Simulation of wave power devices

Classical frequency and time domain models of a single degree of freedom wave power device are presented. In the time domain, a convolution integral is conventionally used to represent the fluid dynamic radiation force, characterised by added mass and damping in the frequency domain. This integral is replaced by an approximate ordinary differential equation (ODE) model which is faster and more convenient in simulations. A time domain model of the fluid dynamics of an oscillating water column (OWC) device is derived to illustrate the technique. Digital simulations of the OWC are used to compare the accuracy of the classical and ODE models. The simulation of the ODE model runs about six times as fast as the classical model based on convolution, yet characterises the fluid dynamics accurately.     

气动式波浪发电透平的设计模型

分析了气动式波浪发电透平的特点、运行环境以及透平与振荡气流之间的相互作用过程,提出了描述透平稳态特性和动态特性的参数以及描述透平运动性能的特性曲线,推导得出透平的稳态最佳工作点,最后提出了透平的匹配设计方法。该设计模型的建立,对波浪透平的研究和设计具有较重要的指导意义     

要重视海岸地区观赏植物资源的开发

列举了海岸地区常见的观赏植物群落,阐述了海岸地区观赏植物资源,对滨海旅游业如何利用海岸地区观赏植物资源提出了建议。     

连云港核电站厂址海域1939年风暴潮水位的确定

在新建滨海工程时往往遇到历史上的最高潮位资料不详,不满足设计计算的需求,这就需要通过现场调查找到当年大潮的蛛丝马迹来反算当年的潮高,而这一方法又往往由于高潮发生的年代久远,证据混乱,互相矛盾而造成结论不可信。用数学手段对工程海域历史上的大潮过程进行模拟,从而确认调查结论的可信程度是解决上述问题的一个有效的手段。本文是一个成功运用上述方法确定历史最高水位实例。     

ISO9000质量体系标准与HAF0400在核电海域工程设计中的运用

本文是作者结合核电海域工程设计任务的体会,将ＩＳＯ９０００ 系列标准与核安全法规（ＨＡＦ０４００）在工程中相结合,建立一个既符合ＩＳＯ９０００ 标准又能满足法规要求的质量保证体系。     

极区冰基拖曳式海洋剖面浮标系统低功耗设计与实现

针对极区冰基拖曳式海洋剖面浮标长期稳定获取极区水文和气象数据的工作需求,进行了浮标系统的低功耗方案设计。该方案基于超低功耗51系列微处理器,根据最低功耗工作模式与最短工作时间原则,采用高效的电源管理机制对浮标系统各个部分的能量消耗进行合理的分配与管理,并应用了Argos卫星通讯模块ARGOS-3 PMT-RFM的BPSK调制低速数据传输模式,可有效降低浮标系统的整体能耗。该浮标在北极冰站上长达1年的运行情况表明该系统工作稳定,所采用的低功耗能量管理方案实现了浮标系统长期连续观测的需求。该浮标的成功试验和推广应用有助于极地研究人员更准确地分析海冰变化过程。     

Performance investigation of a two-raft-type wave energy converter with hydraulic power take-off unit

Raft-type wave energy converter (WEC) is a multi-mode wave energy conversion device, using the relative pitch motion to drive its hydraulic power take-off (PTO) units for capturing energy from the ocean waves. The hydraulic PTO unit as its energy conversion module plays a significant role in storing large qualities of energy and making the output power smooth. However, most of the previous investigations on the raft-type WECs treat the hydraulic PTO unit as a linear PTO unit and do not consider the dynamics of the hydraulic circuit and components in their investigations. This paper is related to a two-raft-type WEC consisting of two hinged rafts and a hydraulic PTO unit. The aim of this paper is to make an understanding of the dynamics of the hydraulic PTO unit and how these affect the performance of the two-raft-type WEC. Therefore, a combined hydrodynamic and hydraulic PTO unit model is proposed to investigate and optimize the performance of the two-raft-type WEC; and based on the simulation of the combined model, the relationships between the optimal power capture ability, the optimal magnitude of the hydraulic PTO force and the wave states are numerically revealed. Results show that an approximately square wave type hydraulic PTO force is produced by the hydraulic PTO unit, which causes the performance of the two-raft-type WEC not to be sinusoidal and the energy capturing manner different from that of the device using a linear PTO unit; moreover, there is an optimal magnitude of the hydraulic PTO force for obtaining an optimal power capture ability, which can be achieved by adjusting the parameters of the hydraulic PTO unit; in regular waves, the optimal power capture ability as well as the optimal magnitude of the hydraulic PTO force normalized by the wave height presents little relationship with the wave height, mainly depends on the wave period; in irregular waves, the trends of the optimal power capture ability and the normalized optimal magnitude of the hydraulic PTO force against the peak wave periods at different significant wave heights are generally identical and show a good correlation. All means that the hydraulic PTO unit of the two-raft-type WEC can be tuned to the wave states, and these would provide a valuable guidance for the optimal design of its hydraulic PTO unit.     

基于网络控制板的地震台站远程电源监控系统

针对无人值守地震台站逐年增加,运行维护模式不佳的现状,设计一种远程电源监控系统,采用远程电源控制模块,设计软件通过TCP/IP协议,在仪器出现死机时,远程实现设备的断电重启。本文对该系统的设计思路、硬件构成进行描述,并简要介绍软件功能设计、监控告警以及该系统在无人值守台站的应用。实践证明,该系统可有效解决因仪器死机造成的观测数据缺记,为地震专业设备的可靠运行和及时维护提供依据与保障,为今后地震台站,特别是无人值守台站的维护提供借鉴。