Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.     

Urban effects of Chennai on sea breeze induced convection and precipitation

Doppler radar derived wind speed and direction profiles showed a well developed sea breeze circulation over the Chennai, India region on 28 June, 2003. Rainfall totals in excess of 100 mm resulted from convection along the sea breeze front. Inland propagation of the sea breeze front was observed in radar reflectivity imagery. High-resolution MM5 simulations were used to investigate the influence of Chennai urban land use on sea breeze initiated convection and precipitation. A comparison of observed and simulated 10m wind speed and direction over Chennai showed that the model was able to simulate the timing and strength of the sea breeze. Urban effects are shown to increase the near surface air temperature over Chennai by 3.0K during the early morning hours. The larger surface temperature gradient along the coast due to urban effects increased onshore flow by 4.0m s⁻¹. Model sensitivity study revealed that precipitation totals were enhanced by 25mm over a large region 150 km west of Chennai due to urban effects. Deficiency in model physics related to night-time forecasts are addressed.     

华北地台东部石炭系—二叠系优质煤储层形成分布控制因素

优质煤储层在此指厚度大、分布广、储集物性好的煤层。沉积相对优质煤储层的形成和分布有重要控制作用。通过浅海和泻湖淤积填平发育起来的潮坪环境和三角洲环境是最有利的优质煤储层形成环境,煤储层厚度大、分布广。沉积环境对煤储层中的灰分含量和镜质组含量有重要影响,而灰分含量和镜质组含量又直接影响煤储层的储集物性。灰分充填了煤储层中的孔隙,其含量越高,储集物性越差;镜质组有利于割理的形成,其含量越高,储集物性越好。由于在灰分含量、煤岩显微组分等方面的差异,潮坪环境沉积的煤储层的储集物性优于三角洲的煤储层,下三角洲平原沉积的煤储层优于上三角洲平原沉积的煤储层。海平面变化对优质煤储层的形成和分布也有重要控制作用。高位体系煤储层富集,单层厚度大,横向分布相当稳定,尤其是高位体系域晚期,是形成优质煤储层最有利的层位。而水进体系域煤储层稀少,单层厚度小,横向分布不稳定,不利于优质煤储层形成。     

Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.     

On CO<Subscript>2</Subscript> fluid flow and heat transfer behavior in the subsurface,following leakage from a geologic storage reservoir

Geologic storage of CO₂ is expected to produce plumes of large areal extent, and some leakage may occur along fractures, fault zones, or improperly plugged pre-existing wellbores. A review of physical and chemical processes accompanying leakage suggests a potential for self-enhancement. The numerical simulations presented here confirm this expectation, but reveal self-limiting features as well. It seems unlikely that CO₂ leakage could trigger a high-energy run-away discharge, a so-called “pneumatic eruption,” but present understanding is insufficient to rule out this possibility. The most promising avenue for increasing understanding of CO₂ leakage behavior is the study of natural analogues.     

Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

陆面过程中稳定水同位素逐日变化的数学模拟——引入稳定同位素效应的CLM实例分析

将稳定同位素效应引入CLM(Community Land Model),并对巴西马瑙斯站在平衡年的稳定水同位素的逐日变化进行模拟和分析.结果表明: 降水、水汽和地表径流中δ18O存在明显的季节变化,并与相应的水量存在显著的负相关关系,但凝结物中δ18O与地面凝结量存在显著的正相关关系,蒸发水汽中δ18O与蒸发量之间无显著的相关关系.受土壤贮水削峰功能的影响,表层土壤和根区水中δ18O的季节变化全无.植被层蒸发水汽中稳定同位素的丰度与大气的干湿程度存在密切联系: 当降水量少时,大气干燥,植被层的蒸发较少,植被蒸发中δ18O较高;当降水量较大时,空气湿润,植被层的蒸发量较大,蒸发中δ18O则较低.植被蒸腾中δ18O的变化与源区水体中δ18O的变化保持一致,尤其是与根区水中的δ18O.由于地下径流直接源自根区水的补充,因此,地下径流中δ18O等于根区水中的δ18O.模拟结果还显示,降水MWL (大气水线)的梯度项和常数项均比全球平均MWL略偏小.尽管主要来自降水的贡献,但地表径流和植被层水体的MWLs与降水MWL存在较大的差异,这一方面与两类水体在蒸发过程中的稳定同位素的富集作用有关,另一方面与CLM模拟的水量有关.大气水汽线与降水的MWL的梯度值相近,说明大气水汽与降水近似处于稳定同位素平衡状态.另外,模拟的地面的凝结线与植被层的凝结线均与全球大气水线相近,且具有非常高相关程度,说明CLM的模拟是合理的.     

斜向波对直立式防波堤堤头作用的试验研究

直立式防波堤堤头在斜向波浪作用下波浪力的计算在现行的技术规范中尚属空白。通过物理模型试验给出了堤头结构设计所需的波压分布图，指出了波浪入射方向和地形对堤头所受波浪力的贡献有时可以超过波高和波周期，根据现行规范按波浪正向入射计算堤头所受的波浪力偏于安全。     

Control strategies for the Clam Wave Energy Device

A promising wave energy device being currently investigated is the ‘clam’. The clam extracts energy by pumping air through a specially designed (Wells) turbine. Although operation of the Wells turbine does not require a rectified air flow, some additional control will be necessary to optimize the phase of the clam motion for good efficiencies. An examination of the equation of motion in the time domain suggests the possibility of phase control by mechanical, power take-off, or pneumatic latching. Latching can be shown to increase the efficiency of the device in the longer wavelengths of the wave spectrum, i.e. those of high incident wave power. Equivalently latching could be used to keep the device efficiency high while reducing its size, possibly resulting in cheaper power extraction.