基于边优先的任意多边形最优三角剖分

针对现有多边形三角剖分算法不能同时兼顾算法的简单有效性、适用性以及剖分三角网质量的问题,提出一种基于边优先的任意多边形最优化三角剖分算法:首先直接对多边形的边进行构网,最后再对生成的非约束边进行构网,最终完成整个多边形的三角剖分。剖分得到的三角网为约束Delaunay三角网,网形稳定、最优,算法简单,执行效率较高,且适用于任意复杂多边形。实验证明了该算法的合理性和有效性,较好地解决了现有多边形三角剖分算法存在的问题。     

改进的边缘角度直方图在遥感图像检索中的应用

针对基于形状的遥感图像检索中区域分割困难这个问题,本文提出利用边缘角度直方图作为形状特征对遥感图像进行检索;针对遥感影像分辨率和颜色反差对检索性能的影响,本文提出采用多尺度分析的思想,提取图像在多个尺度上的边缘角度直方图特征进行检索。通过单一尺度边缘角度直方图特征和多尺度边缘角度直方图特征检索的对比实验,揭示了本文所提出的改进方案使遥感图像的检索精度提高了约31个百分点。     

安徽省耿皇勘探区煤系地层沉积环境及成煤条件浅析

以耿皇勘探区钻孔资料为基础,对该区煤系地层沉积环境及成煤条件进行分析,简述了本区煤系地层是在海退基础上,以三角洲为主体的三角洲相与泻湖海湾潮坪相相互交替的沉积体系,通过对该特点的分析研究,为今后地质勘探和煤矿开采提供了借鉴和依据。     

High heat flow anomalies on an old oceanic plate observed seaward of the Japan Trench

Thirty-three new measurements on the seaward slope and outer rise of the Japan Trench along a parallel of 38°45′N revealed the existence of high heat flow anomalies on the subducting Pacific plate, where the seafloor age is about 135 m.y.. The most prominent anomaly with the highest value of 114 mW/m² is associated with a small mound on the outer rise, which was reported to be a kind of mud volcano. On the seaward slope of the trench, heat flow is variable: high (70–90 mW/m²) at some locations and normal for the seafloor age (about 50 mW/m²) at others. The spatial variation of heat flow may be related to development of normal faults and horst/graben structures due to bending of the Pacific plate before subduction, with fluid flow along the fault zones enhancing the vertical heat transfer. Possible heat sources of the high heat flow anomalies are intra-plate volcanism in the last several million years like that discovered recently on the Pacific plate east of the Japan Trench.     

论南岭成矿带大宝山斑岩型铜矿的特殊性及其勘查意义

广东省大宝山矿床是南岭成矿带唯一的大型铜多金属矿床，此次研究在矿区中南部发现了细脉浸染状铜矿的新类型。为确定其是否为斑岩型铜矿的成因类型，本文在梳理南岭成矿带铜成矿条件和成矿规律的基础上，查明了矿区中南部英安斑岩的蚀变和铜矿化特征。综合研究认为南岭成矿带早侏罗世中酸性斑岩的小岩体较多，叠加多期断裂构造和碳酸盐岩建造，非常有利于铜多金属成矿物质的运移、富集。大宝山英安斑岩发育黑云母化、钾长石化、青磐岩化、绢英岩化、泥化等蚀变类型，铜矿化与绢英岩化、绿泥石化关系密切。大宝山铜矿中的英安斑岩沿逆冲推覆构造侵位并呈岩墙状产出，冷却过程中受区域构造应力产生了一组平行裂隙，岩浆房去气作用排出的热液沿裂隙蚀变围岩并充填成矿。大宝山斑岩型铜矿取得的找矿勘查成果表明，“全位成矿，缺位找矿”理念可以有效指导靶区圈定和老矿山外围（深部）找矿勘查，早侏罗世的南岭具有形成较大规模斑岩型铜矿的条件。     

寒武系古流体地球化学特征及其对页岩气保存的指示意义 ——以中扬子地区寒武系页岩气发现井宜地2井为例

保存条件是中扬子地区页岩气富集的关键因素之一，宜地2井是中扬子寒武系页岩气发现井，通过对该井全井段岩芯裂缝古流体的地球化学分析，探讨了寒武系古流体成因和对水井沱组页岩气保存条件的指示意义。结果认为：① 覃家庙组膏岩层之上方解石脉缺少Fe2+、Mn2+，且δ13C和δ18O值较围岩偏负，指示其形成于氧化的环境，石牌组方解石脉δ13C偏负，黄铁矿脉δ34S值与膏盐相似，表明其成因与TSR密切相关；水井沱组脉体δ13C和δ18O与围岩相似，形成于封闭的环境。② 方解石脉包裹体群SO42-、Ca2+、Mg2+含量整体上由覃家庙组向上向下分别递减，钠氯系数以水井沱组最低，整体上向上升高，表明覃家庙组是高盐度卤水的主要来源，水井沱组受外来流体影响弱；包裹体水溶液δD和δ18O也指示娄山关组、石牌组方解石脉成因分别与大气水、TSR相关。③ 古流体地球化学研究表明宜昌地区页岩气保存条件整体较好，页岩气散失的主要通道是垂直裂缝，页岩气保存条件好与膏盐盖层发育、后期构造破坏弱、脉体对裂缝的及时封闭以及白垩系盖层等因素密切相关。     

船式支护在基坑中的应用

在深厚软土地区的基坑,对基坑底软土进行搅拌加固形成强度较高的底板而保证坑底稳定,侧壁采用支护桩支护保证侧壁的稳定使其不倾倒,支护桩与加固底板两者共同作用形成的船状结构支护体系类似轮船的船侧壁及船底板,以保证基坑的稳定。结合具体的工程实例,介绍了船式支护的侧壁及底板的设计方法。工程案例成功实施,监测结果表明,船式支护既可避免支护桩嵌固深度过长,又利于软土的土方施工及工程桩的保护,是安全可靠的,对类似工程有一定的参考意义。     

A combined study of macroseismic data and focal mechanisms applied to the West-Bohemian earthquake,Czechoslovakia

The main shock of the West-Bohemian earthquake swarm, Czechoslovakia, (magnitudem=4.5, depthh=10 km) exhibits an irregular areal distribution of macroseismic intensities 6° to 7° MSK-64. Four lobes of the 6° isoseismal are found and the maximum observed intensity is located at a distance of 8 km from the instrumentally determined epicentre. This distribution can be explained by the energy flux of the directS wave generated by a circular source, the hypocentral location and focal mechanism of which are taken from independent instrumental studies. The theoretical intensity, which is assumed to be logarithmically proportional to the integrated squared ground-motion velocity (i.e.,I=const+log v ² (t)dt), fits the observed intensity with an overall root-mean-square error less than 0.5°. It is important that the present intensity data can also be equally well explained by the isotropic source. The fit was attained by means of a horizontally layered model though large fault zones and an extended sedimentary basin suggest a significant lateral heterogeneity of the epicentral region. The results encourage a broader application of the simple modelling technique used.     

论四川盆地三叠系地下水水文地质条件

四川盆地三叠系地下水可划分出碎屑岩孔隙裂隙和碳酸盐岩岩溶裂隙两大储集类型。按此处构造开启程度和埋深条件等的不同,下中三叠统地下水有沉积变质水和渗入淋滤水两种基本成因类型,水动力特征各异。沉积变质水处于深埋封闭条件,受地静压力驱动控制;渗入淋滤水分布于背斜露头区和浅部地区,受静水压力驱动控制。并由此控制了盆地三叠系盐类的保存条件。     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.