内蒙古苏里格庙地区晚古生代层序地层学研究

通过岩心观察 ,结合测井曲线和地震反射资料分析 ,并根据层序地层和层序界面的识别标志 ,建立了苏里格庙地区的层序地层格架 ,并将上古生界划分为 3个二级层序 (超层序组 )和 15个三级层序 ,其中本溪组和太原组的层序具二元体系域结构 ,即由海进体系域和高位体系域组成 ;山西组、石盒子组和石千峰组的层序具三元体系域结构 ,包括低位体系域、湖进体系域和高位体系域。剖析了陆表海浅陷沉积、陆表海碳酸盐岩与碎屑岩混合沉积及近岸内陆河流—三角洲—湖泊沉积超层序组 (或层序组 )中层序的发育特征 ,论述了层序的演化过程。     

Sea-level changes and hydrothermal sedimentary mineralization of large-superlarge ore deposits among Sinian to Triassic in South China

Among the Sinian to Triassic strata in South China, the stratiform, quasi-stratiform and lenticular metallic deposits in association with hydrothermal sedimentation mainly occur in the four periods: (1) the Sinian Datangpo interglacial period, (2) the early period of Early Cambrian, (3) the late period of Middle Devonian to early period of Late Devonian,and (4) the late period of Early Permian. The four mineralization periods all happened around the maximum flooding period in the third-order seal-level cycle during the ascending stage in the first-order sea-level cycle. The deep seawater layer, starved and non-compensatory basin, low sedimentary rate, and low energy and anoxic environment during the maximum flooding period are very suitable for the formation and preservation of large to superlarge hydrothermal sedimentary deposits. The maximum flooding period also coincided with the intensified regional tectonism, extensive deep magmatism and hydrothermal sedimentation, which provide, for the formation of large to superlarge hydrothermal sedimentary deposits through the rapid accumulation of hydrothermal sediments, the needed dynamics, ore-forming materials and favorable passway for hydrothermal fluids to enter the basin.     

采用Creator生成三维地形

介绍了Creator地形转换的四种算法，讨论了在Creator中生成地形的过程，并以福建省闽清地区水口店为研究区域，建立直观性的、真实性的三维地形。     

GIS支持下珠江三角洲城镇建筑覆盖变化遥感监测分析

从珠江三角洲区域总体出发，探讨大范围城镇建筑覆盖变化的遥感监测方法。分析了城镇建筑覆盖变化专题信息提取方法概况，比较了最大似然法、上下文分类法、人工神经网络三种分类方法的优缺点。借助GIS技术的术持，在计算机自动分类的基础上利用专家知识改进了分类结果。根据遥感监测结果，对1988—1998年间珠江三角洲城镇建筑覆盖变化特征进行了分析。     

GPS滑坡监测专用的Gquicks软件

介绍了Guicks软件的数学模型,Gquicks软件的结构和功能.经实测检测检验,当基准点与监测点之间距离在3km内,用20分钟GPS观测值,Gquicks软件解算的水平精度可达±2-3mm,垂直精度可达±4-6mm.Gquicks软件不仅适用于GPS滑坡变形监测,也可应用于其他变形监测领域.     

从卫星遥感全色图像中自动提取城市目标

提出了一种从卫星遥感全色图像中自动提取城市目标的方法。在总结城市目标的卫星遥感全色图像特性的基础上 ,设计了一种层次提取的方法。首先在低分辨率图像中提取城市目标的候选区域 ;接着在候选区域内利用城市目标一些更复杂的特性在高分辨率图像中证实城市目标。为了获得城市目标的边界 ,提出了一种基于边缘点密度的算法 ,并将算法应用去提取SPOT图像中的城市目标 ,取得了较好的试验结果     

利用卫星测高空间技术建立数字化海洋

论述了卫星测高空间技术的主要特征、科学意义及其在军事和经济建设领域的重要价值，阐明了国内外测高卫星系统的发展现状及利用卫星测高空间技术建立数字化海洋所取得的成果，分析卫星测高目前的研究方向，提出了发展我国卫星测高空间技术以及利用该技术建立数字化海洋的一些建议。     

Facies Clustering in Turbidite Successions: Case Study from Andaman Flysch Group, Andaman Islands, India

Bed thickness data of two turbidite sections viz., Corbyn's Cove section, South Andaman and Kalipur section, North Andaman those belong to Oligocene Andaman Flysch Group, a forearc submarine fan system, were assessed for facies clustering employing Hurst statistics. Both the sections show Hurst phenomenon and reveal clustering in terms of thick and thin beds. Forcing behind event (bed) depositions in either of the studied sections was assessed statistically and inferred to be non-random and with cyclicities of irregular physical length. The inferred paleogeography through Hurst criteria though worked well for distal fan setting i.e., basin floor sheet sandstones of Corbyn's Cove section, its unequivocal application in proximal fan deposits remains to be tested. The mismatch in paleogeographic interpretation between Hurst test result (lobe-interlobe) and field observation (channel-levee) for the inner fan deposit is explained through differential facies stacking between fans grow in sea-level lowstand and highstand. Lower bed amalgamation, poor sand to mud ratio and subordinately present thick event deposits may be the result of active growth of Andaman Flysch fan in sea level highstand and expressed in lower Hurst K value for inner fan channel-levee association (Kalipur section) compared to many of the channel-levee deposits of lowstand fan systems observed world over.     

Are catch-up reefs an artefact of coring?

Drill cores through modern coral reefs commonly show a time lag in reef initiation followed by a phase of rapid accretion to sea level from submerged foundations – the so-called ‘catch-up response’. But because of the difficulty of drilling in these environments, core distribution is usually restricted to accessible areas that may not fully represent reef history, especially if the reef initiated in patches or developed with a prograde or retrograde geometry. As a consequence, core data have the potential to give a misleading impression of reef development, particularly with respect to the timing of initiation and response to sea-level rise. Here, we use computer models to simulate keep-up reef development and, from them, quantify variations in the timing of reef initiation and accretion rate using mock cores taken through the completed simulations. The results demonstrate that cores consistently underestimate the timing of reef initiation and overestimate the reef accretion rate so that, statistically, a core through a keep-up reef will most likely produce a catch-up pattern – an initiation lag followed by a phase of rapid accretion to sea level. This implies that catch-up signatures may be an artefact of coring and that keep-up reefs are significantly more common than previous core studies claim.     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.