Dust production and the release of iron oxides resulting from the aeolian abrasion of natural dune sands

Global dust trajectories indicate that signi?cant quantities of aeolian‐transported iron oxides originate in contemporary dryland areas. One potential source is the iron‐rich clay coatings that characterize many sand‐sized particles in desert dune?elds. This paper uses laboratory experiments to determine the rate at which these coatings can be removed from dune sands by aeolian abrasion. The coatings impart a red colour to the grains to which previous researchers have assigned variable geomorphological signi?cance. The quantities of iron removed during a 120 hour abrasion experiment are small (99 mg kg^?1) and dif?cult to detect by eye; however, high resolution spectroscopy clearly indicates that ferric oxides are released during abrasion and the re?ectance of the particles alters. One of the products of aeolian abrasion is ?ne particles (<10 µm diameter) with the potential for long distance transport. Copyright © 2004 John Wiley & Sons, Ltd.     

The influence of particle composition on thorium scavenging in the NE Atlantic ocean (POMME experiment)

²³⁰Th, ²³²Th and ²³⁴Th were analyzed in sinking particles collected by moored and drifting sediment traps in the NE Atlantic Ocean (POMME experiment) in order to constrain the phase(s) carrying Th isotopes in the water column. It reveals a contrasted behaviour between ²³⁴Th and ²³⁰Th. ²³⁴Th is correlated to the particulate organic carbon suggesting that it is primarily scavenged by organic compounds in the surface waters. ²³⁰Th_xs is correlated with Mn, Ba and the lithogenic fraction that are enriched in small suspended particles and incorporated in the sinking particulate flux throughout the water column. The lack of correlation between ²³⁰Th_xs and CaCO₃ or biogenic silica (bSi) indicates that CaCO₃ and bSi are not responsible for ²³⁰Th scavenging in the deep waters of this oceanic region. ²³⁰Th is generally correlated with the lithogenic content of the trapped material but this correlation disappears in winter during strong atmospheric dust inputs suggesting that lithogenic matter is not directly responsible for ²³⁰Th scavenging in the deep waters or that sufficient time is required to achieve particle–solution equilibration. MnO₂ could be the prevalent ²³⁰Th_xs-bearing phase. The narrow range of K_{d_MnO2}^Th obtained for very contrasted oceanic environments supports a global control of ²³⁰Th_xs scavenging by MnO₂ and raises the possibility that the ²³⁰Th–²³¹Pa fractionation is controlled by the amount of colloidal MnO₂ in seawater.     

Assessment of contaminants in Dubai coastal region, United Arab Emirates

Coastal uses and other human activities have inevitably impinged on the Gulf environment; therefore, these regions require continuous monitoring. The investigated area covered the maximum fragments of Dubai coastal region in the Arabian Gulf. The determination of major oxides and trace metal concentrations in Dubai sediments revealed three heavily and moderately contaminated regions. One is in the far northeastern part at Al-Hamriya Sts 1–3 and contaminated by Fe, Cu, Pb, and Zn; the second is in the mid-northeastern part at Dry Docks and contaminated by Cu, Ni, Pb, and Zn; and finally, the third is in the near southwestern part at Dubal and contaminated by Fe, Mg, Cr, Ni, and Zn. Al-Hamriya St 3 represented the highest values of Cu, Pb, and Zn, whereas Dubal exhibited the maximum values of Fe, Mg, Ba, Cr, Mn, Ni, and V. The anthropogenic discharge and natural deposits are the main sources of contamination. In general, all trace and major elements showed the minimal levels at Jebel Ali Sanctuary (Sts 11, 12, 13) except for Sr and Ca, which showed their maximum values. The highest concentrations of Ca and Sr are mainly attributed to carbonate gravel sands and sands, which cover most stations. Each of V and Ni showed negative correlation with TPH, which may be indicated that the source of oil contamination in the region is not related to crude oil but mostly attributable to anthropogenic sources. The significant positive correlation, which was found between trace metals and TOC indicates that organic matter plays an important role in the accumulation of trace metals in case of Cu, Zn, and Pb.     

基于主体功能区约束的大气污染物总量控制目标分配研究

考虑经济发展水平、污染物排放现状、污染物治理水平、空气质量,特别是国家主体功能区环境目标约束等因素,构建大气污染物排放总量分配的指标体系,用改进的等比例分配方法对2015年国家SO2,NOx总量控制目标进行区域分配。分配结果表明:SO2和NOx削减量大的省份主要集中在华北平原及其周围地区,这些地区污染物排放量大、空气质量较差;削减比例较大的地区主要集中在西部地区以及北京、天津2个直辖市,这些地区单位GDP能耗高、工业污染物去除率低、空气质量差;削减量相对较小的地区主要集中在西南和南部一些省份;削减比例较小的地区主要集中在中南部和南部几个省份,这些地区污染物排放量相对较少,空气质量好于其他省份。     

朝不楞多金属矿外围1∶5万地电化学勘查应用

运用地电化学技术在内蒙古半干旱草原风成砂浅覆盖区朝不楞多金属矿外围开展了1∶50000面积性勘查工作,并与常规土壤测量开展了对比研究。结果表明:(1)从元素异常强度、衬度、规模及与已知矿体空间对应性等方面对比,地电化学测量比常规土壤测量具有显著优越性;(2)地电化学测量在区域上显现出Ag-Pb-Zn-Bi-Cd及Cu-Co-Cr-Fe-La-Mo-Ni两套元素异常组合,与已知见矿钻孔中探测到的矽卡岩型铁矿及热液型铅锌矿均有出现具有较好的对应性;(3)在工区东部及东南部未知区发现多处异常强度、规模较大的多元素组合异常,建议开展进一步的勘查工作,以实现该矿区找矿突破。     

激发极化法在辽宁本溪某矽卡岩型铜多金属矿勘查中的应用

测区燕山期大面积中酸性岩浆侵入寒武系、奥陶系碳酸盐岩,在岩体外接触带上形成大量的矽卡岩,并伴有较强烈的铜多金属矿化。本次物探工作在1∶5万区调工作基础上,采用激电中梯与激电测深两种方法进行金属矿产勘查,圈定激电异常12个,反演了穿过JD3、JD7、JD8高极化异常体的形态,规模及埋深,并解译隐伏断裂2条。结合区内地质特征与钻孔资料,认为异常区的低阻高极化体是岩体外接触带上矽卡岩化蚀变带的反映,断裂为矿液运移、容矿提供了有利条件。该研究成果表明,激发极化法是寻找矽卡岩型铜多金属矿的有效方法。     

新疆阿尔泰库马苏铅锌多金属矿床成因探讨

库马苏铅锌多金属矿床位于阿尔泰山东段南麓库马苏一带的中蒙边境地区,行政区划隶属新疆维吾尔自治区富蕴县管辖,距富蕴县城约100 km。 该矿床位于阿尔泰陆缘活动带之诺尔特晚古生代上叠盆地中,南部沿库热克特大断裂与哈龙早古生代岩浆弧带毗邻;该地区金、铜及多金属矿（化）点密集分布于下石炭统红山嘴组地层内,而且由西向东,矿产种类呈一定的规律性变化,西部为铜、金,中部为金及多金属,东部以多金属为主;反映在地球化学异常上表现出西部以金、砷、锑异常为主,中部以面积较小的金、砷、锑、铅、锌异常为主,东部铅、锌、铜、银、金、砷、锑异常集中分布。目前,在成矿带内自西向东已发现红山嘴金矿点,小土尔根铜矿、塔斯比伊克金矿点、阿克提什坎金矿点、库马苏金多金属矿等。矿床所在区域构造发育,变质作用强烈,岩浆活动期次多、规模大,是非常有利的成矿环境。结合矿床地质特征,判定库马苏铅锌多金属矿床的形成与该区域岩浆作用和火山活动密切相关,为岩浆热液充填交代成因铅锌金多金属矿床。     

内蒙古二连—东乌旗铜钼多金属成矿带中西段 找矿进展

二连—东乌旗成矿带位于西伯利亚板块和华北板块之间的兴蒙造山带东段,属西伯利亚板块东南南大陆边缘早古生代火山岛弧带、晚古生代二连－贺根山板块对接带。自中生代开始,区内逐渐向滨太平洋构造域发展过渡,并在中生代晚期经历了明显的由挤压构造体系向伸展构造体系的转换过程,在一系列构造演化及其相应的岩浆作用、火山作用和变质作用过程中,分别伴随着金、钼、铜、铅、锌等多金属富集和矿化,该地区具有优越的成矿条件。     

姚家岭锌金多金属矿床围岩蚀变三维空间定量分析研究

姚家岭锌金多金属矿床是近年来在长江中下游成矿带铜陵矿集区新发现的大型多金属矿床。姚家岭锌金多金属矿床的成矿作用具有多阶段性的特点,矿床范围内围岩蚀变强烈,蚀变类型复杂多样。三维地质信息技术及三维空间分析方法为定量化分析围岩蚀变的空间分布以及与矿化之间的相关关系提供了有利工具。本文基于上述方法,有效地对姚家岭锌金多金属矿床的围岩蚀变的分带性及其与不同矿化之间的关联性行了定量分析。较之于传统研究方法,不仅能快速地对蚀变与矿化的分布特征进行分析,还能从定量的角度获取不同信息之间的规律性和相关性。本文采用的相关方法不但有助于更准确的判定蚀变分带及规律,还可为矿床的成矿模式及找矿模型的建立提供定量化的数据支持。     

陕县宽坪银多金属矿区地质特征与成矿规律

陕县宽坪银多金属矿位于崤山矿集区内,已探明银铅锌储量达中等以上规模。通过研究矿区地质特征,认为矿体主要受构造蚀变带控制,在含矿热液的多期、多阶段交代和充填作用下,在构造有利部位富集成矿。