深部取心钻探拧卸工具机械化的思考和实践

通过分析钻杆拧卸对地质钻探起下钻效率的制约以及目前拧卸工具存在的问题,提出了适合深部取心钻探的拧卸工具机械化研制思路及技术要点,介绍了SQ114/8型绳索取心钻杆专用液压钳的技术、性能特点和应用效果。     

高强耐热铝合金钻杆材料优选

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素,以钻柱组合设计为基础准则,从特深孔钻探工程技术需求出发,开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h,2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h;2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金,在高温瞬时条件下的力学性能劣于2618铝合金;2219铝合金中含有Zr,该元素在热暴露过程中起到减缓溶质扩散速率的作用,这对提高热暴露后的剩余强度是有利的。     

Corona processes and lightning attachment: The effect of wind during thunderstorms

A simple model of a glow corona occurring near the tip of a grounded electrode in a thundercloud electric field that can be enhanced by an approaching downward leader has been studied analytically and numerically with regard to the effect of wind. We obtained an approximate expression for corona current taking into account the (i) removal of space charge from the coronating point due to ion drift and wind and (ii) image of the charge in the ground. As the wind velocity decreases to zero, the expression tends to that obtained previously in the absence of wind. It was shown analytically and numerically that, in a thundercloud electric field, even moderate wind velocities lead to hundreds of percent increase in the corona current. This current decreases with time only slightly in a steady thundercloud electric field, as opposed to the current behavior in the absence of wind. However, even strong wind is not sufficient to affect the properties of a corona intensified in the electric field of an approaching downward leader. The occurrence of wind does not affect the conditions for initiation of an upward connecting leader from grounded objects and consequently the efficiency of lightning rods of ordinary height.     

油压夯管锤蓄能器与活塞振动耦合性的数学解析

蓄能器容积的变化与夯管锤的工作过程是紧密联系在一起的，由于活塞的前后运动以及在运动过程中的每一时刻所需要的油量不同的，理想状态就要通过蓄能器的容积变化来调节，就是说蓄能器的容积变化要与夯管锤的冲击振动相耦合。简要介绍了油压夯管锤结构原理，分别解释了油压夯管锤蓄能器与夯管锤的容积压力耦合。     

深孔用高钢级绳索取心钻杆分区热处理工艺试验研究

为改善绳索取心钻杆受力工况,延长钻杆使用寿命,满足深孔及特深孔钻探施工要求,开展了对绳索取心钻杆体进行分区热处理工艺的试验研究。试验选用高钢级薄壁管材,通过对钻杆两端300 mm左右的区间内进行盐浴淬火及高温回火处理,保证了调质区域的机械性能,硬度和金相组织均匀性良好,同时热处理过渡带影响区域小。试制加工的特深孔绳索取心钻杆具有两端部螺纹连接段刚性强、杆体中部韧性好的特点。该钻杆在山东莱州西岭村矿区完成了2845.55 m深孔的钻进施工,使用情况良好。     

TK-1型压入活塞式取样器运动阻力计算及海上取样试验

在海上采用压入活塞取样器取砂、土样在国内尚属首次。经过对取样器进行科学的模拟计算,获得了取样器运动阻力和压入地层所需的压力,试验表明,这些数据符合海上取样的实际情况。所设计的密封装置、翻板取样器及PC取样管等满足了海上取样要求。     

导水岩溶陷落柱堵水塞建造技术

以东庞矿特大陷落柱突水快速封堵工程为例,分析了陷落柱空间结构特征及突水水文地质条件,提出了对突水陷落柱进行快速截水恢复生产和注浆封堵根治水患两个阶段的治理方案。根据陷落柱的空间特征及工程地质条件,确立了分序分段注浆工艺,并且给出了不同阶段注浆工艺的控制标准;建立了注浆钻孔分序分段注浆的吸水率结束标准;提出了在井下疏放堵水塞之上的陷落柱残留水,计算补给水量,定量评价堵水效果的检验方法;采用先进的螺杆钻具定向、随钻测斜与防斜纠偏钻探工艺,使钻进方向始终处于受控状态,确保钻机按照设计参数施工。     

Differential sedimentation versus coring artifacts: a comparison of two widely used piston-coring methods

In order to compare two widely used piston-coring techniques, parallel cores were taken with both a Kullenberg and a Livingstone corer in the deepest part of Soppensee (25 m), a small eutrophic Swiss lake containing varved sediments. The cores were taken within a horizontal distance of 3 m and yield comparable stratigraphic records. Differences in millimetre-scale microstructure are attributed to primary sedimentation processes at the water/sediment interface. Sediment thin-sections, as well as sediment x-radiograph investigations, reveal no difference in microstructure that could unequivocally be attributed to one of the coring methods used. The differences in deposition are therefore thought to reflect the inherent variability of lacustrine sedimentation in Soppensee.Major differences in overall core recovery do occur, however, in organic-rich, highly porous sediments. These variations are primarily attributed to differential gas expansion. Actual sediment-accumulation rates can therefore only be correctly estimated if the sedimentary record can be constrained within a high-resolution temporal framework, e.g. by annual laminations.     

Pressure Tight Piston Corer ——A New Approach on Gas Hydrate Investigation

A pressure tight sediment samphng technology, which can be introduced into the modification of the piston corer to accommedate the investigation of gas hydrate, is put forward. In this paper, the three basic rules of the technology are analyzed in detail: specimen transferring rule, seal self-tightening rule and semi-active pressure holding rule. Based on these, the structure of the pressure tight piston corer is put forward and its working principle is analyzed. Finally, a pressure tight sediment sampler, to which the same technology is apphed, is researched through experiments. Results show that the sampler based on the above-mentioned theory has a good ability in samphng and in -situ pressure holding.     

某斜柱式栈道旅游安全评价

旅游景区栈道由于设计、施工技术资料不详,并经常发生超员现象,存在安全隐患。结合案例工程,根据结点连结方式不同,建立斜柱式栈道力学分析模型。按照实际栈道调查,分别对八种模型在相应荷载下的弯矩、轴力和剪力对比分析,发现最大弯矩和剪力出现在水平横粱上,最大轴力出现在斜支撑上,进而提出栈道最不利内力验算模式。评价认为要保证其结构安全,须确保游人在栈道上单列行走并保持间隔在0．5m以上。但考虑旅游实际需要可增设斜支撑。