刃具斜切入破岩的试验与研究

介绍了刃具斜切入破岩的试验装置及试验结果，推导出了跃进载荷的计算公式，并对试验结果进行了理论分析，探讨了影响刃具侵入岩石难易的因素和影响破岩比功大小的因素。     

新型岩石力学测试系统及应用领域

介绍了Ｔｅｒｅａ Ｔｅｋ系统的组成和其主要功能，并针对石油工程和钻探领域应用岩石力学参数领域作了阐述。     

碎石桩加固冷却塔地基效果的检测技术与质量评价

介绍了安阳电厂冷却塔碎石桩复合地基静载、动力触探、瑞利波法系列原位试验。根据试验结果，对冷却塔地基加固与改良效果及施工质量进行了评价。     

Application of an optimum design technique for determining the coefficient of consolidation by using piezocone test data

For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation from piezocone test results. However, depending on assumptions and analytical techniques, it could vary considerably, even for a specific degree of consolidation. In this paper a method is proposed to determine a consistent coefficient of consolidation by applying the concept of an optimum design technique over all ranges of the degree of consolidation. Initial excess pore pressure distribution is assumed to be capable of being obtained by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of a two-dimensional linear-uncoupled axi-symmetric consolidation analysis. The minimization of differences between measured and predicted excess pore pressure was carried out by the BFGS unconstrained optimum design algorithm with a one-dimensional golden section search technique. By analyzing numerical examples and in-situ test results, it was found that the adopted optimum design technique gives consistent and convergent results.     

A variance-ratio test for supporting a variable mean in kriging

This article discusses the issue of whether to use a variable mean and describes a test that can be used to evaluate whether it is justified to add terms to the drift (deterministic part) of a geostatistical model. The basic model could be the intrinsic one, where the deterministic part is a constant, and the alternate model could be any model that includes a constant term in the expression for the drift. Also, differences between constant- and variable-mean models are discussed.     

Testing an earthquake prediction algorithm

A test to evaluate earthquake prediction algorithms is being applied to a Russian algorithm known asM8 TheM8 algorithm makes intermediate term predictions for earthquakes to occur in a large circle, based on integral counts of transient seismicity in the circle. In a retroactive prediction for the period January 1, 1985 to July 1, 1991 the algorithm as configured for the forward test would have predicted eight of ten strong earthquakes in the test area. A null hypothesis, based on random assignment of predictions, predicts eight earthquakes in 2.87% of the trials. The forward test began July 1, 1991 and will run through December 31, 1997. As of July 1, 1995, the algorithm had forward predicted five out of nine earthquakes in the test area, which success ratio would have been achieved in 53% of random trials with the null hypothesis.     

静力弹塑性分析(Pushover Analysis)的基本原理和计算实例

阐述了美国两本手册FEMA273／274和ATC-40中关于静力弹塑性分析的基本原理和方法，给出了利用ETABS程序进行适合我国地震烈度分析的计算步骤，并用一框剪结构示例予以说明，表明Pushover方法是目前对结构进行在罕遇地震作用下弹塑性分析的有效方法。     

Seismic performance evaluation of steel arch bridges against major earthquakes. Part 1: dynamic analysis approach

In this study the inelastic behavior of steel arch bridges subjected to strong ground motions from major earthquakes is investigated by dynamic analyses of a typical steel arch bridge using a three‐dimensional (3D) analytical model, since checking seismic performance against severe earthquakes is not usually performed when designing such kinds of bridge. The bridge considered is an upper‐deck steel arch bridge having a reinforced concrete (RC) deck, steel I‐section girders and steel arch ribs. The input ground motions are accelerograms which are modified ground motions based on the records from the 1995 Hyogoken‐Nanbu earthquake. Both the longitudinal and transverse dynamic characteristics of the bridge are studied by investigation of time‐history responses of the main parameters. It is found that seismic responses are small when subjected to the longitudinal excitation, but significantly large under the transverse ground motion due to plasticization formed in some segments such as arch rib ends and side pier bases where axial force levels are very high. Finally, a seismic performance evaluation method based on the response strain index is proposed for such steel bridge structures. Copyright © 2004 John Wiley & Sons, Ltd.     

Stability and accuracy analysis of the central difference method for real‐time substructure testing

The central difference method (CDM) that is explicit for pseudo‐dynamic testing is also believed to be explicit for real‐time substructure testing (RST). However, to obtain the correct velocity dependent restoring force of the physical substructure being tested, the target velocity is required to be calculated as well as the displacement. The standard CDM provides only explicit target displacement but not explicit target velocity. This paper investigates the required modification of the standard central difference method when applied to RST and analyzes the stability and accuracy of the modified CDM for RST. Copyright © 2005 John Wiley & Sons, Ltd.     

Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information

Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd.