昭通示范区黄金坝气田五峰—龙马溪组页岩气储层地质特征

昭通国家级页岩气示范区黄金坝气田是继礁石坝和长宁—威远之后中国又一个在页岩气勘探、开发领域实现重大突破的地区,为了系统地展示黄金坝气田页岩气资源富集的储层条件,为未来的勘探工作提供参考,以五峰—龙马溪组页岩气储层为研究对象,从区域地质条件、储层岩石学、物性和地球化学4个方面对该页岩气储层进行了综合研究。结果表明稳定的区域构造和良好的顶底板条件是黄金坝地区页岩气资源富集的关键,良好的保存条件使储层维持了较高的压力(压力系数1);较高的孔隙度(平均4%)和TOC含量(目的层2%)提供了良好的储集空间,使储层具有较高的含气量(1.35~3.48 cm3/g,平均2.50 cm3/g);天然气地球化学数据表明,区内天然气主要成分为CH4(97%),其次还含有少量的C2H6、C3H8和CO2;天然气同位素数据表明烃类C同位素组成发生了倒转,表明储层具有良好的封闭性。但储层孔隙系统较为复杂,且非均质性极强,从而导致渗透率较低,在储层改造施工过程中应予以充分考虑。总体上,黄金坝气田具有较好的开发前景,生产测试表明,区内直井压裂产量为0.5×104~3.5×104m3/d/井,水平井压裂产量可达12×104~40×104m3/d/井。     

基于同步风场的机载SAR海浪参数反演方法

针对机载合成孔径雷达(SAR)对海探测特点,采用多入射角法从SAR数据本身得到与海浪参数反演区域时空匹配的同步海面风速和风向,并结合线性变换关系,计算得到海浪初猜谱对应的仿真SAR图像谱,将仿真SAR图像谱和观测SAR图像谱输入代价函数中进行迭代运算,通过非线性方程的解算得到最适海浪谱;采用交叉谱法去除海浪传播180°方向模糊,最终得到海浪参数。论文提出的基于同步风场的机载SAR海浪参数反演方法,充分利用了机载SAR海洋环境探测的优势,解决了传统SAR海浪参数反演中初猜谱构造依赖外部风场的问题,机载同步飞行试验的海浪参数反演结果与浮标观测值的有效波高、波向的均方根误差分别为0.23 m和13.23°,验证了该方法的有效性,可为机载SAR海浪参数反演业务化提供支持。     

Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier?Stokes Equations (RANSE) for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a body-fixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models (TCMs), the RNG model with wall functions and curvature correction and the Shear Stress Transport (SST) model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×106 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.     

Diagnosis of earth-fill dams by synthesised approach of sounding and surface wave method

The spatial distribution of the strength inside the earth-fill is identified by the sounding tests. In this research, the Swedish weight sounding (SWS) is employed, and the spatial high-density test is performed to identify the spatial correlation structure. Furthermore, the synthesised approach of the SWS and surface wave method, which is one of the geophysical method, is proposed to compensate the shortage of each approach. Consequently, the correlation structure of an earth-fill could be identified accurately, and the high resolution of the spatial distribution could be visualised based on the survey results.     

浮托安装进船过程中护舷碰撞力实测研究

浮托安装法广泛应用于大型组块海上安装。导管架平台上部组块浮托安装进船过程中,风、浪、流引起的浮托驳船横向运动造成浮托驳船与导管架桩腿的碰撞,碰撞力可能会对导管架结构造成损伤。陆丰7-2上部组块浮托安装中,为了监测碰撞力大小,设计了碰撞力海上监测系统。通过在导管架外侧四个桩腿上安装光纤光栅应变传感器对碰撞过程中导管架桩腿进行应力监测,进而计算碰撞力。对碰撞过程,载荷作用位置、方向进行简化,并对载荷大小及垂向作用位置对计算的影响进行了研究。结构分析模型简化后,测点von-Mises应力与碰撞力大小成正比,对导管架整体结构建模计算并取局部结构计算比例系数,结合应力实测数据计算出进船过程中驳船对导管架桩腿碰撞力。     

Evaluation of Effective Depth of PVD Improvement in Soft Clay Deposit: A Field Case Study

This article presents a case history of determination of effective depth of prefabricated vertical drains (PVDs) under embankment loading on a very soft clay deposit in central China, near Jiujiang, Jiangxi Province. The height of the embankment was 5.3 m and construction time was about one year. The PVDs were installed to a depth of 8.5 m at a spacing of 1.5 m in a triangular pattern. Field observations and the finite element method (FEM) were employed to analyze the performance of the soft deposit during embankment construction. The influential depth of the embankment loading was evaluated based on settlement, excess pore pressure, and stress increase in subsoil, both from the observed data and FEM analysis. The effective PVD depth was determined in the following ways: (1) the depth of 5% subsoil settlement of surface settlement; (2) vertical stress increase in subsoil of 25% in-situ stress; and (3) consolidation time/PVD depth relation by FEM. Based on the analysis, the effective depth of PVDs was determined to be between 10 and 12.8 m for this field case.     

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.     

Magnetic measurements in electrical prospecting by resistivity methods

The electrical resistivity and induced polarization (IP) methods are widely used in geological mapping, prospecting and exploration of mineral deposits, engineering geology, hydrogeology, archaeology, and geotechnical and environmental applications. Historically, these methods have formed the basis of the electrical prospecting technique. In these methods, a DC or low-frequency AC electrical current is introduced into the earth through a grounded transmitter line. The measured quantity is the electric field. However, if the earth’s resistivity or chargeability changes horizontally, this change gives rise to an anomalous magnetic field, which is studied by the magnetometric resistivity (MMR) and magnetic induced polarization (MIP) methods, respectively. Along with advantages, some shortcomings are inherent in the MMR and MIP techniques. Apparently, the main drawback of these methods is that the magnetic fields of both the transmitter line wire and ground electrodes on the surface are several orders of magnitude greater than the anomalous magnetic field response. This introduces a significant “noise” to magnetic-resistivity data. We investigate the potential of using a circular electric dipole (CED) in magnetometric resistivity techniques. It has been found that the application of a CED, instead of a conventional transmitter line, dramatically enhances the signal-to-noise ratio.     

辽宁赛马碱性岩体异性石化学成分特征及其蚀变组合对碱性岩浆-热液演化的指示意义

辽宁赛马碱性岩体早年因产铀矿而闻名,该岩体主要由响岩、霞石正长岩和异霞正长岩组成,其中铀、锆和稀土等元素矿化主要集中于异霞正长岩岩浆阶段。异性石是异霞正长岩中特征的锆-稀土矿物,主要分为两期,晚期异性石表现出更加富集Nb、REE等高场强元素的特点。早期异性石经历了一系列的热液蚀变,根据蚀变强弱程度,蚀变矿物组合可分为:(1)异性石+钠锆石+霓石±钠沸石;(2)异性石+钠锆石+锆石+钠沸石±霓石;(3)异性石假晶,假晶主要由残余异性石+钠锆石+锆石+钠沸石+霓石+钾长石+铈硅磷灰石组成。相比于岩浆锆石,蚀变组合中次生锆石具有富Ca、Al、Fe的特点,与异性石本身化学成分和流体性质密切相关。通过对异性石及其蚀变组合的精细矿物学研究,我们得知假晶的形成可能是异性石"溶解-再沉淀"的结果,致使假晶形成的流体至少包括:(1)占主导的富Na(±K)、Al、F的自交代流体;(2)少量晚期富Ca流体。假晶中次生锆石和铈硅磷灰石的结晶说明了Zr和REE等高场强元素的热液活动性,自交代碱性流体和富Ca流体在此过程中起到"搬运"和"提纯"的作用,这对认识碱性岩稀有、稀土成矿机制具有重要的指示意义。     

断裂应力特征及其转折控油气规律研究——以南堡凹陷为例

为了分析断裂对油气宏观分布规律的控制作用,寻找有勘探潜力的油气富集带,文中以地质力学理论为指导,对南堡凹陷断裂组合应力特征、断裂转折及成因进行解析,并结合砂体分布和古今构造应力场分布特征,对南堡凹陷东营组油气分布规律和有利勘探区带做了研究。结果表明:断裂转折部位对油气分布有着控制作用,东营组已探明的油气主要在帚状断裂系、入字形断裂系、交织式断裂系转折轴部高曲率附近呈环带状分布;断裂转折凹面一侧控油性明显,从宏观上来看,油气具有沿沉积相带由细到粗的构造脊高点以及弧形断裂转折凹面一侧的选择性运移的特征,断裂转折轴部高曲率高孔、高渗域与高孔、高渗砂体沉积相带的有利对置决定了油气的主流向;综合研究指出,南堡凹陷北堡构造带是今后优势勘探的首要区带,其次是南堡构造带和南堡4号蛤坨构造带南部。