Development and validation of a metallic haunch seismic retrofit solution for existing under‐designed RC frame buildings

The feasibility and efficiency of a seismic retrofit solution for existing reinforced concrete frame systems, designed before the introduction of modern seismic‐oriented design codes in the mid 1970s, is conceptually presented and experimentally investigated. A diagonal metallic haunch system is introduced at the beam–column connections to protect the joint panel zone from extensive damage and brittle shear mechanisms, while inverting the hierarchy of strength within the beam–column subassemblies and forming a plastic hinge in the beam. A complete step‐by‐step design procedure is suggested for the proposed retrofit strategy to achieve the desired reversal of strength hierarchy. Analytical formulations of the internal force flow at the beam–column‐joint level are derived for the retrofitted joints. The study is particularly focused on exterior beam–column joints, since it is recognized that they are the most vulnerable, due to their lack of a reliable joint shear transfer mechanism. Results from an experimental program carried out to validate the concept and the design procedure are also presented. The program consisted of quasi‐static cyclic tests on four exterior, ? scaled, beam–column joint subassemblies, typical of pre‐1970 construction practice using plain round bars with end‐hooks, with limited joint transverse reinforcement and detailed without capacity design considerations. The first (control specimen) emulated the as‐built connection while the three others incorporated the proposed retrofitted configurations. The experimental results demonstrated the effectiveness of the proposed solution for upgrading non‐seismically designed RC frames and also confirmed the applicability of the proposed design procedure and of the analytical derivations. Copyright © 2006 John Wiley & Sons, Ltd.     

Approximate incremental dynamic analysis using the modal pushover analysis procedure

Incremental dynamic analysis (IDA)—a procedure developed for accurate estimation of seismic demand and capacity of structures—requires non‐linear response history analysis of the structure for an ensemble of ground motions, each scaled to many intensity levels, selected to cover the entire range of structural response—all the way from elastic behaviour to global dynamic instability. Recognizing that IDA of practical structures is computationally extremely demanding, an approximate procedure based on the modal pushover analysis procedure is developed. Presented are the IDA curves and limit state capacities for the SAC‐Los Angeles 3‐, 9‐, and 20‐storey buildings computed by the exact and approximate procedures for an ensemble of 20 ground motions. These results demonstrate that the MPA‐based approximate procedure reduces the computational effort by a factor of 30 (for the 9‐storey building), at the same time providing results to a useful degree of accuracy over the entire range of responses—all the way from elastic behaviour to global dynamic instability—provided a proper hysteretic model is selected for modal SDF systems. The accuracy of the approximate procedure does not deteriorate for 9‐ and 20‐storey buildings, although their dynamics is more complex, involving several ‘modes’ of vibration. For all three buildings, the accuracy of the MPA‐based approximate procedure is also satisfactory for estimating the structural capacities for the limit states of immediate occupancy, collapse prevention, and global dynamic instability. Copyright © 2006 John Wiley & Sons, Ltd.     

Transient analysis of wave propagation in non‐homogeneous elastic unbounded domains by using the scaled boundary finite‐element method

The scaled boundary finite‐element method has been developed for the dynamic analysis of unbounded domains. In this method only the boundary is discretized resulting in a reduction of the spatial dimension by one. Like the finite‐element method no fundamental solution is required. This paper extends the scaled boundary finite‐element method to simulate the transient response of non‐homogeneous unbounded domains with the elasticity modulus and mass density varying as power functions of spatial coordinates. To reduce the number of degrees of freedom and the computational cost, the technique of reduced set of base functions is applied. The scaled boundary finite‐element equation for an unbounded domain is reformulated in generalized coordinates. The resulting acceleration unit‐impulse response matrix is obtained and assembled with the equation of motion of standard finite elements. Numerical examples of non‐homogeneous isotropic and transversely isotropic unbounded domains demonstrate the accuracy of the scaled boundary finite‐element method. Copyright © 2006 John Wiley & Sons, Ltd.     

Yielding oscillator subjected to simple pulse waveforms: numerical analysis & closed‐form solutions

Numerical and analytical solutions are presented for the elastic and inelastic response of single‐degree‐of‐freedom yielding oscillators to idealized ground acceleration pulses. These motions are typical of near‐fault earthquake recordings generated by forward rupture directivity and may inflict damage in the absence of substantial structural strength and ductility capacity. Four basic pulse waveforms are examined: (1) triangular; (2) sinusoidal; (3) exponential; and (4) rectangular. In the first part of the article, a numerical study is presented of the effect of oscillator period, strength, damping, post‐yielding stiffness and number of excitation cycles, on inelastic response. Results are presented in the form of dimensionless graphs and regression formulas that elucidate the salient features of the problem. It is shown that conventional R–µ relations may significantly underestimate ductility demand imposed by near‐fault motions. The second part of the article concentrates on elastic‐perfectly plastic oscillators. Closed‐form solutions are derived for post‐yielding response and associated ductility demand. It is shown that all three ground motion histories (i.e. acceleration, velocity, and displacement) control oscillator response—contrary to the widespread view that ground velocity alone is of leading importance. The derived solutions provide insight on the physics of inelastic response, which is often obscured by the complexity of numerical algorithms and actual earthquake motions. The model is evaluated against numerical results from near‐field recordings. A case study is presented. Copyright © 2006 John Wiley & Sons, Ltd.     

内蒙古大青山北石兰哈达石英闪长岩构造环境讨论

内蒙古大青山北石兰哈达地区的晚古生代黑云石英闪长岩,1∶20万区域地质调查时将其置于华力西中期第二次侵入体(δο42(2)),现经岩石学、地球化学、同位素年代学研究,认为该石英闪长岩为早二叠世岩浆活动的产物。岩石具高铝、高钾、高钙的特点,A/CNK<1.1,σ在2.05～2.83之间,为高钾钙碱性岩,属I型花岗岩类,产于碰撞后的抬升构造环境。岩石稀土总量偏低,LREE富集,δEu=0.8～1.0,稀土曲线呈右倾平滑型,其物质来源很可能是源于软流圈的玄武质岩浆与元古宙地壳物质混合作用的结果。     

国有企业法律风险防范机制的建立与健全

随着国有企业现代企业制度的建立，我国各项法律法规也日益完善。企业如何实现依法经营、强化内部管理，运用法律手段化解经营风险，是当前国有企业亟待解决的问题。国务院国资委下发的《中央企业重大法律纠纷案件管理暂行办法》要求中央企业逐步建立法律风险防范机制，设立企业法律顾问，把依法经营纳入企业管理的各个环节。分析了同有企业面临的法律风险现状和重要性之后，提出了建立法律风险防范机制的几项措施手段，以便为国企的健康发展保驾护航。     

Analysis of the impact of conservation measures on stream flow regime in catchments of the Loess Plateau,China

Catchments in the Loess Plateau have been under the influence of human activities for centuries. In the last four decades, soil conservation measures have accelerated and intensified. These measures were designed to reduce soil erosion, improve agricultural productivity, and enhance environmental quality. It is important to evaluate the effects of these measures on hydrology in order to develop sustainable catchment management plans in the region. This study evaluated changes in stream flow data for four selected catchments in the Loess Plateau following large‐scale soil conservation measures. The non‐parametric Mann–Kendall test was used to identify trends in annual stream flow and the results showed significant downward trends in three of the four catchments. The Pettitt test indicated that a change point occurred in 1978 in these three catchments. Annual precipitation in all the catchments showed no significant trend during the period of record. Comparison of daily flow duration curves for two 20‐year periods (1957–1978) and (1979–2003) showed significant changes in stream flow regime. Reduction in most percentile flows varied between 20 and 45%, and the reduction in low flows was greatest. Overall, the reductions in daily flow were increasing with time, with significant changes occurring in the 1990s. However, it is not clear whether these catchments have seen the full effects of the soil conservation measures, so the results of this study might underestimate the final impact of soil conservation on stream flow regime. Copyright © 2007 John Wiley & Sons, Ltd.     

Genesis of the Changba–Lijiagou Giant Pb-Zn Deposit, West Qinling, Central China: Constraints from S-Pb-C-O isotopes

The extensive Changba-Lijiagou Pb-Zn deposit is located in the north of the Xihe–Chengxian ore cluster in West Qinling. The ore bodies are mainly hosted in the marble, dolomitic marble and biotite-calcite-quartz schist of the Middle Devonian Anjiacha Formation, and are structurally controlled by the fault and anticline. The ore-forming process can be divided into three main stages, based on field geological features and mineral assemblages. The mineral assemblages of hydrothermal stage I are pale-yellow coarse grain, low Fe sphalerite, pyrite with pits, barite and biotite. The mineral assemblages of hydrothermal stage II are black-brown cryptocrystalline, high Fe shalerite, pyrite without pits, marcasite or arsenopyrite replace the pyrite with pits, K-feldspar. The features of hydrothermal stage III are calcite-quartz-sulfide vein cutting the laminated, banded ore body. Forty-two sulfur isotope analyses, twenty-five lead isotope analyses and nineteen carbon and oxygen isotope analyses were determined on sphalerite, pyrite, galena and calcite. The δ34 S values of stage I(20.3 to 29.0‰) are consistent with the δ34 S of sulfate(barite) in the stratum. Combined with geological feature, inclusion characteristics and EPMA data, we propose that TSR has played a key role in the formation of the sulfides in stage I. The δ34 S values of stage II sphalerite and pyrite(15.1 to 23.0‰) are between sulfides in the host rock, magmatic sulfur and the sulfate(barite) in the stratum. This result suggests that multiple S reservoirs were the sources for S2-in stage II. The δ34 S values of stage III(13.1 to 22‰) combined with the structure of the geological and mineral features suggest a magmatic hydrothermal origin of the mineralization. The lead isotope compositions of the sulfides have 206 Pb/204 Pb ranging from 17.9480 to 17.9782, 207 Pb/204 Pb ranging from 15.611 to 15.622, and 208 Pb/204 Pb ranging from 38.1368 to 38.1691 in the three ore-forming stages. The narrow and symmetric distributions of the lead isotope values reflect homogenization of granite and mantle sources before the Pb-Zn mineralization. The δ13 CPDB and δ18 OSMOW values of stage I range from-0.1 to 2.4‰ and from 18.8 to 21.7‰. The values and inclusion data indicate that the source of fluids in stage I was the dissolution of marine carbonate. The δ13 CPDB and δ18 OSMOW values of stage II range from-4 to 1‰ and from 12.3 to 20.3‰, suggesting multiple C-O reservoirs in the Changba deposit and the addition of mantle-source fluid to the system. The values in stage III are-3.1‰ and 19.7‰, respectively. We infer that the process of mineralization involved evaporitic salt and sedimentary organic-bearing units interacting through thermochemical sulfate reduction through the isotopic, mineralogy and inclusion evidences. Subsequently, the geology feature, mineral assemblages, EPMA data and isotopic values support the conclusion that the ore-forming hydrothermal fluids were mixed with magmatic hydrothermal fluids and forming the massive dark sphalerite, then yielding the calcite-quartz-sulfide vein ore type at the last stage. The genesis of this ore deposit was epigenetic rather than the previously-proposed sedimentary-exhalative(SEDEX) type.     

陕西略阳铜厂铜矿成矿时代及地质意义

根据铜厂铜矿床辉钼矿ＲｅＯｓ同位素模式年龄和黄铜矿ＲｂＳｒ同位素等时线年龄分别为８８９Ｍａ和３５９Ｍａ,并依据其地质特征和与铜厂岩体之间时空关系,认为早期铜矿化发生在８８９Ｍａ左右,与铜厂岩体岩浆期后热液有关;晚期铜矿化则发生在３５９Ｍａ左右,是伴随区域动力变质作用发生的;其矿质来源研究表明既有来自围岩的,又有来自岩体本身的;包裹体测温资料表明成矿温度集中在两个区间：高温大于３００℃,低温１５０～２００℃。该矿床为多期、复源、多种成矿作用叠加复合的产物。     

后压浆方案的技术可行性论证

从地层选择、效果预测、经济分析和施工应用４个方面对钻孔灌注桩后压浆方案进行可行性论证,并对承载力增幅进行了分析。