0.25—3.75GPa和20—370℃条件下0.025molNaCl溶液电导率研究

在０．２５－３．７５ＧＰａ和２０－３７０℃条件下测量了ＮａＣｌ溶液的电导率。结果表明（１）电导率随温度增高而增大，且电导率的对数与温度的倒数为线性关系，但不同压力不其斜率不同。（２）电导率与压力的 关系较为复杂，存在着不连续性。即在２．２５－３．３７ＧＰａ压力范围，电导率随压力增大而增大；在１．２５－２．００ＧＰａ压力范围，电导率与压力几乎无关；０．７５ＧＰａ压力的电导率高于相邻力的电导率。上述。     

Application of an optimum design technique for determining the coefficient of consolidation by using piezocone test data

For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation from piezocone test results. However, depending on assumptions and analytical techniques, it could vary considerably, even for a specific degree of consolidation. In this paper a method is proposed to determine a consistent coefficient of consolidation by applying the concept of an optimum design technique over all ranges of the degree of consolidation. Initial excess pore pressure distribution is assumed to be capable of being obtained by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of a two-dimensional linear-uncoupled axi-symmetric consolidation analysis. The minimization of differences between measured and predicted excess pore pressure was carried out by the BFGS unconstrained optimum design algorithm with a one-dimensional golden section search technique. By analyzing numerical examples and in-situ test results, it was found that the adopted optimum design technique gives consistent and convergent results.     

桩后劈裂压浆施工技术

阐述了桩后劈裂压浆提高单桩承载力的机理、使用设备、操作方法工艺参数和操作注意事项，并对劈裂压浆的压入量及压力进行了初步探讨。     

Windows95下帮助系统的开发策略和技巧

Ｈｅｌｐ是能够为用户提供快捷访问的联机帮助信息。现在，研制联机Ｈｅｌｐ帮助系统已成为软件开发过程中必不可少的项目之一。正如其它的任何工程项目一样，Ｈｅｌｐ的制作也需要精心地策划和编排，需要充分发挥Ｈｅｌｐ开发软件的功能，以制作出满足用户要求的高水平的联机帮助系统。笔者就这些方面的内容，论述了开发Ｗｉｎｄｏｗｓ９５下的联机帮助系统的基本原则及使用Ｈｅｌｐ开发工具的一些技巧。     

高岭土深加工产品开发

当前世界上煅烧高岭土产品已瞄准高档化、专用化、精细化和功能化，深加工系列产品已应用于高档汽车、船舶、乳胶、颜料、化工、造纸、涂料等方面。内蒙古自治区有丰富的高岭土资源，我们应依托优势资源，尽快掌握高新技术，开发高岭土系列产品，争取在较短的时间内在国内外激烈的市场竞争中立于不败之地，为自治区的经济繁荣起到积极的推动作用。     

Study of the liquefaction resistance of a saturated sand reinforced with Geosynthetics

This article presents various tests using a cyclic triaxial instrument, on samples of saturated Hostun RF sand, reinforced with circular sheets of geosynthetic material. Tests performed with different types of geosynthetics of different compressibility, rigidity and roughness characteristics indicate a significant increase in liquefaction resistance for samples reinforced with compressible, non-woven geotextiles. The undrained behaviour of saturated Hostun RF sand reinforced with non-woven geotextiles is analysed on the basis of different test series. This analysis highlights the influence of reinforcement compressibility on interstitial pressure distribution in the sample, thus showing the role of this type of inclusion in the increase in liquefaction resistance.     

Measurement and research method of metallogenic depths of Jiaojia orefield and Linglong orefield Shandong Province, China

Taking the contribution of the tectonic force to the total hydrostatic pressure into account, the author puts forward a new method on the calculation of the depth of petrogenesis and metallogenesis which is summarized as follows: first the tectonic added hydrostatic pressured P_s is subtracted from the total hydrostatic pressure P, then using their difference P_r, according to the general method the depth of petrogenesis and metallogenesis can be determined in consideration of lateral constraint. By the new method the following data on the depths of the metallogenesis are obtained: 2 243.6 m (No. I and No. II veins with metallogenic epoch of 105 Ma) and 1 632. 38 m (No. III vein with 105 Ma) for Jiaojia orefield, and 3 454.97 m (NE-trending zone with 213.2 Ma), 1 902.79 III (ENE-trending zone with 100.28 Ma), 1 090.97 m (NE-trending zone with 80.67 Ma) and 720.55 m (NNE-trending zone with 71.86 Ma) for Linglong orefield. Project supported by the Foundation of the State Planning Commission, China and the Foundation of the State Science and Technology Commission, China.     

Conductivity of NaCl solution at 0.4–5.0 GPa and 25–500 °C

NaCI-H₂O is the most fundamental ternary system in geology. Until now, the measurements of electrical conductivity of NaCl solutions are still little at high pressures (> O.5 GPa) We measured the conductivity of 0.01 m NaCl solution at 0.4–5.0 GPa and 25-500°C. The results are consistent with that of Quist and Marshall (1968) at 0.4 GPa. The conductivity of NaCl solution increases with increasing temperature. The results also show that the conductivity of NaCl solution changes little with increasing pressure below 1.5 GPa and changes rapidly with increasing pressure above 1.5 GPa. The rapid increase of the conductivity of NaCl solution may play an important role in many geological processes (such as the genesis of ore deposits under hydrothermal condition) and other fields. Project supported by the National Natural Science Foundation of China.     

Crustal structure of Dabieshan orogenic belt

The crustal structures ofP velocity and density on the deep seismic sounding profile across the Ilabieshan orogenic belt are presented. There is a 5-km-thick crustal “root” between the Yuexi and Xiaotian where the elevation is highest on the profile. An apparent Moho offset of 4. 5 km beneath the Xiaotian-Mozitan fault marks the paleo-suture of the Triassic collision. A high-velocity anomaly zone at the depth below 3 km beneath the ultra-high pressure (UHP) zone may be correlated to the higher content of UHP metamorphic rocks. Project supported by the National Natural Science Foundation of China and the Joint Earthquake Science Foundation.