悬对沙Mellor-Yamada海洋边界层模型计算结果的影响

为了分析海洋水体垂向水流紊动及紊动交换情况而采用了一维的海洋边界层模型(Mellor-Yamada)并利用数值实验的方法对悬沙、盐度、温度等数据进行分析。原模型未将悬沙考虑在内，本文试将它引入进去探讨由于它的存在对紊动混合特性的影响。2000年4月，Mellor将最初的模型引入了依赖于Richardson数的紊动动能耗散率。本文通过比较具有悬沙和不具有悬沙两种情况下的速度、温度和盐度垂向分布随时间的变化，分析讨论由于悬沙的存在所引发的密度层化对紊动混合作用的影响，并发现悬浮泥沙抑制了部分模拟时间的紊动混合作用。     

杭州湾乍浦断面潮流分布特征

根据2000年9月在杭州湾乍浦断面设置的8个潮流同步观测站的资料,对该断面潮流分布特征进行了分析和探讨,结果表明:该断面大潮涨急时呈现两个大流速核;断面南部的流速要比北部的大,涨潮流速大于落潮流速。这对了解杭州湾水文特征有着一定意义,同时为杭州湾跨海大桥的设计建设提供参考。     

北部湾三维风生流及密度流模拟

将Casulli差分格式引入三维物理海洋模型计算，模拟了北部湾风生流及密度流。模拟结果表明，夏季西南季风在北部湾导致一个顺时针环流，夏季海水密度梯度导致一个逆时针方向的环流，密度流明显强于风生流；冬季东北寒潮导致一个逆时针环流。模拟结果不支持北部湾夏季为一顺时针环流、冬季为逆时针环流的传统结论，而支持终年为逆时针环流的观点。     

北方地区秋季日本对虾室内高密度精养的试验

为充分利用每年的8月以后直到翌年3月份都处于休闲状态的育苗场设施资源，笔者于1999年8月在河北黄骅进行日本对虾室内高密度精养的试验。在水温23－28℃、盐度28－32下，8月27日放苗，11月24日收成，养殖时间87d，单位水体产量平均为0．818kg/m^3，平均存活率为50．1％，旬生长率平均为0．75cm，成虾体长平均8cm，饵料系数为2．51，投入与产出比为2．5，平均单位水体创利63．83元／m^3，其结果说明本养殖模式不仅是可行的，而且具有利用率和效益高、实用性强的优点。本文还就相关问题进行了讨论。     

影响萼花臂尾轮虫种群增长的生态学因子的研究：温度和饵料密度的影响

本文研究了在5个温度梯度和4个饵料密度的20个试验组合下，萼化臂尾轮虫（Brachionuscalyciflorus）的种群增长规律。结果表明，该轮虫实验种群的最适温度范围是28—32℃，临界高温是36－40℃；最适饵料密度是45－65×106个／ml。这两个生态因子的最佳组合是温度32℃，饵料密度为65×106个／ml，此时，种群达最大密度3．4×103个／ml。     

Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model.     

Algorithm for HF radar vector current measurements

A new algorithm is proposed, called the stream function method (SFM) for producing vector current maps from radial data measured by dual-site high frequency surface wave radar (HFSWR). In SFM, a scalar stream function is constructed under some oceanographic assumptions. The function describes the two-dimensional (2-D) ocean surface water motion and is used to obtain the distribution of vector currents. The performance of SFM is evaluated using simulated radial data, which demonstrates that SFM has advantages over typical vectorial combination methods (VCM) both in error acceptance and robustness, and excels another method based on least-squares fitting (LSF) in recovering the complicated current models. Furthermore, SFM is capable of providing the total currents based on radials from single-site radar. We also test the assumptions of horizontal non-divergence in the simulation. The new algorithm is applied to the field experiment data of Wuhan University’s ocean state measuring and analyzing radar (OSMAR), collected in the coastal East China Sea during April 11–17, 2004. Quantitative comparisons are given between radar results by three current algorithms and in-situ current meter measurements. Preliminary analysis of the vertical current shear is given based on the current meter measurements.     

Tectonic core of a sedimentary drift: a potential ridge propagation feature beneath the Blake Outer Ridge

The Blake Outer Ridge is a 480–kilometer long linear sedimentary drift ridge striking perpendicular to the North American coastline. By modeling free-air gravity anomalies we tested for the presence of a crustal feature that may control the location and orientation of the Blake Outer Ridge. Most of our crustal density models that match observed gravity anomalies require an increase in oceanic crustal thickness of 1–3 km on the southwest side of the Blake Outer Ridge relative to the northeast side. Most of these models also require 1–4 km of crustal thinning in zone 20–30 km southwest of the crest of the Blake Outer Ridge. Although these features are consistent with the structure of oceanic fracture zones, the Blake Outer Ridge is not parallel to adjacent known fracture zones. Magnetic anomalies suggest that the ocean crust beneath this feature formed during a period of mid-ocean ridge reorganization, and that the Blake Outer Ridge may be built upon the bathymetric expression of an oblique extensional feature associated with ridge propagation. It is likely that the orientation of this trough acted as a catalyst for sediment deposition with the start of the Western Boundary Undercurrent in the mid-Oligocene.     

长期非平稳荷载调谐质量减振阻尼器优化设计

研究外荷载为长期非平稳随机过程。考虑长期荷载的特性 ,采用 1个概率谱密度函数来反映长期非平稳随机荷载及其特征 ;概率谱密度函数是基于大量的一般谱密度函数的统计特性获得。以延长结构的抗疲劳使用寿命为目标函数 ,提出了调谐质量减振阻尼器的优化设计方法 ,这在实际工程中有着极为广阔的应用前景。本文旨在从理论上发展长期非平稳随机荷载作用下调谐质量减振阻尼器的优化设计方法 ;文中采用长期波浪实测数据 ,给出了 1个数值算例说明整个设计过程。