脂肪水平对厚唇弱棘鯻生长及肠道脂肪酶活性的影响

以鱼油为脂肪源,配制成脂肪水平(质量分数,下同)分别为3.1%、5.8%、9.4%、11.9%和15.1%的5种等氮饲料,探讨饲料脂肪水平对初始体重为(4.05±0.11)g的厚唇弱棘鯻(Hephaestus fuliginosus)生长及肠道脂肪酶活性的影响。结果表明,随着饲料脂肪含量提高,实验用鱼脏体比、肥满度及肌肉粗蛋白含量也随着提高,但各组间差异不显著(P>0.05)。饲料脂肪水平从3.1%增加到9.4%,厚唇弱棘鯻的饲料效率呈升高趋势,相对增重率值由76.42%±5.88%升至102.09%±5.31%;而当饲料脂肪水平从9.4%提高至15.1%,饲料效率呈降低趋势(P<0.05),相对增重率值降为70.54%±2.06%。随着饲料脂肪水平提高,厚唇弱棘鯻肝体比、肌肉粗脂肪含量、肠道脂肪酶活性均呈上升趋势,且各组间差异显著(P<0.05)。表明本实验条件下饲料脂肪含量超过9.4%可导致厚唇弱棘鯻生长和饲料利用下降,对其形体特征、肌肉粗脂肪含量以及肠道脂肪酶活性均有显著影响。     

MCM-41/β介孔—微孔复合分子筛的合成、表征及催化性能

以β分子筛为前驱体,水玻璃和硫酸铝为外加硅铝源,采用二元混合表面活性剂为结构导向剂,水热晶化合成MCM-41/β介孔—微孔复合分子筛,并利用XRD、SEM、TEM、N2吸附—脱附和Py-IR等对复合分子筛进行表征,以十氢萘为模型化合物考察复合样品的催化裂解反应性能.结果表明:MCM-41/β介孔—微孔复合分子筛中存在MCM-41分子筛六方介孔结构和β分子筛微孔结构,对十氢萘具有较强的催化反应活性,催化裂解转化率为93.16%.     

高精度高性价比的GPS定向仪的设计

介绍了一种高精度、高性价比的GPS定位定向仪的设计及实现（〈1mil,2σ）方法,系统利用了实际应用中的有利约束条件,对基于LAMBDA方法的载波相位整周模糊度解算算法进行了改进,经过系统工程设计,在实际应用中实现了单频、高精度、快速定向数据的输出。可以满足绝大多数环境下的使用需求,大大降低了系统成本。     

半参数模型统计诊断与粗差检验(英文)

This paper systematically studies the statistical diagnosis and hypothesis testing for the semiparametric linear regression model according to the theories and methods of the statistical diagnosis and hypothesis testing for parametric regression model.Several diagnostic measures and the methods for gross error testing are derived.Especially,the global and local influence analysis of the gross error on the parameter X and the nonparameter s are discussed in detail;at the same time,the paper proves that the d...     

缢蛏耐高盐性能及其与生长性状的相关性分析

缢蛏(Sinonovacula constricta)是我国重要的水产经济贝类,开展耐高盐新品种选育对平衡不同地区缢蛏良种养殖意义重大。本研究对不同家系缢蛏幼贝进行高盐胁迫,运用统计学方法和相关性分析探究了缢蛏耐高盐性能及其与生长性状的相关性。结果显示,缢蛏家系间壳长、壳高、壳宽和体质量表型值差异较大,体质量变异系数达15.53%。不同家系对高盐耐受性差异较大,家系间死亡率范围在0～100%。胁迫实验共持续9 d,各家系缢蛏首粒死亡时间在第1～9 d之间,而且死亡率较高的家系内缢蛏死亡时间离散程度较大,说明不同个体间高盐耐受性差异也较大。缢蛏开始出现大量死亡的时间主要在胁迫后第8 d,第9 d部分家系死亡率高于80%,说明缢蛏对高盐耐受存在一个阈值,超过该阈值会开始或大量死亡。皮尔逊和斯皮尔曼相关性分析显示,缢蛏存活时间和生长性状为正相关,其中存活时间与缢蛏壳长、体质量相关性均达到显著水平(P<0.05)。缢蛏存活率与体质量、生长速度均显著正相关(P<0.05)。整体而言,壳长较长和体质量较重的缢蛏个体耐高盐性能较强,在高盐环境中具有生长优势。本研究揭示了缢蛏的高盐耐受性及...     

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.     

无结构网格上二维浅水流动的数值模拟

提出在无结构网格上建立有限体积高性能格式族的统一框架,通过引入跨单元界面法向数值通量的逆风分解,将一维Osher、TVD两种通量分裂格式自然地推广至二维浅水方程组。给出了各种情况下浅水方程组有限体积法边界处理的计算公式。最后,利用该格式对穹包溢流、陆地动边界和河口潮流三个问题进行计算。结果表明,这类守恒格式具有高精度、无振荡性以及处理复杂流态过渡、自动捕俘间断和模拟陆地动边界的功能。     

A three dimensional model of muckpile formation and grade boundary movement in open pit blasting

Summary Formulation and case studies of a three dimensional kinematic model are presented. Thein situ overburden geometry can be simulated accurately and various initiation patterns of blasts can be modelled. The overburden geometry, hole patterns and explosive distribution are all explicit model inputs. Because the effect of explosive properties, rock mass condition and inter-row delay are very difficult to measure in terms of blast performance, these are represented in the model by control parameters which are left for calibration using field data. The output of the model is a three dimensional muckpile shape of any cross section and a contour map of grade distribution within the muckpile. Two case studies are presented which have shown that the model is a valuable tool for optimizing production blasting as well as for controlling grade dilution during blasting.     

高精度锥体棱镜的“自差法”检测技术

本文提出一种采用“自差法”检测高精度锥体棱镜的新方法，阐述检测原理与装置，建立检测角度和面形误差的定量判据，并给出一个实例说明其应用。实践表明，“自差法”检测技术对于产品质量的控制，具有快速准确和简便实用等特点。     

Tunnel blasting techniques in difficult ground conditions

Summary The quality of tunnelling can be improved by proper blast design which takes into account the rock mass conditions. The effects of different rock mass properties on tunnel blast performance need to be assessed. The strength of the formation and joint orientation critically affected fragmentation and overbreak in a model study of blasting. Similar effects were noted in situ when the performance of a blast pattern in different rock mass conditions in the Tandsi inclines (Bihar, India) were analysed. Accordingly, the on-going blast pattern was modified for the poor ground conditions prevailing in the rest of the inclines. Improved fragmentation and smooth profile were obtained as a result; the rate of drivage improved considerably and the cost of excavation was reduced. Based on the observations in the model studies and the investigations at Tandsi, some guidelines for optimum blast design in difficult ground conditions are suggested.