基于LabVIEW的预应力孔道压浆质量检测仪的软件设计

本文提出了一种预应力孔道压浆质量检测仪的硬件方案,在此基础上介绍了基于LabVIEW的仪器软件设计,重点讨论了软件实现的关键技术,实现了参数设置,多通道超声信号采集,文件管理等功能.软件界面友好,操作简单,适应仪器的野外工作,且升级维护方便.     

Seismic frame design via inverse mode design of frame-ground systems

A two-step stiffness design procedure is developed for a moment-resisting planar frame supported by a prescribed two-dimensional finite-element ground-pile system. In the first step, a hybrid inverse eigenmode problem is formulated and its solution is derived in an analytical form. A difficulty resulting from the existence of multiple interface nodes is overcome by incorporating a deformation constraint into a set of linear equations for finding the lowest-mode displacements at the interface nodes and in the ground. In the second step, the fundamental natural frequency of the combined system and the lowest mode-strain ratios in the frame specified in the first step are regarded as the parameters for adjusting the mean peak seismic member-end strains to their specified values. If the fundamental natural frequency of the frame with a fixed-base happens to be close to that of the ground, a difficulty arises in the two-step stiffness design procedure because of an irregular response amplification and of the non-predominance of the lowest-mode components. A new practical design procedure of rapid convergence is proposed such that an initial design is found for a stiff ground and that a sequence of stiffness designs is generated with respect to a ground stiffness parameter without any differential coefficient of series expansion. The accuracy of the model utilized in this paper and the validity of the present stiffness design procedure are verified through time-history response analysis.     

关于全国地震重点监视防御区制度实施现状、成效之调查、设计的说明

为评估全国地震重点监视防御区制度的实施现状、成效,课题组对相关问题进行了定性和定量研究,定量研究以系列问卷调查为主,包括政府、社区和公众问卷等。本文重点说明了系列问卷调查的设计、抽样以及回收情况,并对问卷调查发现的问题做了简单介绍。     

Seismic performance and global ductility of RC frames rehabilitated with retrofitted joints by CFRP laminates

This paper presents a new FRP retrofi tting scheme to strengthen local beam-column joints in reinforced concrete(RC) frames.The new retrofi tting scheme was proposed following a preliminary study of four different existing retrofi tting schemes.A numerical simulation was conducted to evaluate the effectiveness of FRP-strengthened reinforced concrete frames by bridging behavior of local joints to the whole structure.Local confi nement effects due to varying retrofi tting schemes in the joints were simulated in the frame model.The seismic behavior factor was used to evaluate the seismic performance of the strengthened RC frames.The results demonstrated that the new proposed retrofi tting scheme was robust and promising,and fi nite element analysis appropriately captured the strength and global ductility of the frame due to upgrading of the local joints.     

Predictive optimal control for seismic analysis of non-linear and hysteretic structures

In this paper, an effective active predictive control algorithm is developed for the vibration control of non-linear hysteretic structural systems subjected to earthquake excitation. The non-linear characteristics of the structural behaviour and the effects of time delay in both the measurements and control action are included throughout the entire analysis (design and validation). This is very important since, in current design practice, structures are assumed to behave non-linearly, and time delays induced by sensors and actuator devices are not avoidable. The proposed algorithm focuses on the instantaneous optimal control approach for the development of a control methodology where the non-linearities are brought into the analysis through a non-linear state vector and a non-linear open-loop term. An autoregressive (AR) model is used to predict the earthquake excitation to be considered in the prediction of the structural response. A performance index that is quadratic in the control force and in the predicted non-linear states, with two additional energy related terms, and that is subjected to a non-linear constraint equation, is minimized at every time step. The effectiveness of the proposed closed-open loop non-linear instantaneous optimal prediction control (CONIOPC) strategy is presented by the results of numerical simulations. Since non-linearity and time-delay effects are incorporated in the mathematical model throughout the derivation of the control methodology, good performance and stability of the controlled structural system are guaranteed. Copyright © 1999 John Wiley & Sons, Ltd.     

Optimal yield level of bilinear seismic isolation devices

The yield level of an insulator is one of the important parameters which are related to responses and absorbing energy under seismic input energy in isolated structures. The purpose of this paper is to determine the optimal ratios of yield force of the isolator (Q_y) to the total weight of the structures (W). To obtain the optimal ratio, 1044 two-degree-of-freedom isolated bridge models, which have bilinear isolators, were selected. These 2-DOF isolated bridge models with superstructure isolation can consider pier flexibility and various parameters of the isolator. Two formulas for determining the optimal yield ratio are proposed and compared with the previous researches. RAE (the ratio of absorbed energy by the isolator to the total input energy) is related directly to structural responses, and Optimal Yield Ratio (OYR), defined as a yield ratio at maximum RAE, can be obtained from the relationship between RAE and Q_y/W. Here, we found that RAE is a reliable factor to evaluate OYR, and it is proportional to earthquake amplitudes under the same kinds of earthquake loadings. Using the proposed formulas, OYR is determined and the optimal yield force of the isolator can be obtained easily and reliably at a seismic isolation design stage. Copyright © 1999 John Wiley & Sons, Ltd.     

基于单程波偏移算子的地表相关多次波成像

在常规地震资料处理中,多次反射波被视为噪声并从地震数据中去除,以免在之后的地震资料解释中造成误解.而事实上,多次波也是地震信号,是照明波场的一部分,能够对地下构造成像的精度做出贡献.本文分析了多次波在传统单程波叠前深度偏移中产生构造假象的机制和表现,为实现基于单程波偏移算子的多次波成像,修改了单程波叠前深度偏移的边界条件,即将输入的震源波场用包含多次波的记录来替代,输入的记录波场用预测出的表层相关多次波来替代,实现了基于单程波偏移算子的地表相关多次波成像,并从理论上给出了其成像依据.通过基于二范式最小能量差原则求取的匹配因子,将多次波成像结果与一次波成像结果进行匹配叠加,应用多次波成像来弥补一次波成像的不足.简单模型验证了基于单程波偏移算子的多次波成像方法的有效性,最后对Sigsbee2B模型进行了一次波与多次波联合成像试算,盐边界高陡构造成像质量得到了明显改善.     

云南典型民居建筑的抗震性能分析及其新问题探讨

基于多年实地调研考察和近20年的文献资料,对云南纳西族和汉族地区农村典型民居的抗震性能进行了研究。结合传统工艺中的抗震构造措施,分析了这种典型民居建筑形式的震害特征及原因,探讨了云南典型民居建筑在社会变迁中出现的抗震新问题和实施抗震加固工程中的问题,提出了提升区域整体抗震防灾能力的思考。     

地震预警系统中进一步提高三台震中定位精度的方法研究

针对基于3个台站Pg震相进行震中定位时有时存在误差较大、不稳定等现象,通过分析区域速度模型差异、台站的几何分布对震中定位精度的影响,结合山东虚拟测震台网,给出了接近实际的直达Pg波视速度结构,提出了三台震中定位的综合解决方案。对2009~2013年山东虚拟测震台网内1 555次地震的震中定位结果表明,应用三台定位方法得到的震中定位误差平均为8.7 km(与台网定位结果相比),提高了震中定位的精度,减少了震中不能确定的概率。     

准东石油基地幼儿园抗震鉴定与加固

结合准东石油基地幼儿园的抗震鉴定与加固实例,在对原结构抗震措施鉴定和分析验算的基础上,介绍了房屋结构薄弱部位的加固做法。对类似项目的结构加固有一定的参考价值。