面向带洞面状对象间的拓扑关系描述模型

为研究带洞面状对象间的拓扑关系,提出了一种25IM(25交集模型)。以点集拓扑理论为基础,对带洞面状区域的内部、边界和外部进行定义。分析了9IM(9交集模型)在表达带洞面状对象间拓扑关系方面存在的问题,将带洞面状对象分为内部、外边界、内边界、外边界外部、内边界外部共5部分,提出了一种5×5的矩阵模型,即25IM。基于点集拓扑理论,定义了8条规则来排除不符合逻辑的拓扑关系。基于25IM,对8种基本拓扑关系:相离、相接、重叠、覆盖、包含、相等、被覆盖和被包含,进行细分描述。结果表明,本文提出的25IM能够更为详细地表达带洞面状对象间的拓扑关系。     

基于三维平差的基坑监测数据处理方法探讨

在基坑监测自由测站边角交会构网监测方法的基础上,提出基于全站仪观测数据的三维平差数据处理方法。通过结合工程实例,对监测数据进行精度分析,并比较三维平差与传统平差方法的计算结果,验证文中方法可满足二级基坑的监测精度要求,能准确、高效地监测基坑形变。     

经纬仪测量系统尺度基准测定及误差分析

针对经纬仪测量系统缺少距离观测值而难以构建其尺度基准的问题,该文分别基于相似原理和垂直角视距法,阐述了通过交会测量已知长度的基准尺构建尺度基准的原理与方法;依据误差传播定律,分析指出水平基线中误差是衡量尺度基准精度的重要数字指标,而基准尺摆放位置与姿态、基准尺长度和水平基线长度等构形要素对尺度基准误差影响较大;最后基于Matlab GUI编制了水平基线中误差仿真计算程序,定量分析了各类构形要素对水平基线中误差的影响规律,归纳总结出提高尺度基准测定精度、优化系统测量空间构形的若干措施。     

全球定位系统的新进展(讲座三)——GPS中的民用测距码

介绍了C/A码、L2C码以及L5码的生成方式、测距精度及特性,并对GPS系统中测距码的扩充作了简要介绍。     

GPS近景信息采集系统及应用研究

整合GPS、数码相机以及三维数字罗盘,采用近景交会的基本原理,获取滑坡地表特征点的三维坐标,对滑坡灾害进行实时的非接触式的监测。     

Altimetry and transponder ground simulation experiment

We have designed and built a compact demonstrator unit for the investigation of altimetry and transponder applications. A small light-weight breadboard carries a compact frequency doubled Nd:YAG pulse laser, an afocal beam expansion optics, a small receiver telescope with spectral and spatial filter arrangements and a sensitive photo-detector. The output laser energy can be as high as 45 mJ with a pulse-width of 3 ns and the telescope aperture is 10 cm. Simulations [Degnan, J.J., 2006. Simulating interplanetary transponder and laser communications experiments via dual station ranging to SLR satellites. In: Proceedings of the 15th International Workshop on Laser Ranging, Canberra, Australia, pp. 457-462] suggested that the link margin for low Earth orbiting satellites (LEO) is comfortable. Successful satellite laser ranging from this dual-station experiment in several different configurations was achieved up to the MEO orbit in a 10 day provisional installation.     

大气对532nm激光影响在漫反射激光测距中的应用

激光光束在大气中的传输是与大气特征有关的,如大气湍流、大气散射与吸收,而且激光测距的回波除了与距离有关外,其回波数及精度也与大气特征相关。漫反射激光测距的目标是低轨空间碎片,在一定反射截面的条件下,应用一定功率的激光进行地面靶板漫反射测距试验,以确定多少功率的激光器可实现空间碎片的漫反射测距,这时地面靶的距离选取应该具有代表性,它代表了在一定斜程下穿过整个大气层的效应。通过对大气湍流和大气衰减对激光传输的影响进行分析,理论上计算出在低轨目标为400km时,漫反射激光测距试验地面靶的水平距离该取多远时才能代表在一定斜程下穿过400km大气层的效应,从而为漫反射激光测距试验地面靶距离的选取提供参考依据。     

Tectono‐metamorphic history recorded in garnet porphyroblasts: insights from thermodynamic modelling and electron backscatter diffraction analysis of inclusion trails

In a Barrovian metamorphic sequence, garnetiferous mica schists document a heterogeneously developed superposition of sub‐orthogonal fabrics and multiple garnet growth episodes. In the variably deformed domains, four types of garnet porphyroblasts have been defined based on inclusion trail patterns. Modelled garnet zoning in the MnNCKFMASHTO system indicates a prograde evolution from 4–4.5 kbar and 490–510 °C to 5–6 kbar and 520–550 °C in the earliest subhorizontal fabric progressing towards 6.5–7.5 kbar and 560–590 °C in the subsequent subvertical foliation. This fabric is heterogeneously deformed into a shallow‐dipping retrograde foliation associated with garnet resorption. In situ electron backscatter diffraction measurements of ilmenite inclusions in individual garnet grains yield precise data on included planar and linear elements. Consistent orientations of internal foliations, lineations and foliation intersection axis sets indicate a superposition of three sub‐orthogonal foliation systems. Weak variations of internal records with increasing intensity of deformation suggest that a moderate buckling stage occurred, but apparent lack of porphyroblast rotation is interpreted as a result of dominant passive flow. Coupling the orientation of internal fabric sets with P–T estimates is used to complement the tectono‐metamorphic evolution of the thickened crust. We demonstrate that garnet porphyroblasts preserve features which reflect large‐scale tectonic processes in orogens.     

甚低频电磁法在河南省竹园铜矿的应用

简要叙述了甚低频电磁法的方法技术，并以河南省西峡县竹园铜矿为例，介绍了甚低频法寻找铜多金属硫化物矿床的显著效果。结合工作效果，对甚低频法的不足之处提出了3点看法。     

Glonass Laser Ranging Accuracy With Satellite Signature Effect

GLONASS satellites have been tracked by the worldwide laser ranging networkas well as by the GLONASS-borne microwave-based technique. Owing to thelarge size of their corner cube reflector arrays, the amount of ranging data is enough to determine their orbits from laser ranging data alone. We found, however, that the large size of the array affected the accuracy of measurement to an extent that is dependent on the characteristics of the ranging systems. An azimuthal variation of the reflector array response was also detected in observations from single-photon laser ranging. Orbital analysis reveals that the effect makes the measured range on average 22 mm shorter than expected in the absence of the large array, which explains more than half of the offset of 39 mm previously discovered between microwave and laser orbits.