计算机串口记时延迟的测量与分析

动态测量中,需要记录观测量的观测时刻,时刻作为测量的基本观测量,需要较高的计时精度,通过串口利用计算机计时是一种便捷可行的方法,但串口的时延是必须要考虑的因素。本文介绍了计算机串口计时的原理及影响其时延的相关因素,阐述了进行时延测量的方法,并通过实验对影响串口时延的5种因素进行了相应的测试和分析,实验结果表明,通常情况下串口时延在毫秒级,通过提高计时程序优先级的方法可成功将时延减小至0.35m s以内;低动态条件下串口时延对动态测量的影响较小,在某些检测设备中甚至可以忽略。     

特殊情况下深基坑围护测斜及变形浅析

结合工程实例具体阐述当测斜管不能正常使用情况下运用全站仪代替测斜仪进行深基坑围护结构的倾斜测量,同时运用岩土工程相关知识对所得监测数据表现的变形及突变原因作了深入分析,获得了预期的安全监测成果,确保了深基坑工程的顺利实施。为今后类似情况的处理提供借鉴。     

基于LabView的GPS数据采集及处理

首先介绍全球定位系统(GPS)的基本工作原理及其通常所采用的通信协议,然后阐述了基于LabView的GPS串口数据采集及处理程序的设计思路和主要功能,最后程序实现了对GPS定位信息的采集、存储及对定位信息的实时显示。     

西安国贸大厦沉降监测方案设计与数据综合分析

本文对西安国贸大厦沉降监测技术方案进行了讨论,着重结合有关工程地质资料对沉降进行了几何分析和物理分析,探讨了沉降引发的原因及建筑物变形规律     

无拉伸动校正技术在近海工程地震勘探中的应用

动校正是地震资料处理的关键内容之一,直接关系到地震资料处理结果的精度.在浅层和大偏移距情况下,常规动校正使波形发生拉伸畸变,波形拉长、频带向低频方向移动,进而影响叠加效果.通常地震资料处理中大都采用切除的方法克服动校正拉伸畸变的影响,这对目的层较深时是可取的.以工程地质调查为目的的海洋地震勘探旨在了解海底之下较浅地层深度范围内的地质信息,一般勘探区水深较浅,数据叠加道数较少,如果仍然采取切除处理,势必严重影响资料的分辨率和准确度.本文阐述了一种无拉伸动校正方法,能较好地解决动校正后的波形畸变问题,理论模型和实际资料的处理结果表明该方法在近海浅层工程地震勘探中是行之有效的,有助于提高速度分析的精度和地震资料的分辨率.     

营口港扩建工程悬浮物对海域环境影响分析

以营口港扩建工程为例,在潮流模拟计算基础上,利用悬浮物扩散模型分析论证了海域施工过程中悬浮物对海域水质及海洋生物的影响。结果表明:施工期对悬浮物影响范围仅局限于港区防波堤范围内,对港区外海域环境影响较小。     

Dynamic propagation criteria for catastrophic failure in planar landslides

Quantitative assessment of the risk of submarine landslides is an essential part of the design process for offshore oil and gas developments in deep water, beyond the continental shelf. Landslides may be triggered by a reduction in shear strength of subsea sediments over a given zone, caused for example by seismic activity. Simple criteria are then needed to identify critical conditions whereby the zone of weakness could grow catastrophically to cause a landslide. A number of such criteria have been developed over the last decade, based either on ideas drawn from fracture mechanics, or considering the equilibrium of the initial weakened zone and adjacent process zones of gradually softening material. Accounting for the history of the weak zone initiation is critical for derivation of reliable propagation criteria, in particular considering dynamic effects arising from accumulating kinetic energy of the failing material, which will allow the failure to propagate from a smaller initial zone of weakened sediments. Criteria are developed here for planar conditions, taking full account of such dynamic effects, which are shown to be capable of reducing the critical length of the softened zone by 20% or more compared with criteria based on static conditions. A numerical approach is used to solve the governing dynamic equations for the sliding material, the results from which justify assumptions that allow analytical criteria to be developed for the case where the initial softening occurs instantaneously. The effect of more gradual softening is also explored. Copyright © 2016 John Wiley & Sons, Ltd.     

Engineering characteristics and uses of duricrusts in Australia

The uses and shortcomings of duricrusts (ferricrete, calcrete and silcrete) in engineering construction (as used for road‐base, aggregate, foundation materials and aquifers) are reviewed. Australian production of these materials represents about one‐third of all unprocessed road‐base and they are especially important as pavement courses for lightly trafficked, low‐cost rural and outback roads. However, duricrusts are regarded as marginal materials at best because of their typically poor grading, particle unsoundness, high fines plasticity, and absorption of water and bitumen. These materials are used because they are available locally in areas that are otherwise lacking in hard rock materials, such as deeply weathered and sedimentary rock terrains. The weathering profiles of which they form part are characterized by high permeability (despite being clay‐rich), variable cementation, low compressibility and a tendency to become weaker with depth. Although the more indurated layers are unrippable, they are also difficult to blast. Pedogenic (nodular) duricrusts were formerly sought for natural road‐base, because they occur widely and require only rudimentary processing. However, well‐cemented groundwater (vadose) duricrusts are now the preferred deposits, even though they require crushing and screening. Ferricrete is the most widely exploited of the duricrusts for engineering purposes, especially in northern and southwestern Australia, although calcrete is important in South Australia and in the Murray Basin. Silcrete is only a minor source of aggregate and road‐base, mainly in western Queensland.     

Hydrodynamic characteristics and sediment transport of a tidal river under influence of wading engineering groups

By taking the Yong River for example in this paper, based on the multiple measured data during 1957 to 2009, the change process of runoff, tide feature, tidal wave, tidal influx and sediment transport are analyzed. Then a mathematical model is used to reveal the influence mechanism on hydrodynamic characteristics and sediment transport of the wading engineering groups such as a tide gate, a breakwater, reservoirs, bridges and wharves, which were built in different periods. The results showed the hydrodynamic characteristics and sediment transport of the Yong River changed obviously due to the wading engineering groups. The tide gate induced deformation of the tidal wave, obvious reduction of the tidal influx and weakness of the tidal dynamic, decrease of the sediment yield of flood and ebb tide and channel deposition. The breakwater blocked estuarine entrances, resulting in the change of the tidal current and the reduction of the tidal influx in the estuarine area. The large-scale reservoirs gradually made the decrease of the Yong River runoff. The bridge and wharf groups took up cross-section areas, the cumulative affection of which caused the increase of tidal level in the tidal river.     

上海及其邻区潜在地质灾害的构造背景与成因机理

本文基于上海及其邻区活动断裂构造及有关地区潜在地质灾害特点的研究,论证了上海及其邻区潜在地质灾害的三种基本类型及其构造背景与成因机理;指出:上海及其邻区楔形断裂系统的存在与活动是诱发有关地区潜在地质灾害的主导因素。文中明确指出了上海及其邻区楔形断裂系统的研究在相关地区进行潜在地质灾害评价与预测方面的应用前景与发展方向。