low angle thrust. Small-scale deformation due to the subduction of a small isolated seamount is then adjusted to the regional trend. By contrast, a 30 km indentation of the wedge observed in the eastern part of the Nankai Trough, the Tenryu Cusp, has seemed to retain its geometry. The subducted Philippine Sea plate has deformed greatly near the eastern end of the Nankai Trough, because of the collision between the Izu-Ogasawara (Bonin) arc and central Japan. Therefore, the indentation may be the result of the continuous subduction of a basement high, such as the Zenisu Ridge, which has been formed under north-south compression due to the arc-arc collision.     

The Collision Manifold of the Collinear One-Bumper Two-Body Problem

We present a special model which is a caricature of the collinear three-body problem. Near triple-collision behavior for the model is governed by the collision manifold. We study the bifurcations of the dynamics on this manifold as we vary the ratio of masses. Both analytic and numerical results are presented.This revised version was published online in October 2005 with corrections to the Cover Date.     

Carbonate deposits on submerged seamounts in the northwestern Pacific Ocean

Abstract   The lithology of shallow-water carbonates collected from 19 sites on 16 seamounts in six areas of the northwestern Pacific Ocean using the Deep-sea Boring Machine System are described. The areas include the Amami Plateau, Daito Ridge, Oki-Daito Ridge, Urdaneta Plateau, Kyushu-Palau Ridge and Ogasawara Plateau. Chronological constraint is provided by calcareous nannofossil biostratigraphy, planktonic foraminiferal biostratigraphy, larger foraminiferal biostratigraphy and strontium (Sr) isotope stratigraphy. Large amounts of shallow-water carbonates accumulated on the seamounts during the Oligocene, a relatively cool period, whereas limited carbonate deposits formed during the Early Miocene, a relatively warm period. This might indicate that deposition of shallow-water carbonates on seamounts in the northwestern Pacific Ocean was not necessarily controlled by climatic conditions, but was related to volcanism and tectonics that served as foundations for reef/carbonate-platform formation. Remarkable differences in biotic composition exist between Cretaceous and Cenozoic shallow-water carbonates. Late Cretaceous shallow-water carbonates are distinguished by the occurrence of rudists, solenoporacean algae and microencrusters. Middle Eocene to Early Oligocene shallow-water carbonates are dominated by Halimeda or nummulitid and discocyclinid larger foraminifers. Scleractinian corals became common from the Oligocene onward. Nongeniculate coralline algae and larger foraminifers were common to abundant throughout the Eocene to the Pleistocene. The replacement of major carbonate producers in the shallow-water carbonate factory during post-Cretaceous time is in accordance with previous studies and is considered to reflect a shift in seawater chemistry.     

On Continent-Continent Point-Collision and Ultrahigh-Pressure Metamorphism

Up to now it is known that almost all ultrahigh-pressure (UHP) metamorphism of non-impact origin occurred in continent-continent collisional orogenic belt, as has been evidenced by many outcrops in the eastern hemisphere. UHP metamorphic rocks are represented by coesite- and diamond-bearing eclogites and eclogite facies metamorphic rocks formed at 650-800℃ and 2.6-3.5 GPa, and most of the protoliths of UHP rocks are volcanic-sedimentary sequences of continental crust. From these it may be deduced that deep subduction of continental crust may have occurred. However, UHP rocks are exposed on the surface or occur near the surface now, which implies that they have been exhumed from great depths. The mechanism of deep subduction of continental crust and subsequent exhumation has been a hot topic of the research on continental dynamics, but there are divergent views. The focus of the dispute is how deep continental crust is subducted so that UHP rocks can be formed and what mechanism causes it to be subducte     

甘肃北山造山带类型及基本特征

北山造山带经历多期次、多阶段的板块裂解－俯冲－碰撞－拼合的复杂地质演化历程，具多旋回复合造山的特色。通过对造山带构造单元的建立、古板块重建、原型盆地恢复、造山带结构、构造特征及造山机制和模式的研究，确定北山造山带类型为陆－增生弧碰撞造山带。     

中国西北大陆碰撞带的深部特征及其动力学意义

以中国大陆西北地区地震层析成像的结果为基础，通过分析大陆块体内部岩石层和软流层的深部形态，提出西部造山带与相邻块体之间几种可能的碰撞类型：天山与塔里木之间存在地块的嵌入拼合、俯冲、岩石层拆离下沉以及层间插入等多种构造样式；青藏高原与北部地质单元之间存在十分清晰的深部边界，反映出上地幔物质向北扩展的痕迹；推测青藏高原的岩石层在向北运动的过程中由于受到塔里木刚性块体的阻滞发生弯曲甚至折断，但是祁连山以北较浅的软流层相当于一个开放边界，使高原的上地幔物质得以进一步向北迁移.大陆碰撞不仅造成中国西部造山带岩石层结构的变动，而且导致软流层中一部分熔融的岩浆体沿着碰撞边界上涌到岩石层底部，它们对青藏高原以及西部造山带的形成演化起到重要的作用.     

中太平洋海山多金属结壳的成矿特征

根据我国大洋多金属结壳的调查资料并结合其他相关的研究结果，对中太平洋海山区多金属结壳的类型，产状，成分，结构，分布等成矿特征进行了初步的研究，结果表明，中太平洋海山区富钴结壳广泛发育，但成矿特征较大地受地形，水溶，基岩类型等成矿环境因素的影响与制约。     

Tectonics of Precambrian basement of the Tarim craton

The Altyn Tagh Mountain is the main area where the Precambrian basements of Tarim craton are exposed. There are two ophiolitic belts in Altyn Tagh: one belt is exposed in the northern margin of Altyn Tagh whose formation age is about (829±60) Ma, the other is situated along the southern margin of Altyn Tagh and has a formation age of about (1449±270) Ma. This paper proposes a simple tectonic model for the Precambrian basement of Tarim craton established from ophiolites in Altyn Tagh area. The south Tarim block had amalgamated with Qaidam block during about 1400-1500 Ma along the present Altyn fault, while the south Tarim-Qaidam united block was still separated from the north Tarim block by an ocean. The united block of south Tarim and Qaidam collided with north Tarim block along the zone of high positive anomaly of central Tarim, Hongliugou and Lapeiquan in about 800 Ma. So since the Sinian (beginning at 800 Ma) there has been an integrated basement for Tarim craton.