Soil‐pile interaction in the pile vertical vibration considering true three‐dimensional wave effect of soil

The dynamic response of an end bearing pile embedded in a linear visco‐elastic soil layer with hysteretic type damping is theoretically investigated when the pile is subjected to a time‐harmonic vertical loading at the pile top. The soil is modeled as a three‐dimensional axisymmetric continuum in which both its radial and vertical displacements are taken into account. The pile is assumed to be vertical, elastic and of uniform circular cross section. By using two potential functions to decompose the displacements of the soil layer and utilizing the separation of variables technique, the dynamic equilibrium equation is uncoupled and solved. At the interface of soil‐pile system, the boundary conditions of displacement continuity and force equilibrium are invoked to derive a closed‐form solution of the vertical dynamic response of the pile in frequency domain. The corresponding inverted solutions in time domain for the velocity response of a pile subjected to a semi‐sine excitation force applied at the pile top are obtained by means of inverse Fourier transform and the convolution theorem. A comparison with two other simplified solutions has been performed to verify the more rigorous solutions presented in this paper. Using the developed solutions, a parametric study has also been conducted to investigate the influence of the major parameters of the soil‐pile system on the vertical vibration characteristics of the pile. Copyright © 2013 John Wiley & Sons, Ltd.     

利用Abel-Poisson径向基函数模型化局部重力场

多种类型高分辨率重力场数据的不断增加,使得在局部范围内精化重力场模型成为了可能。本文采用Abel-Poisson核将重力场量表示成有限个径向基函数线性求和的形式,对局部区域的多种重力场数据进行联合建模。为了提高运算速度,运用了基于自适应精化格网算法的最小均方根误差准则(RMS)来求解径向基函数平均带宽。以南海核心地区为例,联合两种不同类型、不同分辨率的重力场资料(大地水准面起伏6'×6'、重力异常2'×2'),构建了局部区域高分辨率的重力场模型。所建模型表示的重力场参量达到了2'×2'的分辨率,对原始的重力异常数据(2'×2')拟合的符合程度达到±0.8×10-5m/s2。结果表明,利用径向基函数方法进行局部重力场建模,避免了球谐函数建模收敛慢的问题,有效提高了模型表示重力场的分辨率。     

利用引力梯度数据计算径向梯度的优化方法

根据重力梯度观测各分量的方差及协方差信息,提出了利用GOCE梯度数据计算径向重力梯度的优化方法。首先给出了径向重力梯度的计算方法,并深入分析了误差传播规律,通过建立相应的条件极值问题,给出了计算径向重力梯度最优组合因子的方法;通过模拟数据验证了本文所提出的优化因子的优越性。实际数据计算表明:相对于传统方法,采用优化组合因子可使反演所得引力位模型的累积大地水准面精度在250阶时提高约2 cm。由于径向重力梯度不仅可以用于地球引力场模型的求解,也可直接应用于地球物理问题的讨论,因此本文所提出的优化方法也可对部分地球动力学问题的讨论提供方便。     

广义残差地形模型及其在局部重力场逼近中的应用

研究了残差地形模型中的非调和性问题,比较了基于棱柱体和球冠体的积分模型,提出了基于球冠体积分的广义残差地形模型。以泊松小波径向基函数为构造基函数,结合广义残差地形模型,融合多源实测重力数据构建了局部区域重力场模型。研究结果表明:基于棱柱体积分的残差地形模型精度较低,在山区可能引入毫伽级以上的误差,建议采用更为接近真实地形表面的球冠体积分模型。相比于原始的残差地形模型,基于球冠体积分的广义残差地形模型能更为精确地逼近局部重力场模型中地形因素引起的高频效应。     

辐射井技术在尾矿库降排水工程中的应用

尾矿库是我国重大危险源之一,而尾矿库内的浸润线又是坝体安全的重要指标之一,为有效排出尾矿中的水,降低尾矿库内浸润线,本文通过辐射井技术在尾矿库降排水工程中应用的多个成功工程实例,归纳、总结并提出该技术在尾矿库应用过程中的设计思路、施工要点及工艺方法等。     

Ontogenic variation and effect of collection procedure on leaf biomechanical properties of Mediterranean seagrass Posidonia oceanica (L.) Delile

Leaf mechanical traits are important to understand how aquatic plants fracture and deform when subjected to abiotic (currents or waves) or biotic (herbivory attack) mechanical forces. The likely occurrence of variation during leaf ontogeny in these traits may thus have implications for hydrodynamic performance and vulnerability to herbivory damage, and may be associated with changes in morphologic and chemical traits. Seagrasses, marine flowering plants, consist of shoot bundles holding several leaves with different developmental stages, in which outer older leaves protect inner younger leaves. In this study we examined the long‐lived seagrass Posidonia oceanica to determine ontogenic variation in mechanical traits across leaf position within a shoot, representing different developmental stages. Moreover, we investigated whether or not the collection procedure (classical uprooted shoot versus non‐destructive shoot method: cutting the shoot without a portion of rhizome) and time span after collection influence mechanical measurements. Neither collection procedure nor time elapsed within 48 h of collection affected measurements of leaf biomechanical traits when seagrass shoots were kept moist in dark cool conditions. Ontogenic variation in mechanical traits in P. oceanica leaves over intermediate and adult developmental stages was observed: leaves weakened and lost stiffness with aging, while mid‐aged leaves (the longest and thickest ones) were able to withstand higher breaking forces. In addition, younger leaves had higher nitrogen content and lower fiber content than older leaves. The observed patterns may explain fine‐scale within‐shoot ecological processes of leaves at different developmental stages, such as leaf shedding and herbivory consumption in P. oceanica.     

不同刚度植物杆群对规则波传播及紊动特性影响研究

以不同刚度硅胶圆杆群为概化植物模型,测定其抗弯弹性模量,通过波浪水槽实验,研究规则波在不同刚度植物杆群内的流速分布、紊动特征及不同刚度杆群的消浪效果。实验结果表明,当波浪通过柔性杆群时,受其摆动的影响,流速周期变化从单峰型逐渐转变成双峰型,杆群刚度越小形成的二次波峰越明显;不同刚度杆群内水体紊动强度变化显示,杆群刚度越大,造成杆群内水体的紊动强度越大;随着杆群抗弯弹性模量的增大,其消浪系数也增大,消浪系数的增长与材料的抗弯弹性模量值非线性关系,而是在某一弹性模量范围内,对消浪系数的影响较为敏感。     

2-D delineation of individual citrus trees from UAV-based dense photogrammetric surface models

One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures.     

EFFECT OF SLAB FLEXIBILITY ON INTERACTION BETWEEN TWO CIRCULAR FOUNDATIONS

The paper is aimed at investigating the effect of foundation rigidity on dynamic stiffness for two circular foundations on a viscoelastic medium. To generate the dynamic stiffness, a substructure technique is employed. For the substructure of a viscoelastic medium, the solution for wave motion reported in Reference 11 is used. For the substructures of two flexible foundations, classical plate theory with the inertial force neglected is employed to find the displacement fields of the foundation plates subjected to the interaction stresses. Then, the continuity condition for all the substructures is imposed implicitly by using the variational principle; then with the help of the reciprocal theorem the dynamic stiffness for the two flexible foundations can be obtained. For the numerical study, the boundary condition at the rims of both foundation plates is assumed to be a hinge connection to superstructures. Some numerical investigations are performed and the effect of foundation rigidity on dynamic stiffness is examined. Some discussions and conclusions are also made.     

SEQUENTIAL STIFFNESS DESIGN FOR SEISMIC DRIFT RANGES OF A SHEAR BUILDING–PILE–SOIL SYSTEM

A shear building supported by a prescribed pile–soil system is subjected to bedrock earthquake input. A new design procedure is presented for generating a sequence of stiffness designs satisfying the constraints on interstorey drifts. The mean peak interstorey drifts of the shear building subjected to a set of spectrum-compatible ground motions at the bedrock are evaluated by a modal combination rule. Tuning of the fundamental natural period of a shear building with a fixed base with that of a shear beam ground results in a non-monotonic sequence of stiffness designs with respect to a ground stiffness parameter and previous approaches cannot be applied to such a problem. This difficulty in finding such a non-monotonic sequence is overcome by utilizing the ground stiffness parameter and the superstructure stiffness parameter alternately in multiple design phases and by developing a new multi-phase perturbation technique. Fundamental characteristics of this sequence of stiffness designs and the effect of ground stiffnesses on the design of the shear building are disclosed. It is further shown that the stiffness contour method is also useful for the design procedure such that a scattering effect in the estimates of ground stiffnesses is taken into account. The usefulness of the proposed procedure of sequential stiffness design and contour line method is demonstrated through several sequential design examples.