Modeling uncertainty in the three-dimensional structural deformation and stratigraphic evolution from outcrop data: Implications for submarine channel knickpoint recognition

Digital outcrop models help to constrain the interactions of stratigraphic and structural heterogeneity on ancient depositional systems. This study uses a stochastic approach that incorporates stratigraphic and structural modeling to interrogate the three-dimensional morphology of deep-water channel strata outcropping on Sierra del Toro in the Magallanes Basin of Chile. This approach considers the relative contributions, and associated uncertainty, of erosional downcutting versus post-depositional structural folding and small-offset faulting on the present-day configuration of the submarine channel complexes. Paleodepositional channel-belt gradients were modeled using a combination of three-dimensional visualization, stochastic surface modeling, palinspastic restoration, and decompaction modeling that are bound with errors constrained by stratigraphic and structural uncertainty. Modeling results indicate that at least 100 m of downcutting occurs over 6 km, and the resultant thalweg gradient of 64–125 m/km (decompacted) suggests that the Cerro Toro axial channel belt is an out-of-grade depositional system. Furthermore, the presence of steeper segments (100–175 m/km decompacted) suggests the preservation of one or more knickpoints that are similar in magnitude to tectonically-induced knickpoints on the modern seafloor. The interpreted knickpoints are correlated with a decreasing channel width-depth ratio and an increase of channel depth. These results indicate that stochastic surface modeling using digital outcrop models can constrain stratigraphic interpretations and post-depositional structural heterogeneity.     

Basin modeling of the Late Miocene Zeit source rock in the Sudanese portion of Red Sea Basin: Implication for hydrocarbon generation and expulsion history

The Late Miocene Zeit Formation is exposed in the Red Sea Basin of Sudan and represents an important oil-source rock. In this study, five (5) exploratory wells along Red Sea Basin of Sudan are used to model the petroleum generation and expulsion history of the Zeit Formation. Burial/thermal models illustrate that the Red Sea is an extensional rift basin and initially developed during the Late Eocene to Oligocene. Heat flow models show that the present-day heat flow values in the area are between 60 and 109 mW/m². The variation in values of the heat flow can be linked to the raise in the geothermal gradient from margins of the basin towards offshore basin. The offshore basin is an axial area with thick burial depth, which is the principal heat flow source.The paleo-heat flow values of the basin are approximately from 95 to 260 mW/m², increased from Oligocene to Early Pliocene and then decreased exponentially prior to Late Pliocene. This high paleo-heat flow had a considerable effect on the source rock maturation and cooking of the organic matter. The maturity history models indicate that the Zeit Formation source rock passed the late oil-window and converted the oil generated to gas during the Late Miocene.The basin models also indicate that the petroleum was expelled from the Zeit source rock during the Late Miocene (>7 Ma) and it continues to present-day, with transformation ratio of more than 50%. Therefore, the Zeit Formation acts as an effective source rock where significant amounts of petroleum are expected to be generated in the Red Sea Basin.     

Numerical investigation of the uplift performance of prestressed fiber-reinforced polymer floating piles

Finite element analyses of prestressed fiber-reinforced polymer floating piles subjected to uplift force have been conducted in this paper. First, parameters of the modified BPE model (bond–slip model at the fiber-reinforced polymer–concrete interface) were calibrated using existing pullout testing data on fiber-reinforced polymer rebars embedded in concrete. Nonlinear spring elements were used in numerical modeling to characterize the bond–slip behavior at the fiber-reinforced polymer–concrete interface. A parametric study was performed to assess the influence of rebar diameter, fiber-reinforced polymer material, embedment length, and concrete strength on the mobilized bond stress. Upon the successful modeling of the pullout performance of fiber-reinforced polymer rebars in concrete, numerical models were developed to investigate the dependence of the uplift performance of floating piles on the prestress level, uplift force, fiber-reinforced polymer type, and compressive strength of concrete.     

沙漠地区地震勘探随机噪声建模及其在噪声压制中的应用

随机噪声是影响地震勘探有效信号的主要因素,其存在大大降低了地震记录的信噪比.在噪声压制方法不断被改进的同时,对随机噪声特性进行研究,了解噪声的产生机制是对其进行压制的先决条件,目前对噪声的研究主要是特性研究以寻找规律性,对其进行定性定量的分析还比较少.本文根据塔里木沙漠地区实际采集环境,考虑到噪声的连续性给计算带来的不便,假设各类噪声源以点源的形式分布在检波器周围,依据相应理论确定各类噪声源的源函数,其激发的噪声经由波动方程传播,将随机噪声作为各类噪声源共同作用的综合波场,建立随机噪声的理论模型.通过分析不同种噪声对地震记录的影响,选取合适的滤波方法对其进行压制,实验结果表明,通过建立沙漠地区随机噪声的理论模型,为选择有效的滤波方法,提高地震记录信噪比起到理论指导作用.     

考虑卷积完全匹配层数值色散的井间电磁三维正演

本文将以卷积完全匹配层为吸收边界条件的时域有限差分法应用到井间电磁的三维正演模拟中.证明了卷积完全匹配层中的数值色散会因为有效延伸因子而产生,列举常规有效延伸因子和网格间距对电磁波相速度各向异性的影响,并通过波场快照验证卷积完全匹配层中数值色散的存在;进而推广三维卷积完全匹配层中最大有效延伸因子、最大网格间距与激励源主频之间的约束,以此完善卷积完全匹配层的最优参数设置方案.在此基础上,通过正演结果中二次场的垂直磁场分量和走时来展示灵敏度分布,以此划定井间电磁勘探的优势区域,提出井间电磁正反演所需要的约束测井系列和最佳取井方案.     

适用于声波方程数值模拟的时间-空间域隐式有限差分算子优化方法

声波方程数值模拟已广泛应用于理论地震计算,同时构成了地震逆时偏移成像技术的基础.对于有限差分法而言,在满足一定的稳定性条件时,普遍存在着因网格化而形成的数值频散效应.如何有效地缓解或压制数值频散是有限差分方法研究的关键所在.有限差分格式分为显式有限差分和隐式有限差分.隐式有限差分能够进一步压制数值频散效应.因此本文提出了给定频率范围满足时间-空间域隐式有限差分频散关系的方法,并根据震源频率、波速和网格间距确定波数范围,在此基础上建立方程确定了相应的隐式有限差分系数,使得差分系数能在更大频率范围符合波场传播规律.通过频散分析和正演模拟,验证了本文方法的有效性.     

张裂型盆地地热参数的垂向变化与琼东南盆地热流分布特征

海洋热流数据是开展海洋地球动力学研究和油气资源评价的基础数据.为深入认识琼东南盆地的地热特征,本文首先利用耦合沉积作用与岩石圈张裂过程的数值模型分析了张裂型盆地主要地热参数的垂向变化特征;并通过钻孔资料的详细分析,获得了琼东南盆地44口钻孔的热流数据;结合海底地热探针获取的热流数据,对琼东南盆地地热特征及其主要影响因素进行了简要分析.结果表明:沉积作用的热披覆效应对表层热流有较明显的抑制作用,由于沉积物生热效应与披覆效应的共同作用,同一钻孔处海底表层热流与钻孔深度3000~4000m处热流或与海底间的平均热流差异很小,可以一起用于分析琼东南盆地的热流分布特征;莺歌海组、乐东组热导率随深度变化小于黄流组及其下地层热导率的变化,钻孔沉积层平均热导率约为1.7 W·(m·K)-1,钻孔地层生热率一般低于2.5μW·m-3,平均生热率为1.34μW·m-3,平均地温梯度主要介于30~45℃/km,热流介于50~99mW·m-2,陆架区热流主要集中于60~70mW·m-2,深水区钻孔具有较高的地温梯度和热流值;从北部陆架与上陆坡区往中央坳陷带,热流值从50~70mW·m-2,增高为65~85mW·m-2,并且往东有升高趋势,在盆地东部宝岛凹陷、长昌凹陷与西沙海槽北部斜坡带构成一条热流值高于85mW·m-2的高热流带.进一步分析认为,琼东南盆地现今热流分布特征是深部热异常、强烈减薄岩石圈的裂后冷却作用、晚期岩浆热事件、地壳与沉积层的生热贡献以及沉积作用的热披覆效应等多种主要因素综合作用的结果.     

川中古隆起超压分布与形成的地温场因素

温度和压力是沉积盆地两个重要的物理场,温度影响着超压的形成和分布.本文根据钻孔实测温度和压力数据分析了川中古隆起现今压力与温度的关系;在实验室对封闭流体进行了多组温-压关系实验;利用等效镜质体反射率和包裹体测温数据恢复了川中古隆起不同井区在白垩纪抬升之前的最大古地温,并在此基础上分析了温度降低对研究区超压的影响;最后探讨了生烃增压和欠压实超压形成过程中温度的作用.研究结果表明,川中古隆起现今超压层的压力系数与温度呈正相关关系;在绝对密封的条件下,当压力大于15 MPa时,温度每变化1℃,压力变化1.076 MPa.川中地区不同井区自晚白垩世以来的差异性降温是现今同一超压层系超压强度不同的主要因素,此外超压层还应发生了流体的横向压力传递和泄漏.下古生界原油裂解形成超压的时间是180~110 Ma;气态烃伴生的盐水包裹体均一温度暗示了在90 Ma超压发生调整.盆地模拟结果显示温度对上三叠统须家河组的欠压实增压影响微弱.     

电导率各向异性的海洋电磁三维有限单元法正演

本文提出了一种基于非结构化网格的海洋电磁有限单元正演算法.为了回避场源奇异性,文中选用二次场算法,将背景电阻率设置为水平层状且各向异性,场源在水平层状各向异性介质中所激发的一次场通过汉克尔积分得到.基于Coulomb规范得到二次矢量位和标量位所满足的Maxwell方程组,通过Galerkin加权余量法形成大型稀疏有限元方程,采用不完全LU分解(ILU)预条件因子的quasi-minimum residual(QMR)迭代解法对有限元方程进行求解得到二次矢量位和标量位;进而,利用滑动平均方法得到二次矢量位和标量位在空间的导数,由此得到二次电磁场;通过一维模型对算法的可靠性进行验证,与此同时,针对实际复杂海洋电磁模型,比较有限元模拟结果与积分方程模拟结果,进一步验证算法精度.若干计算结果均表明,文中算法具有良好的通用性,适用于井中电磁、航空电磁,环境地球物理等非均匀且各向异性介质中的电磁感应基础研究.     

An isolation system for limited seismic gaps in near‐fault zones

The ability of a recently proposed seismic isolation system, with inherent self‐stopping mechanism, to mitigate or even eliminate seismic pounding of adjacent structures is investigated under severe near‐fault earthquakes. The isolation system is referred to as roll‐in‐cage (RNC) isolator. It is a rolling‐based isolator that provides in one unit the necessary functions of vertical rigid support, horizontal flexibility with enhanced stability, hysteretic energy dissipation, and resistance to minor vibration loads. In addition, the RNC isolator is distinguished by a self‐stopping (buffer) mechanism to limit the bearing displacement under excitations stronger than a design earthquake or at limited seismic gaps, and a linear gravity‐based self‐recentering mechanism to prevent permanent bearing displacement without causing vertical fluctuation of the isolated structure. A previously developed multifeature SAP2000 model of the RNC isolator is improved in this paper to account for the inherent buffer mechanism's damping. Then, the effectiveness of the isolator's buffer mechanism in limiting peak bearing displacements is studied together with its possibly arising negative influence on the isolation efficiency. After that, the study investigates how to alleviate or even eliminate those possibly arising drawbacks, due to the developed RNC isolator's inner pounding as a result of its buffer activation, to achieve efficient seismic isolation with no direct structure‐to‐structure pounding, considering limited seismic gaps with adjacent structures and near‐fault earthquakes. The results show that the RNC isolator could be an efficient solution for aseismic design in near‐fault zones considering limited seismic gaps. Earthquake Engineering and Structural Dynamics. Copyright © 2014 John Wiley & Sons, Ltd.