双频相位求差法探测与修复周跳特性分析

周跳的探测与修复是GPS载波相位数据处理中一项重要的任务。首先介绍了双频相位求差法探测与修复周跳的原理;其次,利用Fortran语言编制了相应的程序,并通过实例分析了在不同采样率下探测周跳与修复的效果;最后讨论了该方法探测周跳的不足。     

边界层风廓线雷达在降水时段中的在线分析应用研究

本研究提出了一种在边界层风廓线雷达连续运行的降水探测时段中对降水频谱进行在线分析的新的应用方式。详细介绍了边界层风廓线雷达在线分析原理和方法。同时结合典型降水频谱个例,分析了可获得的多个潜在的气象参数和信息。并指出,该在线分析方式的实施可以使风廓线雷达的应用领域从晴空探测向降水测量拓展;有效缓解当前风廓线雷达应用存在的瓶颈问题;间接证明边界层风廓线雷达组网间距不固定的观点。文章分析说明,随着在线分析方式的推广应用,边界层风廓线雷达将成为单站精细化气象探测和预报/服务的重要工具。     

Effect of flying altitude and pulse repetition frequency on laser scanner penetration rate for digital elevation model generation in a tropical forest

In tropical forests, the penetration ability of airborne laser scanning (ALS) may be limited because of highly dense vegetation cover. However, in the typical planning of ALS surveys, the ability of laser pulses to penetrate forests is not considered. Nine round-trip flight lines covering the area of a tropical forest on the northeast side of the Tsengwen Reservoir in Taiwan were designed in this study. Five flight lines flew at altitudes of 1.525, 1.830, 2.135, 2.440, and 2.745 km, and the other four had pulse repetition frequencies (PRFs) of 100, 150, 200, and 250 kHz. The laser penetration index (LPI) is a quantitative index measuring the penetration ability of the ALS and consists of the ratio of the number of laser pulses reaching the forest floor to the total number of laser pulses. The LPI was used to represent the laser penetration rate and investigate the influence of flying altitude and PRF on the LPI. The results showed that as the flying altitude decreased by 1 km, the average LPI increased by 10%, and as the PRF decreased by 50 kHz, the average LPI increased by 2%. The effect of the LPI on digital elevation models (DEMs) was confirmed by visual images obtained by DEMs at five altitudes. The DEM obtained at an altitude of 2.745 km was coarsely textured, whereas that obtained at an altitude of 1.525 km was finely textured. The in-situ height data obtained from the electronic Global Navigation Satellite System (eGNSS) were compared with the data of the ALS-generated DEMs. The results indicated that when the LPI ≥60%, the height difference between the in situ data and DEM data was not prominent. However, when the LPI <60%, the ALS-derived DEM could be higher or lower than the in-situ height; the largest difference between the two was 1.7 m. The LPI of a forest should be considered for ALS survey planning, especially when consistent DEM precision for large tropical forest areas is paramount.     

Channel response to a dam-removal sediment pulse captured at high-temporal resolution using routine gage data

In this study, we captured how a river channel responds to a sediment pulse originating from a dam removal using multiple lines of evidence derived from streamflow gages along the Patapsco River, Maryland, USA. Gages captured characteristics of the sediment pulse, including travel times of its leading edge (~7.8 km yr⁻¹) and peak (~2.6 km yr⁻¹) and suggest both translation and increasing dispersion. The pulse also changed local hydraulics and energy conditions, increasing flow velocities and Froude number, due to bed fining, homogenization and/or slope adjustment. Immediately downstream of the dam, recovery to pre-pulse conditions occurred within the year, but farther downstream recovery was slower, with the tail of the sediment pulse working through the lower river by the end of the study 7 years later. The patterns and timing of channel change associated with the sediment pulse were not driven by large flow or suspended sediment-transporting events, with change mostly occurring during lower flows. This suggests pulse mobility was controlled by process-factors largely independent of high flow. In contrast, persistent changes occurred to out-of-channel flooding dynamics. Stage associated with flooding increased during the arrival of the sediment pulse, 1 to 2 years after dam removal, suggesting persistent sediment deposition at the channel margins and nearby floodplain. This resulted in National Weather Service-indicated flood stages being attained by 3–43% smaller discharges compared to earlier in the study period. This study captured a two-signal response from the sediment pulse: (1) short- to medium-term (weeks to months) translation and dispersion within the channel, resulting in aggradation and recovery of bed elevations and changing local hydraulics; and (2) dispersion and persistent longer-term (years) effects of sediment deposition on overbank surfaces. This study further demonstrated the utility of US Geological Survey gage data to quantify geomorphic change, increase temporal resolution, and provide insights into trajectories of change over varying spatial and temporal scales.     

当代生物多样性剧减与古-中生代之交生物绝灭的对比

18世纪以来人类活动对环境造成了强烈破坏,给生物多样性带来了巨大损失.为了了解生物多样性的变化趋势,利用"绝灭物种统计法"、"种-区曲线法"和化石记录对400年以来的生物多样性和古-中生代之交的生物绝灭进行了分析.当代生物多样性剧减表现为物种的快速绝灭(从8×104种/Ma增大到1.2×106种/Ma),而属的绝灭几乎为0;古-中生代之交生物绝灭的初始阶段也表现为物种的快速绝灭(从40种/Ma增大到150种/Ma),并且这个阶段的属的绝灭速率远低于绝灭高峰阶段的相应值(即66属/Ma远小于465属/Ma),可见当代生物多样性剧减相当于二叠-三叠系之交生物绝灭的初始阶段.     

水中丝爆等离子体破岩机理研究

在隧道开挖、矿山开采等基础工程建设中,岩石爆破技术发挥着重要作用。等离子体碎岩技术具有无污染,破碎过程中无飞石、无有害气体的产生,使用方便,作业效率高,是替代炸药碎岩的最有效可行的方法。本文研究了水中丝爆产生等离子体破碎岩石的机理,分析了高电压脉冲放电过程中的铜丝融化过程,建立了铜丝在各阶段变化的电阻模型,利用MATLAB对不同阶段放电电路的电流进行了数值仿真分析,并与实验得到的电流波形进行对比。研究发现,电流波形,上升沿时间越短,脉冲放电效果越好。铜丝变化产生等离子体的过程中,等离子体通道具有一定的电阻性。实验数据结果与模型数值计算结果基本相符。     

山东半岛石笋记录的倒数第二次冰消期δ18O变化特征及其气候环境意义

文章基于山东半岛岩溶洞穴(上小峰洞)一根长约41 cm的石笋SD1的铀系测年和稳定同位素组成分析,获得138. 0~125. 8 ka B. P.平均分辨率为30年的石笋δ18O 和δ13C时间序列,并据此讨论了倒数第二次冰消期区域气候和环境变化的特征及与全球变化的联系.在倒数第二次冰消期,上小峰洞石笋( SD1)δ18O的变化与中国南方石笋δ18O的变化具有类似的阶段变化特征,进一步确认了冰消期北大西洋气候对亚洲季风的重要影响.通过对山东石笋高分辨δ18O记录进行时间序列分析,发现该记录存在显著的约60年、 75年和1620年周期,表明太阳活动和北大西洋涛动与该地区气候变化有紧密的联系.同时,通过对比东亚季风区高分辨率石笋记录,认为在倒数第二次冰消期为"两步冰消"的变化特征.除此之外,上小峰洞石笋碳酸盐δ18O冰期和间冰期平均值的差异仅为0. 7‰,远小于内陆洞穴石笋碳酸盐δ18O冰期和间冰期平均值的差异(羊口洞约为1. 4‰,董哥洞约为2. 2‰,三宝洞约为2. 4‰).这一显著差异可能主要源于海岸线迁移造成的海陆格局的变化对区域季风降水及降水氧同位素组成的重要影响;并且冰期-间冰期海平面变化对近海环境记录、大陆架下垫面、海洋沉积物气候指标等都可能产生影响.     

鄂尔多斯盆地渭北地区上三叠统延长组长7油层组碳酸盐结核中自生碳酸盐矿物的特征

早期形成的碳酸盐结核在埋藏期间会经历多种碳酸盐矿物相沉淀的复杂胶结作用,岩石学研究是探究结核成因的关键。通过野外剖面观察、岩石学观察和阴极发光技术,分析了鄂尔多斯盆地渭北地区上三叠统延长组长7油层组泥页岩中各种形状的方解石和白云石结核中自生碳酸盐矿物的特征。这些结核为成岩早期的产物,构成结核的自生碳酸盐矿物特征显著:(1)球粒方解石结核中,方解石呈纤维状或刃片状,球粒间充填晶粒方解石或因压实呈贴面结合,纤维状方解石发桔红色和暗红色2种光,刃片状方解石发暗红色光;(2)粉晶方解石结核中,方解石呈他形粒状,含有机质包裹体或纤维状晶形残余,晶间含沥青和纤维状方解石残余,主要发暗红色光;(3)白云石结核有泥晶和粉晶2种晶体类型,粉晶白云石结核含较多泥质,泥质条带或有机质条带处常见纤柱状白云石;(4)沿裂缝充填的方解石和白云石常呈纤维状或纤柱状结构,发暗红色光或不发光。研究区长7油层组碳酸盐结核中的方解石和白云石具有不同的成因类型和复杂的胶结作用:球粒方解石和泥晶白云石代表了结核开始形成时的胶结作用,可以准确地反映结核的成因;粉晶方解石、粉晶白云石反映了交代成因;裂缝中纤维状、纤柱状方解石和白云石集合体则为结核经历了较强压实作用之后充填裂缝而成。     

基于分数阶Fourier变换的高性能SAR成像算法

传统距离多普勒算法（RD）较低精度的SAR成像质量越来越不能满足当前实际应用的需要。为解决传统距离多普勒算法成像性能低的问题,本文提出基于分数阶Fourier变换的高性能SAR成像算法（FrFT-RD）。本文详细推导SAR距离向信号运用分数阶Fourier变换时最佳阶数的计算表达式,同时给出方位向相应的计算式。理论分析表明距离（方位）向最佳阶数均取决于SAR成像参数并具有唯一性,无须迭代运算,可极大提高FrFT-RD算法的工程实用性。根据计算得到的距离向和方位向上最优阶数,在分数阶Fourier变换域完成FrFT-RD算法的构建。机载SAR模拟数据和星载SAR实测数据测试表明,FrFT-RD算法在分辨率、峰值旁瓣比（PSLR）成像性能方面比传统RD算法均得到显著提高,其中距离向和方位向分辨率提高比值分别为45.92%和48.06%;距离向PSLR和ISLR降低幅度为1.45 dB和2.59 dB,而FrFT-RD算法在方位向PSLR和ISLR成像性能方面与传统RD算法相当。