极区冰基拖曳式海洋剖面浮标系统低功耗设计与实现

针对极区冰基拖曳式海洋剖面浮标长期稳定获取极区水文和气象数据的工作需求,进行了浮标系统的低功耗方案设计。该方案基于超低功耗51系列微处理器,根据最低功耗工作模式与最短工作时间原则,采用高效的电源管理机制对浮标系统各个部分的能量消耗进行合理的分配与管理,并应用了Argos卫星通讯模块ARGOS-3 PMT-RFM的BPSK调制低速数据传输模式,可有效降低浮标系统的整体能耗。该浮标在北极冰站上长达1年的运行情况表明该系统工作稳定,所采用的低功耗能量管理方案实现了浮标系统长期连续观测的需求。该浮标的成功试验和推广应用有助于极地研究人员更准确地分析海冰变化过程。     

Performance investigation of a two-raft-type wave energy converter with hydraulic power take-off unit

Raft-type wave energy converter (WEC) is a multi-mode wave energy conversion device, using the relative pitch motion to drive its hydraulic power take-off (PTO) units for capturing energy from the ocean waves. The hydraulic PTO unit as its energy conversion module plays a significant role in storing large qualities of energy and making the output power smooth. However, most of the previous investigations on the raft-type WECs treat the hydraulic PTO unit as a linear PTO unit and do not consider the dynamics of the hydraulic circuit and components in their investigations. This paper is related to a two-raft-type WEC consisting of two hinged rafts and a hydraulic PTO unit. The aim of this paper is to make an understanding of the dynamics of the hydraulic PTO unit and how these affect the performance of the two-raft-type WEC. Therefore, a combined hydrodynamic and hydraulic PTO unit model is proposed to investigate and optimize the performance of the two-raft-type WEC; and based on the simulation of the combined model, the relationships between the optimal power capture ability, the optimal magnitude of the hydraulic PTO force and the wave states are numerically revealed. Results show that an approximately square wave type hydraulic PTO force is produced by the hydraulic PTO unit, which causes the performance of the two-raft-type WEC not to be sinusoidal and the energy capturing manner different from that of the device using a linear PTO unit; moreover, there is an optimal magnitude of the hydraulic PTO force for obtaining an optimal power capture ability, which can be achieved by adjusting the parameters of the hydraulic PTO unit; in regular waves, the optimal power capture ability as well as the optimal magnitude of the hydraulic PTO force normalized by the wave height presents little relationship with the wave height, mainly depends on the wave period; in irregular waves, the trends of the optimal power capture ability and the normalized optimal magnitude of the hydraulic PTO force against the peak wave periods at different significant wave heights are generally identical and show a good correlation. All means that the hydraulic PTO unit of the two-raft-type WEC can be tuned to the wave states, and these would provide a valuable guidance for the optimal design of its hydraulic PTO unit.     

Distribution of eddy scales for wave current combined flow

This paper illustrates the modulation of the eddy scale distribution due to superimposition of surface wave on only current flow. Time series data of three-dimensional velocity components were measured in a laboratory flume by a three-dimensional (3D) 16-MHz micro-acoustic Doppler velocimeter (Micro-ADV). The velocity time series of only current case and waves following the current were analysed to obtain the phase-averaged mean velocities, turbulent intensities, and Reynolds stress. The probability density function of phase-averaged stream-wise and vertical velocity fluctuations showed bimodal oscillations towards the free surface for higher frequency surface waves. It was revealed that surface waves along the current effectively decrease the intermittency of turbulence of the only current flow. Surface wave changed the intermittent structure of only current flow by modulation of the energy cascade mechanism of the only current flow by introduction of wave induced length scales. Also the scale of the finer dissipative eddies were prominently enhanced by the increase in surface wave frequency. Wavelet analysis of time series of velocity signals provided information on the eddy scale and their frequency of occurrence. It was found that the large eddies are carried by the crest regions of the progressive wave while the small scale eddies are carried by the trough regions.     

改进型中心管模型能量转换性能试验及样机设计

为了提高中心管振荡水柱波浪能利用技术能量转换效率,基于新的认识和目前常用的2.4米导航灯标,对中心管尾部设计了三种模型并在造波水槽中进行能量转换性能试验。试验结果表明:直管型中心管俘获宽度比最高达到了70.25%,但通频带宽度窄;加长喇叭口型中心管略好于喇叭口型中心管;在喷咀比为0.02条件下,加长喇叭口型中心管浮体有较高双峰俘获宽度比,波峰为40.0%,波谷为31.6%,通频带宽,为随机波下高效转换创造了条件。最高俘获宽度比和双峰通频带特性实验数据结果都优于历史文献值。根据试验数据对一些适合小型海洋仪器供电的样机进行了设计,设计的样机具有较高的性价比。     

海洋产业结构变动对海洋经济效率影响研究

产业结构变动对经济增长影响已经得到了现代经济增长理论的肯定,但是产业结构变动对经济增长效率的影响一直是学术界没有解决的问题。目前中国已经进入了中等收入国家,粗放式增长逐渐结束,集约式增长越来越受到重视。文章基于海洋产业,研究了海洋产业结构变动对经济增长效率的影响,将海洋产业结构变动具体量化,分为海洋产业结构高级化和合理化;其次运用海洋产业全要素生产率来衡量海洋经济增长效率,通过从海洋生产函数中剔除初级要素带来的海洋经济增长效率得出海洋产业全要素生产率;同时计算出海洋产业劳动和资本的生产效率;最后收集了1996—2015年全国沿海11个省、市、自治区的数据,运用混合面板数据模型来研究海洋产业结构高级化和合理化对海洋经济增长效率的影响。研究发现海洋产业结构合理化和高级化对海洋经济增长具有正面影响,对于未来发展海洋经济提出了提高海洋产业技术来提高海洋产业结构优化,从而使得海洋经济发展走上集约式增长之路。     

双向直驱式潮流能发电轮机性能实验研究

针对潮流能双向来流的特点及当前潮流能发电轮机的研究现状和存在的问题,提出了一种新型的双向直驱式发电轮机。叶片基本翼型为S型,并对其进行受力分析,得到相应的计算公式,结合叶片翼型厚度和形状约束,求解出各个截面的形状,并三维建模形成一种新型"S"翼型轮机。轮机两端安装具有防水性能的永磁发电机,外侧增设双向导流罩,构成双向直驱式发电轮机装置模型。在水槽实验中,首先找出不同的模拟流速下获取功率的最佳负载阻值,在此基础上收集了转速及功率数据,绘制尖速比-获能系数关系曲线图和流速—获能系数关系曲线图,可以论证尖速比的取值对获取最佳功率的重要性,同时该翼型轮机具有良好的空载启动性能及双向吸收来流的能力,2 m/s流速下获能效率最大值接近40%。     

A Study of the Stability Properties in Simulation of Wave Propagation with SPH Method

When ordinary Smoothed Particle Hydrodynamics (SPH) method is used to simulate wave propagation in a wave tank, it is usually observed that the wave height decays and the wave length elongates along the direction of wave propagation. Accompanied with this phenomenon, the pressure under water decays either and shows a big oscillation simultaneously. The reason is the natural potential tensile instability of modeling water motion with ordinary SPH which is caused by particle negative stress in the computation. To deal with the problems, a new sextic kernel function is proposed to reduce this instability. An appropriate smooth length is given and its computation criterion is also suggested. At the same time, a new kind dynamic boundary condition is introduced. Based on these improvements, the new SPH method named stability improved SPH (SISPH) can simulate the wave propagation well. Both the water surface and pressure can be well expressed and the oscillation of pressure is nearly eliminated. Compared with other improved methods, SISPH can truly reveal the physical reality without bringing some new problems in a simple way.     

Prediction of one-dimensional compression behavior of Nansha clay using fractional derivatives

Nansha clay is an interactive marine and terrestrial deposited soft clay that is widely spread in Guangzhou, Pearl River Delta, China. To avoid excessive settlement after construction, there is a need for better quantifying the time-dependent deformation of the soft clay. This paper presents a preliminary study to predict the one-dimensional compression of Nansha clay using fractional derivatives. A fractional Merchant model was introduced to describe the time-dependent settlement, and analytical solutions were obtained in terms of the Mittag-Leffler function. The oedometer test results were presented to validate this model. Compared with classical rheological models, the fractional derivative-based model enabled close estimation of the one-dimensional compression with fewer parameters. The meaning of the order of fractional derivative and its relationship with the clay physical properties were explored. It shows that a smaller value of this order corresponded to a higher coefficient of consolidation and a lower coefficient of secondary consolidation. The amplitude of both the primary and secondary consolidation of clay may be estimated quantitatively by the order of fractional derivative. Taken together, these results may open up new avenues for theoretical and empirical modeling of rheological phenomena in clay using fractional derivatives.     

基于主体功能区视角下新疆民生质量的区域差异及影响因素

主体功能区定位决定区域的发展方向和重点,各类型区逐步实现公共服务均等化,民生质量发展表现出一定的区域差异。本文基于新疆主体功能区规划和民生发展实际状况构建民生质量评价指标体系,运用熵值法计算2005 年和2014 年各主体功能类型区的民生质量,并结合差异贡献率动态分析各类型区民生差异的影响因素。结果表明：（1）各类型区民生质量存在显著差异,重点开发区最优,重点生态功能区最低;尤其是收入与消费、文化与教育和生态与环境方面水平差距日益拉大。（2）各类型区民生质量发展侧重点各有不同,在文化与教育方面呈现水平共同下滑趋势。（3）各因素对于影响类型区民生质量差异的作用效果不同,收入、消费、交通设施、信息化、医疗卫生和生态平衡水平等成为拉大民生差距的主要因素。（4）收入消费水平和交通设施水平对拉大类型区民生质量差距的强度最为突出,生态平衡水平和信息化水平对拉大差距的程度逐渐加强,社会保障水平和教育水平对缩小差距的作用最强。基于上述分析,对缩小新疆主体功能区民生发展差距,保障基本公共服务均等化提出相应对策建议。     

Ecological-Living-Productive Land Classification System in China

Rapid economic development, industrialization, and urbanization aggravates the tense relationship between human beings and the land. With multiple demands for food security, ecological protection and economic development, frequent conflicts and competition occur between multiple different functional land types. The current land use classification system focuses on the productive and living functions of land, but gives little consideration to ecological functions. This study builds a national Ecological-Living-Productive Land Classification System based on land functions emphasizing the concept and position of ecological land. So-called ecological land uses are types of land use regulating, maintaining and protecting ecological security. The new land classification is more flexible for overall planning purposes and for making arrangements for ecological, living and productive land spaces. The Ecological-Living-Productive Land Classification System includes three levels. The first level has four major types: ecological land, ecological-productive land, productive-ecological land, and living-productive land. The second level subdivides the major types into 15 functional land categories, including major ecological regulation land, common ecological regulation land, and ecological conservation land for ecological lands; pasture land, timber land and aquaculture land for ecological-productive lands; arable land and orchard for productive-ecological lands; and urban built-up area, rural living land, and industrial land for living-productive lands. The third level is based on land cover types. Based on multiple data sources, and using a strategy of zoning and re-classification, we extracted the spatial distribution of ecological-living-productive lands on a national scale. The areas of ecological land, ecological-productive land, productive land, and living-productive land area are 6,037,000 km², 1,353,800 km², 2,001,900 km² and 207,300 km², respectively; accounting for 62.89%, 14.10%, 20.85% and 2.16% of total area, respectively. For the second-level classification, the area of ecological conservation land is the largest, accounting for 20.17% of the total area. Ecological land is located mainly in central and western China. Ecological-productive land is distributed in various areas throughout the country, and productive-ecological land and living-productive land are concentrated in eastern China.