自聚焦光纤中传导模的场分布

从亥姆霍兹方程出发，导出了自聚焦光纤中传导模在圆柱坐标系中的场分布形式，并给出了几个低阶模的分布图。     

一种新型的建筑物修复或抗震加固方法

叙述了采用高强度纤维／环氧树脂复合材料对建筑物进行修复或抗震加固方法的特点、施工方法,实例表明该方法有广泛的应用前景,指出,该方法对保证人民财产安全及搞好防震减灾工作有积极作用。     

Cotton Fiber/ZrO2, A New Material for Adsorption of Cr(VI) Ions in Water

The natural cotton fiber was used to synthesize an anion exchange, containing ZrO₂ film on its surface, NCFZC (natural cotton fiber/ZrO₂ composite). This anion exchanger was produced by the reaction of the zirconium oxychloride and hydroxyl groups on surface of the natural cotton fiber. The material was used for Cr(VI) ions adsorption studies. Adsorption equilibrium time and optimum pH for Cr(VI) adsorption were found to be 6 h and 4.0, respectively. The Langmuir and Temkin isotherms were used to models adsorption equilibrium data. The adsorption capacity of NCFZC was found to be 1.33 mmol/g. Kinetic studies showed that the rate of adsorption of Cr(VI) on NCFZC obeyed a pseudo‐second‐order kinetic model.     

分布式光纤振动传感系统中数据采集及信号处理系统设计

本文主要介绍了一套分布式光纤振动传感系统中的数据采集及信号处理系统,该系统设计采用高性能的运算放大电路完成光电信号调理,以高精度差动模数转换器AD9246完成模数转换工作,并选用高性能FPGA作为核心逻辑控制器,并以低功耗的OMAP-L137作为CPU负责振动数据计算、网络通讯等工作,从而使该-OTDR分布式光纤振动传感系统测量范围扩展到25 km范围。本文通过计算相邻测点振动增量方法检测是否发生了振动入侵,提高了分布式光纤振动入侵检测的灵敏度。该设计方法提高分布式光纤振动传感系统的信噪比,使得该系统振动检测灵敏度提高、抗干扰能力增强,因此该分布式光纤振动传感系统可以用于实际工程的振动监控。     

四川平武板状绿柱石矿物学特征及板状成因

在综合该区绿柱石产出背景的基础上,从围岩蚀变、矿物共生组合、矿物标型形态和绿柱石测温测压等方面确定平武绿柱石矿床是气成高温浅成石英脉型矿床。文中对绿柱石矿物进行了湿法化学分析、X射线粉晶衍射分析、微形貌分析,研究了该区绿柱石的形态、物性、化学成分及类质同象特征,确定该区绿柱石为板状晶形的含铯钠锂绿柱石,碱金属平均质量分数为2.412%(Li2O+Na2O+K2O+ Rb2O+Cs2O)。板状含碱绿柱石一般发育在伟晶岩中,气成高温热液矿床中产出板状含碱绿柱石极为罕见。在以上工作基础上,从绿柱石形成的内因和外因两方面探讨了绿柱石的板状成因。     

水晶包裹体的类型及成因综述

水晶中的包裹体是在水晶生长过程中被包裹在晶体内的由一相或多相物质组成的封闭系统。水晶中包裹体的形成与生长时的物化条件密切相关 ,而生长过程中的物化环境又直接影响了水晶的结晶习性。     

天文光干涉与综合孔径技术的发展

本文简单介绍了光干涉与综合孔径技术发展的历史、国际上用于天文观测的一些著名光干涉仪的技术特点和进展、以及近年来我国开展的与光干涉 ,综合孔径技术有关的工作 ,最后简要介绍了在光学综合孔径技术领域所发展的光纤与集成光学等新技术     

颗粒状纳米碳酸钡锶钙的研制

介绍一种气-液相合成技术合成氧化物阴极用三元碳酸盐,研究沉淀温度、浓度及搅拌速率对合成碳酸钡锶钙结晶形貌的影响,分析其结晶过程.通过优化合成溶液温度及合成浓度,控制碳酸盐的成核和生长速率,合成了一种颗粒状纳米三元碳酸盐,并进行直流发射测试.实验表明,这种纳米碳酸盐能明显提高氧化物阴极的发射性能.     

Response of detrital zircon and monazite,and their U–Pb isotopic systems,to regional metamorphism and host‐rock partial melting,Cooma Complex,southeastern Australia

Progressive Early Silurian low‐pressure greenschist to granulite facies regional metamorphism of Ordovician flysch at Cooma, southeastern Australia, had different effects on detrital zircon and monazite and their U–Pb isotopic systems. Monazite began to dissolve at lower amphibolite facies, virtually disappearing by upper amphibolite facies, above which it began to regrow, becoming most coarsely grained in migmatite leucosome and the anatectic Cooma Granodiorite. Detrital monazite U–Pb ages survived through mid‐amphibolite facies, but not to higher grade. Monazite in the migmatite and granodiorite records only metamorphism and granite genesis at 432.8 ± 3.5 Ma. Detrital zircon was unaffected by metamorphism until the inception of partial melting, when platelets of new zircon precipitated in preferred orientations on the surface of the grains. These amalgamated to wholly enclose the grains in new growth, characterised by the development of {211} crystal faces, in the migmatite and granodiorite. New growth, although maximum in the leucosome, was best dated in the granodiorite at 435.2 ± 6.3 Ma. The combined best estimate for the age of metamorphism and granite genesis is 433.4 ± 3.1 Ma. Detrital zircon U–Pb ages were preserved unmodified throughout metamorphism and magma genesis and indicate derivation of the Cooma Granodiorite from Lower Palaeozoic source rocks with the same protolith as the Ordovician sediments, not Precambrian basement. Cooling of the metamorphic complex was relatively slow (average ～12°C/10⁶y from ～730 to ～170°C), more consistent with the unroofing of a regional thermal high than cooling of an igneous intrusion. The ages of detrital zircon and monazite from the Ordovician flysch (dominantly composite populations 600–500 Ma and 1.2–0.9 Ga old) indicate its derivation from a source remote from the Australian craton.     

四种海水透明度现场测量方法的对比分析及发展趋势研究

随着海洋探测的不断发展,海水透明度作为海水光学性质的一个重要参量,也越来越受到人们的关注。文章对比分析了4种海水透明度现场测量方法:透明度盘法~([1])、光纤式高光谱剖面测量法~([2])、激光衰减测量法~([3])和基于双光路原理的海水IOPs高光谱测量法~([4]),主要分析了4种方法的测量原理,对比各自的优缺点,并提出了海水透明度测量未来发展设想。