Seawater Corrosion Fatigue of Welded Joints Under Random Variable Amplitude Loading

- Offshore platforms are always subjected to wave action which is random variable amplitude cyclic loading. In order to simulate the stressing condition at the 'hot spot' of the tubular joints and the marine environment, random variable amplitude fatigue tests have been carried out on welded plate joints in sea water. The tests have been conducted under the conditions of loading frequency of 0.2 Hz, stress ratio of -1, seawater temperature of about 20℃ and cathodic protection with the potential about -850 mV, SCE. The test results have been compared with the seawater corrosion fatigue life under constant amplitude loading. Miner's linear cumulative damage summation rule has been used to predict the corrosion fatigue life under variable amplitude loading. The predicted life is in good agreement with the test data.     

LF4铝合金在海水中的腐蚀性能研究

对艇用铝材LF4及其它多种管系金属材料进行静态和动态条件下的自然电位、自然腐蚀率、电化学性能、电偶腐蚀行为等进行多方面的腐蚀试验，得出这些材料在静态和动态海水中的腐蚀性能指标以及变化规律。随着海水流速的增加，LF4铝合金耐蚀性迅速降低。LF4在天然海水中有钝化的趋势，但是钝化膜不完整易破坏。在与其它常用管系金属材料组成的电偶对中，LF4均作为阳极受到加速腐蚀。     

Experimental Investigation on Durability of Reinforced Concrete Beams in A Simulated Marine Environment

1. IntroductionConcrete is widely used for nearshore and offshore marine structures and bridges (Song et al.,2000; Wang and Song, 2004). Experience has shown that the durability of marine concrete structuresis generally good; however, some cases of serious deterioration also exist due to the lack of durability(Metha and Gerwick, 1982). Under marine conditions, concrete, especially concrete in the splashand tidal zone, is attacked, resulting in corrosion of reinforcing bars. Corrosion of rein…     

海水中近60年钢板桩的腐蚀状况

对码头入海近60年钢板桩进行研究。采用水下摄像、水下超声波测厚、水下切割取样等手段调查和检测钢桩腐蚀状况，结果表明钢板桩厚度减薄较小，腐蚀较轻。钢板桩的材质成份值得借鉴。     

Experimental and numerical behaviour of reinforced mortar plates subjected to accelerated corrosion

Most reinforced concrete structures are damaged due to corrosion of reinforcements in concrete. In normal conditions the pH near the reinforcements is around 12–13 which means that steel is in a passive state. But aggressive species, such as chloride ions or carbon dioxide, may penetrate into concrete and promote active corrosion. As a consequence (hydro)oxides are produced leading to degradation of concrete structures. For instance cracking of the concrete is generated due to the pressure induced by rust. In this paper, we study the inception and the propagation of cracking on reinforced mortar plates with rebars located either in the middle or at the corner. Additional experiments have been performed on cylindrical specimens to determine the local effect of rust pressure at the interface rust/mortar. The specimens have been subjected to imposed current density in order to enhance the corrosion and digital image intercorrelation has been used to determine displacement fields. The experiments have been compared to numerical modelling. Copyright © 2010 John Wiley & Sons, Ltd.     

Timing of Lateglacial vegetation dynamics and respective palaeoenvironmental conditions in southern Estonia: evidence from the sediment record of Lake Nakri

This paper investigates a detailed well‐dated Lateglacial floristic colonisation in the eastern Baltic area, ca. 14 000–9000 cal. a BP, using palynological, macrofossil, loss‐on‐ignition, and ¹⁴C data. During 14 000–13 400 cal. a BP, primarily treeless pioneer tundra vegetation existed. Tree birch (Betula sect. Albae) macro‐remains and a high tree pollen accumulation rate indicate the presence of forest‐tundra with birch and possibly pine (Pinus sylvestris L.) trees during 13 400–12 850 cal. a BP. Palaeobotanical data indicate that the colonisation and development of forested areas were very rapid, arising within a period of less than 50 years. Thus far, there are no indications of conifer macrofossils in Estonia to support the presence of coniferous forests in the Lateglacial period. Signs of Greenland Interstadial 1b cooling during 13 100 cal. a BP are distinguishable. Biostratigraphic evidence indicates that the vegetation was again mostly treeless tundra during the final colder episode of the Lateglacial period associated with Greenland Stadial 1, approximately 12 850–11 650 cal. a BP. This was followed by onset of the Holocene vegetation, with the expansion of boreal forests, in response to rapid climatic warming. Copyright © 2011 John Wiley & Sons, Ltd.     

The role of the chemical environment in frictional deformation: Stress corrosion cracking and comminution

The roles of chemically assisted crack and fracture propagation and chemically assisted comminution in frictional deformation are evaluated in this study. Double cantilever beam (DCB) crack propagation data are presented which show that the role of pH in chemically assisted fracture, and to a lesser extent the role of ionic concentration are important in stress corrosion cracking. Data on very slow crack growth and the stress corrosion limit are also presented. These data suggest that stress corrosion cracking may play an important role in compound earthquakes and in asperity breakdown in faults. The comminution literature is also reviewed in order to assess the role of chemically assisted comminution in frictional deformation. It appears that chemically assisted comminution may be important at low and high ionic strength because it may reduce the effective viscosity and the shear strength of fault gouge. At intermediate ionic concentration the role of pH, as an agent which enhances crack and fracture propagation, appears to be more important in reducing the coefficient of sliding friction.     

硝酸根对颗粒状铁降解三氯乙烯的影响(英文)

为研究硝酸根对颗粒状铁降解三氯乙烯的影响,进行了柱实验和相应的反应铁腐蚀电位测定。在硝酸根离子存在条件下,铁的腐蚀电位相应升高,系统条件也因之发生变化,导致钝性的铁氧化物在铁表面生成。因而,三氯乙烯和硝酸根离子降解速率明显减小, 并且降解速率减小的程度与硝酸根离子的浓度成比例。当污染液流过反应柱时,硝酸根离子与铁反应, 被还原为氨根离子。该反应造成硝酸根离子的浓度梯度,使钝化区在柱中上移,从而影响了三氯乙烯的降解曲线。与三氯乙烯单独与铁反应相比,当含4 7 mg/L硝酸根的三氯乙烯溶液流经反应柱170 孔隙体积后,降解50% 三氯乙烯所需的时间(t50) 从小于4 h增加到大于10 h;而当三氯乙烯溶液中加入100 mg/L硝酸根离子,仅17 孔隙体积溶液流经反应柱后,三氯乙烯降解t50就已大于14 h。研究结果表明,由于硝酸根离子对铁的腐蚀电位和铁表面氧化膜的不利作用,在处理靶污染物为高浓度硝酸根离子和三氯乙烯共同污染的地下水时,铁渗透反应隔栅不是最佳选择。如果靶污染物中硝酸根离子浓度比较低,则在设计铁隔栅时应考虑到硝酸根离子造成的不利因素,相应增加铁墙的厚度,从而确保三氯乙烯的降解效果。     

Study on rust layers on steel in different marine corrosion zone

IrmODUCnONTheMossbaureffect(ME)isalsoknOWnasrecoil-thenuclearresonaneabsorp-hon.MossbaursPeCboscoPy(MS)haspIDvedtobeaveryuSefultecheqUeforstudytngcormsionPimessesandcedon-cts.TheInainadvantagsofMSincormsionre-enhare:(l)thenon-deStrutivechateroftheteCboqUe;(2)possibilltyforquali-tativeandqUanitativephaanalsis;(3)uSehassinidenificationofPOOrlycrystal-lizedoramorphouscormsionpnhats.WththedeVfoPmntofInarineresomees,InansteelconstrUctionswerebulltatsea'MSwasusedforanalfongcormsion~t…     

Slow crack growth in minerals and rocks: Theory and experiments

Strength and mechanical behavior of rocks and minerals are modified by aqueous environments. This results in two effects: mechanical and chemical. The chemical effect is investigated from both a theoretical and an experimental point of view. It is shown that a thermodynamic approach leads to a satisfactory understanding of the chemical effect through an extended griffith concept. Predictions of the model have been tested using slow crack growth experiments. The experiments have been performed with a special Double Torsion apparatus which was built for this purpose. The good agreement observed between theory and experiments suggests that subcritical crack growth in rocks is controlled by adsorption onto the crack tip. This result was previously suggested by other authors (Dunning et al., 1984). However, the important consequences of the model are that (1) there should exist a threshold stress below which subcritical crack growth stops, and this threshold depends on the environment; (2) subcritical crack growth and time-dependent phenomena could take place in the crust in a stress interval which could be as high as 50% of the rupture stress.