Diversity patterns of free‐living marine nematodes in the southwest continental shelf off Bay of Bengal and their link to abiotic variables

Marine sediments in continental shelf ecosystems harbor a rich biodiversity of benthic communities. In this study, the spatial and temporal diversity and community assemblages of free‐living marine nematodes were studied by sampling at six depths and over 3 years from the southwest continental shelf off Bay of Bengal, one of the least explored tropical shelf ecosystems. The dominant marine nematode species were related with abiotic variables as part of this study. The effects of sediment granulometry generally decreased with increasing depth and the highest nematode density and species diversity were recorded on coarse sand (shallower depths). Multivariate analysis of the nematode community data showed that community structure differed significantly among depths as well as among years. Statistical analyses showed significant correlations between the nematode community and abiotic variables. Sediment texture, organic matter, water pressure and depth profile were crucial factors for determining diversity, vertical profile and feeding types of the nematode community. Other environmental factors, including anthropogenic pressure, did not have an effect on nematode diversity except for the presence of some tolerant species (Metachromadora spp., Sabatieria spp. and Siplophorella sp.). This study represents a baseline of knowledge of free‐living marine nematode communities that can be used in the future to compare nematode assemblages from temperate shelf ecosystems.     

日本囊对虾(Marsupenaeus japonicus)秋繁仔虾形态表型与抗流性能间的相关性

于水温(18.0±1.0)°C、盐度20、pH 8.1±0.2条件下,以水流为胁迫因子(时长1min),以日本囊对虾秋繁同生群仔虾[总长(7.643±0.639)mm]为实验对象,以溢水口(实验初始时刻仔虾放置处)为起点,按等距离间距法将自制的水流测定装置(总长1m)依次划分为A(0—25cm)、B(25—50cm)、C(50—75cm)、D(75—100cm)和E(100cm)等五个区段,在确认实验终了时刻分布于A区段内仔虾数量占实验仔虾总数5%的水流速度为0.823cm/s后,以此为实验流速,借助显微扫描像素测量技术和多元分析方法定量研究了A、B、C、D、E实验群体(依次为实验终止时刻分布于A、B、C、D、E区段内的仔虾)个体间形态比例性状间的差异。结果表明:(1)在所涉15项形态测量指标中,各实验群体间均无显著差异(P0.05)的形态性状共计8项,依次为X_4(眼径)、X_5(头胸甲长)、X_6(头胸甲高)、X_7(第一腹节长)、X_8(第二腹节长)、X_9(第三腹节长)、X_~(10)(第四腹节长)和X_14(腹节高);(2)在所涉17项形态比例指标中,实验群体间均无显著差异(P0.05)的形态比例性状共计7项,依次为C_2(额剑长/总长)、C_9(第五腹节长/总长)、C_(10)(尾节长/总长)、C_(11)(尾扇长/总长)、C_(15)(头胸甲高/头胸甲长)、C_(16)(腹节高/第一腹节长)和C_(17)(尾节高/尾节长);(3)经主成分分析,提取到的5个特征值均大于1的主成分,累计贡献率达80.795%,其中第1主成分39.561%,其载荷绝对值大于0.5的主要影响变量占形态比例性状总数的47.059%;(4)将A实验群体定义为水流胁迫处理选留群,B、C、D、E实验群体统归为水流胁迫处理淘汰群。采用逐步判别法,以判别贡献率较大的C_1(第一触角柄长/总长)、C3(眼径/总长)、C7(第三腹节长/总长)、C13(额剑长/头胸甲长)为自变量,所建的Fisher分类函数方程组可较清晰地区分淘汰群和选留群个体,其中选留群的判别准确率P_1、P_2分别为98%和84.85%,淘汰群的判别准确率P_1、P_2分别为82.25%和97.63%,两者综合判别准确率为90.12%。综上可知,借助形态表型分型可实现日本囊对虾仔虾不同抗流性能群体间的筛选。     

Molybdenum Mass Fractions and Isotopic Compositions of International Geological Reference Materials

The double‐spike method with multi‐collector inductively coupled plasma‐mass spectrometry was used to measure the Mo mass fractions and isotopic compositions of a set of geological reference materials including the mineral molybdenite, seawater, coral, as well as igneous and sedimentary rocks. The long‐term reproducibility of the Mo isotopic measurements, based on two‐year analyses of NIST SRM 3134 reference solutions and seawater samples, was ≤ 0.07‰ (two standard deviations, 2s, n = 167) for δ^98/95Mo. Accuracy was evaluated by analyses of Atlantic seawater, which yielded a mean δ^98/95Mo of 2.03 ± 0.06‰ (2s, n = 30, relative to NIST SRM 3134 = 0‰) and mass fraction of 0.0104 ± 0.0006 μg g^?1 (2s, n = 30), which is indistinguishable from seawater samples taken world‐wide and measured in other laboratories. The comprehensive data set presented in this study serves as a reference for quality assurance and interlaboratory comparison of high‐precision Mo mass fractions and isotopic compositions.     

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).     

Identification of Uranyl Minerals Using Oxygen K‐Edge X‐Ray Absorption Spectroscopy

Although most of the world's uranium exists as pitchblende or uraninite, this mineral can be weathered to a great variety of secondary uranium minerals, most containing the uranyl cation. Anthropogenic uranium compounds can also react in the environment, leading to spatial–chemical alterations that could be useful for nuclear forensics analyses. Soft X‐ray absorption spectroscopy (XAS) has the advantages of being non‐destructive, element‐specific and sensitive to electronic and physical structure. The soft X‐ray probe can also be focused to a spot size on the order of tens of nanometres, providing chemical information with high spatial resolution. However, before XAS can be applied at high spatial resolution, it is necessary to find spectroscopic signatures for a variety of uranium compounds in the soft X‐ray spectral region. To that end, we collected the near edge X‐ray absorption fine structure (NEXAFS) spectra of a variety of common uranyl‐bearing minerals, including uranyl carbonates, oxyhydroxides, phosphates and silicates. We find that uranyl compounds can be distinguished by class (carbonate, oxyhydroxide, phosphate or silicate) based on their oxygen K‐edge absorption spectra. This work establishes a database of reference spectra for future spatially resolved analyses. We proceed to show scanning X‐ray transmission microscopy (STXM) data from a schoepite particle in the presence of an unknown contaminant.     

High Precision Sr‐Nd‐Hf‐Pb Isotopic Compositions of USGS Reference Material BCR‐2

The Lamont‐Doherty Earth Observatory radiogenic isotope group has been systematically measuring Sr‐Nd‐Pb‐Hf isotopes of USGS reference material BCR‐2 (Columbia River Basalt 2), as a chemical processing and instrumental quality control monitor for isotopic measurements. BCR‐2 is now a widely used geochemical inter‐laboratory reference material (RM), with its predecessor BCR‐1 no longer available. Recognising that precise and accurate data on RMs is important for ensuring analytical quality and for comparing data between different laboratories, we present a compilation of multiple digestions and analyses made on BCR‐2 during the first author's dissertation research. The best estimates of Sr, Nd and Hf isotope ratios and measurement reproducibilities, after filtering at the 2s level for outliers, were ⁸⁷Sr/⁸⁶Sr = 0.705000 ± 11 (2s, 16 ppm, n = 21, sixteen digestions, one outlier), ¹⁴³Nd/¹⁴⁴Nd = 0.512637 ± 13 (2s, 25 ppm, n = 27, thirteen digestions, one outlier) and ¹⁷⁶Hf/¹⁷⁷Hf = 0.282866 ± 11 (2s, 39 ppm, n = 25, thirteen digestions, no outliers). Mean Nd and Hf values were within error of those reported by Weis et al. (2006, 2007) in their studies of RMs; mean Sr values were just outside the 2s uncertainty range of both laboratories. Moreover, a survey of published Sr‐Nd‐Hf data shows that our results fall within the range of reported values, but with a smaller variability. Our Pb isotope results on acid leached BCR‐2 aliquots (n = 26, twelve digestions, two outliers) were ²⁰⁶Pb/²⁰⁴Pb = 18.8029 ± 10 (2s, 55 ppm), ²⁰⁷Pb/²⁰⁴Pb = 15.6239 ± 8 (2s, 52 ppm), ²⁰⁸Pb/²⁰⁴Pb = 38.8287 ± 25 (2s, 63 ppm). We confirm that unleached BCR‐2 powder is contaminated with Pb, and that sufficient leaching prior to digestion is required to achieve accurate values for the uncontaminated Pb isotopic compositions.     

An Alternative Protocol for Single Zircon Dissolution with Application to (U‐Th‐Sm)/He Thermochronometry

Zircon (U‐Th‐Sm)/He (ZHe) thermochronometry is a powerful tool that has been widely used in geology to constrain the exhumation histories of orogens. In this study, we present an alternative protocol for dissolving zircon grains for determination of parent nuclides. This new alkali fusion procedure developed at the SARM (Service d'Analyse des Roches et des Minéraux) in Nancy, France, is fast (requiring only 2 d, including cleaning steps) and offers several advantages over conventional methods by avoiding: (i) use of HF pressure dissolution and (ii) complete removing of grains from the metal microvials. After dissolution, U, Th and Sm were measured using an ICP‐MS. We tested the new procedure on two different ZHe reference materials, the Fish Canyon Tuff and Buluk Tuff; these provided precision values for ZHe‐age estimations of 9 and 6% (1s), respectively. In addition, using this method, zircons from the Buluk Tuff are shown to be chemically more homogenous and more suitable for assessing the uncertainty of the entire integrated procedure.     

Community‐Derived Standards for LA‐ICP‐MS U‐(Th‐)Pb Geochronology – Uncertainty Propagation,Age Interpretation and Data Reporting

The LA‐ICP‐MS U‐(Th‐)Pb geochronology international community has defined new standards for the determination of U‐(Th‐)Pb ages. A new workflow defines the appropriate propagation of uncertainties for these data, identifying random and systematic components. Only data with uncertainties relating to random error should be used in weighted mean calculations of population ages; uncertainty components for systematic errors are propagated after this stage, preventing their erroneous reduction. Following this improved uncertainty propagation protocol, data can be compared at different uncertainty levels to better resolve age differences. New reference values for commonly used zircon, monazite and titanite reference materials are defined (based on ID‐TIMS) after removing corrections for common lead and the effects of excess ²³⁰Th. These values more accurately reflect the material sampled during the determination of calibration factors by LA‐ICP‐MS analysis. Recommendations are made to graphically represent data only with uncertainty ellipses at 2s and to submit or cite validation data with sample data when submitting data for publication. New data‐reporting standards are defined to help improve the peer‐review process. With these improvements, LA‐ICP‐MS U‐(Th‐)Pb data can be considered more robust, accurate, better documented and quantified, directly contributing to their improved scientific interpretation.     

The Housing Market and Population Vulnerabilities: Perceptions in a Fordist and a Post‐Fordist Context

Drawing on qualitative interviews and participatory urban‐appraisal tools, this paper analyzes household perceptions on the five elements of Lawrence and Su‐Yeul's market‐led pluralism (M‐LP) framework (2008). It uses post‐Fordist Columbus, Ohio, and Fordist Milwaukee, Wisconsin, as testing grounds for these household perspectives. M‐LP suggests that at the center of contemporary housing market lie five elements: developers/builders who unveil new urban spaces with culturally open communities; lending agencies that offer affordable mortgages to all; real estate brokers/agents who have moved past discriminatory practices; consumers whose preferences emphasize class‐type elements; and communities that impose development agendas. While many felt that the housing market of the mid‐2000s was racially blind, race still played a crucial role in driving home‐buying decisions, especially in Milwaukee. Columbus respondents aligned more closely with M‐LP, putting greater emphasis on class, but they also used phrases and words to blur race and class distinction. Both metropolises, though, illustrated complex intertwining between class and culture.     

An Investigation of Digestion Methods for Trace Elements in Bauxite and Their Determination in Ten Bauxite Reference Materials Using Inductively Coupled Plasma‐Mass Spectrometry

Trace elements from samples of bauxite deposits can provide useful information relevant to the exploration of the ore‐forming process. Sample digestion is a fundamental and critical stage in the process of geochemical analysis, which enables the acquisition of accurate trace element data by ICP‐MS. However, the conventional bomb digestion method with HF/HNO₃ results in a significant loss of rare earth elements (REEs) due to the formation of insoluble AlF₃ precipitates during the digestion of bauxite samples. In this study, the digestion capability of the following methods was investigated: (a) ‘Mg‐addition’ bomb digestion, (b) NH₄HF₂ open vessel digestion and (c) NH₄F open vessel digestion. ‘Mg‐addition’ bomb digestion can effectively suppress the formation of AlF₃ and simultaneously ensure the complete decomposition of resistant minerals in bauxite samples. The addition of MgO to the bauxite samples resulted in (Mg + Ca)/Al ratios ≥ 1. However, adding a large amount of MgO leads to significant blank contamination for some transition elements (V, Cr, Ni and Zn). The NH₄HF₂ or NH₄F open vessel digestion methods can also completely digest resistant minerals in bauxite samples in a short period of time (5 hr). Unlike conventional bomb digestion with HF/HNO₃, the white precipitates and the semi‐transparent gels present in the NH₄HF₂ and NH₄F digestion methods could be efficiently dissolved by evaporation with HClO₄. Based on these three optimised digestion methods, thirty‐seven trace elements including REEs in ten bauxite reference materials (RMs) were determined by ICP‐MS. The data obtained showed excellent inter‐method reproducibility (agreement within 5% for REEs). The relative standard deviation (% RSD) for most elements was < 6%. The concentrations of trace elements in the ten bauxite RMs showed agreement with the limited certified (Li, V, Cr, Cu, Zn, Ga, Sr, Zr and Pb) and information values (Co, Ba, Ce and Hf) available. New trace element data for the ten RMs are provided, some of which for the first time.