Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

桥梁隔震体系振动台试验研究(IV)——隔震桥梁的设计方法探讨

在前文模型试验的基础上 ,本文总结归纳了隔震桥梁的设计方法与设计流程 ,着重论述探讨了隔震桥梁的概念设计与细部构造设计应注意的问题     

地震静校正全局最优化问题的求解

针对地震静校正存在的非线性和多参数性等问题，本文提出了一种全局优化的剩余静校正方法.在模型更新规则上，把模拟退火方法和均匀优化设计方法结合在一起，使模型的更新更为合理，从而加快了搜寻全局最优解的速度.同时提出了模型的不同分量的温度参数和退火过程的选取方式，把温度参数的选取与地震剖面的能量联系起来，使温度参数的选取具有自适应的特点.该方法克服了常规模拟退火方法所具有的寻优空间不均匀以及退火参数需通过多次试验选取的缺陷.通过实际地震资料的计算证明，本文提出的方法对地震静校正问题合理而有效.     

Recent developments in seismically isolated buildings in Japan

The Building Standard Law of Japan and related Enforcement Order and Notifications have been substantially revised since the year 2000 to introduce a performance-based regulatory and deregulation system for building control systems. Up to then, time-history analyses were mandatory for isolated buildings and had to be specially approved by the Minster of the Ministry of Construction (MOC). Simplified design procedures based on the equivalent linear method for seismically isolated buildings have been issued as “Notification 2009 — Structural calculation procedure for buildings with seismic isolation” from MOC, and are now integrated into the Ministry of Land, Infrastructure, and Transportation (MLIT). Along with Notification 2009, “Notification 1446 of year 2000 — Standard for specifications and test methods for seismic isolation devices” was also issued. Buildings with heights equal to or less than 60m and that are designed according to these Notifications, including base isolated buildings, only need approval from local building officials, and no longer require the special approval of the Minister of MLIT. This paper summarizes: 1) some statistics related to buildings with seismic isolation completed up to the end of 2001; 2) simplified design procedures required by Notification 2009 of year 2000; and 3) performance of seismic isolation devices required by Notification 1446 of year 2000.     

Practising geographical knowledge: fields, bodies and dissemination

In this article we make a case for a renewed emphasis upon some of the generic, albeit often tacit, spaces of practice that we share across our sub–disciplinary boundaries. In this we seek to emphasize the ways in which everyday actions make up the grander facades of institutional agendas, empirical projects and disciplinary schools of thought. To achieve this we trace the performance of disciplinary contours and identities across three important sites: the field, the body and the act of dissemination. There are, we will argue, significant commonalities that bind us as disciplinary practitioners in terms of how we perform within and across these sites, and indeed, how we join them up through our practices.     

辽宁省抚顺市区地质灾害监测系统设计方案

抚顺市地质灾害监测系统，由5方面工作内容组成：(1)建立统一可靠的城市高程起算基准；(2)扩展现有的沉降监测网，使分散的监测点联合形成全面、统一的监测网；(3)对浑河断裂带主断层实施监测；(4)对西露天采坑北坡滑坡重点区和采煤沉陷重点区实施水平位移监测；(5)利用计算机技术和地理信息系统(GIS)技术，建立抚顺市地质灾害信患系统。该系统是城市地质灾害防治的基础工程。系统应用了先进的监测手段及数据处理技术。文章介绍了系统的设计方案。     

WZY-1型钻参仪的研究与应用

分析了目前钻参仪未能普遍推广应用的原因。介绍了WZY－1型钻参仪的总体构成、测试参数、性能特点及其分别与钻机和水泵的一体化设计。     

机械卡盘设计中的计算误差分析与应用

通过对普通机构二维力因素影响的分析，利用修正公式计算求值，以修正单因素影响最大值计算所产生的误差。利用这一计算方法，对CD—3型钻机卡盘进行了计算，得到了正确的设计结果，说明用修正公式对多因素影响采用单因素影响最大值计算进行修正是可行的。     

现代抗震设计理论的发展过程

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。     

结构设计地震作用效应影响因素及规律分析

基于现行《建筑抗震设计规范》（GB50011－2001），本文分析了现行抗震设计中影响结构设计地震作用效应的主要因素，以规则平面框架对例对新旧规范影响结构设计地震作用效应的因素进行了对比，给出了其间的重要变化和基本规律。