构造应力环境对浅成岩体成矿系统的制约:从安庆月山岩体冷却过程动力学计算模拟结果分析

为探讨构造应力环境对浅成岩体成矿系统的制约,以安庆地区的月山岩体及其所形成的安庆铜矿床为例,在传统地质调查研究的基础上,通过假设不同的力学边界条件进行岩体冷却过程动力学的计算模拟实验研究。计算结果显示,在没有构造应力作用时,在岩体的接触带上不可能形成有利成矿定位的局部汇流扩容空间,挤压和拉伸作用都能够在岩体接触带形成局部汇流扩容空间,但二者的空间分布规律有着极大的差别,只有拉伸构造应力作用下的动力学计算模拟实验能在已发现矿体部位形成汇流扩容空间,表明构造应力环境对成矿定位的汇流空间的制约以及拉伸构造应力作用对月山岩体成矿的重要贡献。在拉伸构造应力和无构造应力作用时,接触带上的流体压力都是随着变形的进程而趋降低的,只有在挤压构造应力作用下,流体压力才会有一个超压的过程,流体超压是形成斑岩型矿床的重要机制。可见挤压环境才是一种有利于斑岩型矿床成矿的构造环境,铜陵-安庆地区缺乏与矽卡岩矿床相对应的斑岩型矿床主要原因之一是成矿时处于一种拉伸的构造应力作用环境。     

腾格里沙漠南部格状沙丘的形态演变及移动特征

沙丘的形态变化与移动蕴含区域风沙环境和地貌演化的关键信息,是风沙地貌研究的重要内容。以腾格里沙漠南缘的长格状和方格状沙丘为研究对象,利用风况资料和Google Earth卫星影像,监测2009—2020年两种格状沙丘的形态变化并分析其移动特征。结果表明：(1)腾格里沙漠西南缘和东南缘的主风向均为西北风,长格状沙丘分布区的次风向为东南风,方格状沙丘分布区次风向为东风和东南风,都属于低风能环境、中变率风况。西南部风能环境大于东南部,研究区近10年风动力呈衰减趋势。(2)格状沙丘的主副梁长度和间距在增加,其中,长格状沙丘高度增加,方格状沙丘高度在降低。沙丘主梁向东偏移,副梁向南偏移,形态整体保持稳定。(3)长格状沙丘平均移动速率为1.57～1.71 m·a^-1,方格状沙丘平均移动速率为1.63～2.01 m·a^-1,沙丘平均移动方向与合成输沙方向基本一致,沙丘的体积是造成移动速率差异的主因。     

黄河银川平原段河岸摆动速率变化及其影响因素(英文)

It is important to examine the lateral shift rate variation of river banks in different periods. One of the challenges in this regard is how to obtain the shift rate of river banks, as gauging stations are deficient for the study of river reaches. The present study selected the Yinchuan Plain reach of the Yellow River with a length of 196 km as a case study, and searched each point of intersection of 153 cross-sections(interval between two adjacent cross-sections was 1.3 km) and river banks in 1975, 1990, 2010 and 2011, which were plotted according to remote sensing images in those years. Then the shift rates for the points of intersection during 1975–1990, 1990–2010 and 2010–2011 were calculated, as well as the average shift rates for different sections and different periods. The results show that the left bank of the river reach shifts mostly to the right, with the average shift rates being 36.5 m/a, 27.8 m/a and 61.5 m/a in the three periods, respectively. Contemporarily, the right bank shifts mostly to the right in the first period, while it shifts to the left in the second and third periods, with the average shift rates being 31.7 m/a, 23.1 m/a and 50.8 m/a in the three periods, respectively. The average shift rates for the left and right banks during the period 1975–2011 are 22.3 m/a and 14.8 m/a, respectively. The bank shift rates for sections A, B and C are different. The shift rate ratio of the left bank in the three sections is 1:7.6:4.6 for shift to the left and 1:1.7:3.8 for shift to the right, while that of the right bank is 1:1.8:1.2 for shift to the left and 1:5.6:17.7 for shift to the right during the period 1975–2011. Obviously, the average shift rate is the least in section A, while it is maximum in section B for shift to the left and in section C for shift to the right. The temporal variation of the shift rate is influenced by human activities, while the spatial variation is controlled by the local difference in bank materials.     

Medium and small embankment dams on permafrost: A discussion of current concepts

This article discusses the current concepts of dam design and construction in permafrost regions. It is demonstrated that embankment dams often change their state from frozen to thawed and back during the operation period. It is shown that these transitions are not always attributable to observed climate warming. Where geotechnical, hydrogeological, and permafrost conditions are complicated, proper performance of embankment dams can only be provided by adhering to a selected thermal design for, as an example, a frozen state.     

Applications of wavelet analysis in differential propagation phase shift data de-noising

Using numerical simulation data of the forward differential propagation shift （ΦDP） of polarimetric radar,the principle and performing steps of noise reduction by wavelet analysis are introduced in detail.Profiting from the multiscale analysis,various types of noises can be identified according to their characteristics in different scales,and suppressed in different resolutions by a penalty threshold strategy through which a fixed threshold value is applied,a default threshold strategy through which the threshold value is determined by the noise intensity,or a ΦDP penalty threshold strategy through which a special value is designed for ΦDP de-noising.Then,a hard-or soft-threshold function,depending on the de-noising purpose,is selected to reconstruct the signal.Combining the three noise suppression strategies and the two signal reconstruction functions,and without loss of generality,two schemes are presented to verify the de-noising effect by dbN wavelets：（1） the penalty threshold strategy with the soft threshold function scheme （PSS）; （2） the ΦDP penalty threshold strategy with the soft threshold function scheme （PPSS）.Furthermore,the wavelet de-noising is compared with the mean,median,Kalman,and finite impulse response （FIR） methods with simulation data and two actual cases.The results suggest that both of the two schemes perform well,especially when ΦDP data are simultaneously polluted by various scales and types of noises.A slight difference is that the PSS method can retain more detail,and the PPSS can smooth the signal more successfully.     

Petrology,geochemistry and geochronology of the magmatic suite from the Jianzha Complex,central China: Petrogenesis and geodynamic implications

The intermediate–mafic–ultramafic rocks in the Jianzha Complex (JZC) at the northern margin of the West Qinling Orogenic Belt have been interpreted to be a part of an ophiolite suite. In this study, we present new geochronological, petrological, geochemical and Sr–Nd–Hf isotopic data and provide a different interpretation. The JZC is composed of dunite, wehrlite, olivine clinopyroxenite, olivine gabbro, gabbro, and pyroxene diorite. The suite shows characteristics of Alaskan-type complexes, including (1) the low CaO concentrations in olivine; (2) evidence of crystal accumulation; (3) high calcic composition of clinopyroxene; and (4) negative correlation between FeO^tot and Cr₂O₃ of spinels. Hornblende and phlogopite are ubiquitous in the wehrlites, but minor orthopyroxene is also present. Hornblende and biotite are abundant late crystallized phases in the gabbros and diorites. The two pyroxene-bearing diorite samples from JZC yield zircon U–Pb ages of 245.7 ± 1.3 Ma and 241.8 ± 1.3 Ma. The mafic and ultramafic rocks display slightly enriched LREE patterns. The wehrlites display moderate to weak negative Eu anomalies (0.74–0.94), whereas the olivine gabbros and gabbros have pronounced positive Eu anomalies. Diorites show slight LREE enrichment, with (La/Yb)_N ratios ranging from 4.42 to 7.79, and moderate to weak negative Eu anomalies (Eu/Eu¹ = 0.64–0.86). The mafic and ultramafic rocks from this suite are characterized by negative Nb–Ta–Zr anomalies as well as positive Pb anomalies. Diorites show pronounced negative Ba, Nb–Ta and Ti spikes, and typical Th–U, K and Pb peaks. Combined with petrographic observations and chemical variations, we suggest that the magmatism was dominantly controlled by fractional crystallization and crystal accumulation, with limited crustal contamination. The arc-affinity signature and weekly negative to moderately positive ε_Nd(t) values (−2.3 to 1.2) suggest that these rocks may have been generated by partial melting of the juvenile sub-continental lithospheric mantle that was metasomatized previously by slab-derived fluids. The lithologies in the JZC are related in space and time and originated from a common parental magma. Geochemical modeling suggests that their primitive parental magma had a basaltic composition. The ultramafic rocks were generated through olivine accumulation, and variable degrees of fractional crystallization with minor crustal contamination produced the diorites. The data presented here suggest that the subduction in West Qinling did not cease before the early stage of the Middle Triassic (∼242 Ma), a back-arc developed in the northern part of West Qinling during this period, and the JZC formed within the incipient back-arc.     

The impact of anoxia on pelagic macrofauna during the Toarcian Oceanic Anoxic Event (Early Jurassic)

Extreme environmental change during the Toarcian Oceanic Anoxic Event had widespread impacts on marine biota. This study provides new evidence, from the Yorkshire coast sections, UK, that the event was associated with periods of elevated fish and ammonite mortality. Using a synthesis of pelagic macrofaunal changes, benthic macrofaunal data and geochemical proxies we show that there are stratigraphical correlations between: (1) pelagic macrofaunal ranges and abundance, (2) benthic macrofaunal abundance, and (3) geochemical proxies that indicate deoxygenation. We identify eight stratigraphical intervals of differing character. Results suggest two major phases of relatively persistent deoxygenation with photic zone euxinia. The cyclostratigraphic timescale indicates that each phase lasted at least tens of thousands of years. Belemnite migration during the event probably resulted from increased seawater temperatures and low food supply similar to that observed for many marine taxa, including squid, within the present-day oceans.     

Emplacement of the La Peña alkaline igneous complex,Mendoza, Argentina (33° S): Implications for the early Miocene tectonic regime in the retroarc of the Andes

The La Peña alkaline complex (LPC) of Miocene age (18–19 Ma) lies on the eastern front of the Precordillera (32°41ʹ34ʺS, 68°59ʹ48″W, 1400–2900 m a.s.l.), 30 km northwest of Mendoza city, Argentina. It is a subcircular massif of 19 km² and 5 km in diameter, intruded in the metasedimentary sequence of the Villavicencio Formation of Silurian-Devonian age. It is the result of integration of multiple pulses derived from one or more deep magma chambers, which form a suite of silicate rocks grouped into: a clinopyroxenite body, a central syenite facies with a large breccia zone at the contact with the clinopyroxenite, bodies of malignite, trachyte and syenite porphyry necks, and a system of radial and annular dikes of different compositions. Its subcircular geometry and dike system distribution are frequent features of intraplate plutons or plutons emplaced in post-orogenic settings. These morphostructural features characterize numerous alkaline complexes worldwide and denote the importance of magmatic pressures that cause doming with radial and annular fracturing, in a brittle country rock. However, in the LPC, the attitude of the internal fabric of plutonic and subvolcanic units and the preferential layout of dikes match the NW–SE extensional fractures widely distributed in the host rock. This feature indicates a strong tectonic control linked to the structure that facilitate space for emplacement, corresponding to the brittle shear zone parallel to the N–S stratigraphy of the country rock. Shearing produced a system of discontinuities, with a K fractal fracture pattern, given by the combination of Riedel (R), anti-Riedel (R′), (P) and extensional (T) fracture systems, responsible for the control of melt migration by the opening of various fracture branches, but particularly through the NW–SE (T) fractures. Five different pulses would have ascent, (1) an initial one from which cumulate clinopyroxenite was formed, (2) a phase of mafic composition represented by dikes cross-cutting the clinopyroxenite, (3) a malignite facies that causes a small breccia in the clinopyroxenite, (4) a central syenite facies that develops breccias at the contact with the clinopyroxenite and, finally, (5) porphyry necks and a system of radial dikes intruding all units. At the moment of the emplacement different mechanisms would have acted, they summarized in: 1) opening of discontinuities synchronous to the magma circulation as the principal mechanism for formation of dikes and conduits; 2) stoping processes, that play an important role in the development of the breccia zone and enabling an efficient transference of material during the emplacement of the syenitic magma and 3) shear-related deformation (regional stress), affected the internal fabric of the facies, causing intracrystalline deformation and submagmatic flow, which is very evident in the central syenite intrusive. The kinematic analysis of shear planes allows proposing that emplacement of the LPC took place in a transtensive regime, which would have occurred in the back-arc of the Andes orogen, during a long period spanning from Miocene to the present, of the compressive deformation responsible, westward and at the same latitude, for the development of the Aconcagua fold and thrust belt.     

利用小波变换压制静态效应的方法

利用有限元大地电磁二维正演程序模拟了二层大地低阻静态效应的地电模型,研究了静态效应产生的原理及其影响,并利用小波变换方法对静态效应进行压制,相对于其他常规空间滤波法来说,取得了较好的压制效果,证实了小波变换方法在压制静态效应当中的可行性和有效性。用小波变换方法对某工区实测EH-4音频大地电磁资料数据进行分析、处理,从数学上识别和判断了静态效应,在较好地压制静态效应的同时又能较好地突出地层原本的地质异常。     

世界主要国家及地区制造业GVC地位时空格局演化——基于TiVA数据库的研究

在经济全球化和全球产业转移不断深化的背景下,不同国家在国际分工生产中所处的全球价值链（GVC）地位不同。一国能否从参与全球化中获益,日益取决于能否成功融入全球价值链,并在某一特定环节占据竞争优势。明确全球制造业大国的GVC地位,认识其国际分工及影响规律具有重要的理论价值和现实意义。利用TiVA数据库,测算世界59个国家及地区1995—2014年制造业GVC地位指数并分析其演变特征。结果显示：全球价值链地位较高的国家及地区主要分布在美洲、欧洲及东亚,位于中亚、西亚、非洲和大洋洲的国家参与极少,近年来高附加值生产环节呈现不断向少数国家及地区集中的趋势。大部分国家及地区劳动密集型行业地位较高,技术密集型地位指数较低,技术密集型行业的贸易附加值主要被少数掌握核心技术和价值链两端的国家及地区获得。从细分行业上看,核心国家及地区均呈现了分阶段演化的特征。在空间相关关系上,制造业整体和劳动密集型行业GVC地位指数均呈显著的空间集聚分布特征,且集聚程度先降低后升高,资本密集型行业GVC地位指数空间集聚分布最为显著且集聚程度不断增强,而技术密集型行业GVC地位指数空间集聚效应不明显。从空间集聚形式来看,大部分国家及地区GVC地位指数较低,贸易附加值被少数GVC地位较高的国家及地区获得。此外,外商直接投资、资本投入会抑制一国GVC地位的提升,科研创新能力对于一国GVC地位的提升起促进作用,出口规模与一国GVC地位呈明显的正向关系,行政效能对于一国GVC地位无明显影响,但是行政效能会促进外商直接投资对于GVC地位的抑制作用。