吕宋海峡内波吸引子的三维数值模拟

Internal waves propagate along wave beams that are inclined with respect to the horizontal plane. It is conjectured that the internal waves generated in the Luzon Strait may be confined between the double ridges in the strait and concentrate to a closed trajectory, the so-called internal wave attractor, due to the reflection of wave beams from the lateral boundaries, sea surface and bottom. This work carried out two experiments using a three dimensional non-hydrostatic general circulation model, MITgcm, to investigate the possibility that the ridges in the Luzon Strait allows for internal wave attractors. Baroclinic current in both of the experiments demonstrate the forming of ring-like patterns in some section around 20° and 21°N, indicating that the development of the internal wave attractors are allowed in the Luzon Strait. The different resolutions and initial conditions in the two experiments also reveal that the internal-wave-attractor phenomenon is robust in this region.     

Soil-Structure Interaction Analysis of Jack-up Platforms Subjected to Monochrome and Irregular Waves

As jack-up platforms have recently been used in deeper and harsher waters, there has been an increasing demand to understand their behaviour more accurately to develop more sophisticated analysis techniques. One of the areas of significant development has been the modelling of spudcan performance, where the load-displacement behaviour of the foundation is required to be included in any numerical model of the structure. In this study, beam on nonlinear winkler foundation (BNWF) modeling—which is based on using nonlinear springs and dampers instead of a continuum soil media—is employed for this purpose. A regular monochrome design wave and an irregular wave representing a design sea state are applied to the platform as lateral loading. By using the BNWF model and assuming a granular soil under spudcans, properties such as soil nonlinear behaviour near the structure, contact phenomena at the interface of soil and spudcan (such as uplifting and rocking), and geometrical nonlinear behaviour of the structure are studied. Results of this study show that inelastic behaviour of the soil causes an increase in the lateral displacement at the hull elevation and permanent unequal settlement in soil below the spudcans, which are increased by decreasing the friction angle of the sandy soil. In fact, spudcans and the underlying soil cause a relative fixity at the platform support, which changes the dynamic response of the structure compared with the case where the structure is assumed to have a fixed support or pinned support. For simulating this behaviour without explicit modelling of soil-structure interaction (SSI), moment-rotation curves at the end of platform legs, which are dependent on foundation dimensions and soil characteristics, are obtained. These curves can be used in a simplified model of the platform for considering the relative fixity at the soil-foundation interface.     

基于半数值方法的限弯器剪弯刚度分析

柔性管缆限弯器存在接触非线性导致剪弯刚度分析困难。为此先基于悬臂梁方程建立剪弯刚度理论模型;然后构建考虑接触边界的锁合结构数值模型,得到其扭转刚度曲线;最后结合理论分析和数值计算求得考虑接触非线性的限弯器剪弯刚度曲线,并同传统的整体数值方法相比较,验证该半数值分析方法的有效性。对比发现基于半数值方法的限弯器剪弯计算效率远高于传统数值方法,其结果误差也满足工程需求;并且限弯器锁合结构处受接触边界影响有明显的非线性;限弯器子梁这一短梁结构基于Timoshenko梁理论计算的结果精度更高也更保守。相较于传统数值方法,该半数值方法用方程直接表达部分参数与剪弯刚度关系,并可以高效地分析限弯器剪弯刚度,使设计工作更加高效。     

波束角偏差对多波束测量的影响及校正

波束角偏差是影响多波束系统测量精度的因素之一,严重时导致测量的海底地形成凸凹形状的伪地形。论述了波束角偏差产生的原因以及对多波束系统测量精度的影响,介绍了借用EM系列多波束系统配置的横向参数校准软件对波束角偏差进行校正的方法,经实际应用,该方法很好地校正了波束角偏差,提高了测量数据的精度。     

板钉连接CFST柱-RC梁节点梁端塑性铰区受力性能数值模拟

建立竖板-栓钉连接钢管混凝土（CFST）柱-钢筋混凝土（RC）梁节点试件（SSJD）拟静力加载试验有限元模型,并在节点损伤情况、梁端荷载-位移曲线等数值模拟结果与试验结果吻合较好的基础上,进一步开展了RC梁混凝土强度、配筋率ρ_s和连接竖板长度L_b及界面连接情况等对CFST柱-RC梁节点梁端塑性铰区域力学性能的影响。研究结果表明,RC梁混凝土强度对试件SSJD塑性铰区域受力性能的影响较小;适筋范围内RC梁配筋率增加可适当提高试件SSJD承载力和延性;随着连接竖板长度的增加,梁端塑性铰区域外移,梁破坏荷载增大;本研究给出的RC梁与CFST柱之间的界面抗剪承载力模拟值与计算值吻合较好,可用于界面抗剪设计。     

常梯度声线跟踪中平均声速的改进算法

在对多波束测深常用声线跟踪算法进行分析的基础上,提出了一种改进的声线跟踪算法,即沿声线传播的圆弧路径进行积分来求取层内的平均声速,进而推导了严密的多波束测深波束脚印位置的计算公式。理论推导表明,常用的声线跟踪算法的平均声速是将声线的圆弧传播路径当作对应弧段弦时的改进算法平均声速的近似解。实验表明,改进的声线跟踪算法比常用的声线跟踪算法更严密。     

一种基于定向技术的Ad Hoc路由协议

基于MAC层的定向技术&提出了一种适合于Ad hoc无线网络的协议APRP协议,协议考虑了MAC层和网络层信息的共享和交互,改进了动态源路由协议DSR的路由发现和路由维护机制.采用NS2工具对协议性能进行了仿真研究,结果表明APRP协议不仅可以利用定向技术能量利用率的优势,而且还能较好地保持节点移动情况下的吞吐量,降低端到端数据包延时和路由开销     

利用窄线宽激光测量锶原子束速率分布

利用多普勒频移效应,通过线宽2MHz窄线宽激光与锶原子束在大角度作用下的荧光信号分析,测量了锶原子束速率分布。比较和分析表明,理论结果与实验结果符合较好。     

考虑楼板作用的SRC柱-钢梁混合框架动力时程分析

为了解楼板空间作用对型钢混凝土(SRC)柱-钢梁混合框架抗震性能的影响,利用有限元软件ABAQUS分别建立带有楼板和不带楼板的两跨三层SRC柱-钢梁框架,选取2组天然波和1组人工波对其进行弹塑性分析,对比2种框架结构的型钢应力分布、混凝土板损伤、层间相对位移角以及框架基底剪力,分析楼板在结构抗震中的影响规律。结果表明:增加楼板可以有效增加框架抗侧刚度,最大可使层间位移角降低38.7%;同时可以减小核心区梁端塑性区域的面积,减缓型钢上翼缘应力发展速度;而且楼板的存在可使最大基底剪力提升60.7%,有利于减小结构损伤和提高抗震性能。     

不同跨高比对多层钢框架内填混凝土深梁结构抗震性能影响

为了研究不同跨高比多层钢框架内填混凝土深梁结构的抗震性能,在钢框架内填混凝土深梁滞回性能试验的基础上,利用ABAQUS对六层纯钢框架（结构一）、钢框架内填跨高比为2混凝土深梁结构（结构二）和钢框架内填跨高比为0.75混凝土深梁结构（结构三）进行弹塑性时程分析。结果表明:内填混凝土深梁使结构整体刚度明显增大;在地震波的作用下,结构二的最大顶点位移降低可达58.3%,结构三的最大顶点位移降低可达89.3%,内填混凝土深梁,结构的抗侧移性能得到了极大改善,且随着深梁跨高比的减小而大幅度提升;结构二滞回曲线饱满,呈现纺锤形,混凝土深梁充分起到了第一道防线作用。经济合理的钢框架内填混凝土深梁结构具有一定的工程应用价值。