通化集安群石榴子石和黑云母微区化学成分特征及其对变质作用p-T-t轨迹的指示意义

集安群片麻岩中石榴子石和黑云母接触带两侧边缘广泛发育Fe－Mg交换反应所形成的扩散环带,但晶体内部各自保持变质峰期的成分,中温带石榴子石可保留生长环带。经微区化学成分详细研究后,正确运用Grt－Bt温度计获得进变质阶段,变质高峰期和修期后Fe－Mg交换反应停止时的温度条件。按石榴子石和斜长石的微区钙含量变化确定了峰期和退变质阶段压力。据此建立起逆时针形式的变质作用p－T－t轨迹,反映该区早元古代陆壳内裂陷带的闭合过程。     

四川石棉草科穹状岩浆核杂岩构造特征

位于扬子陆块西缘的石棉草科穹状变形变质体,据近年来的研究表明,该穹隆体经历了三次变形变质时期：早期为收缩滑脱变形的区域动力变质、中期热隆伸展动热变质和后期岩浆热接触变质。对主期变质划分出黑云母带、石榴石带、红柱石－十字石带和矽线石带,确定为低压相系,利用变质反应、矿物地质温压计及相关的同位素年龄资料,建立了草科穹状变形变质体演化的ｐ－Ｔ－ｔ－Ｄ轨迹。轨迹图呈顺时针形式,具碰撞造山带环境的特点,变形变质过程受变质体前缘西油房韧性剪切带逆冲－推覆作用和后缘碰撞晚期岩浆大规模上侵的双重制约,为深源岩浆热动力变质成因,属穹状岩浆核杂岩构造。     

胶东早元古代荆山群变质作用演化样式及其构造环境探讨

胶东地区发育大面积的早无古代变质地层──荆山群。该套岩系经历了三期五个阶段的变质作用,峰期温压条件为T＝700～750℃,p＝0．50～0．60GPa,达角闪麻拉岩相。变质作用pTt轨迹为逆时针形式,反映早元古代陆缘壳内裂陷带的闭合过程。     

The Narryer Gneiss Complex of the Yilgarn Block, Western Australia: a segment of Archaean lower crust uplifted during Proterozoic orogeny

The Narryer Gneiss Complex of the Yilgarn Block is a key segment of the Western Australian Precambrian Shield. It is a regional granulite facies terrain comprised of predominantly quartzo-feldspathic gneisses derived from granitic intrusions c. 3.6–3.4 Ga old. Granulite facies metamorphism occurred c. 3.3 Ga ago, and conditions of 750–850°C and 7–10 kbar are estimated for the Mukalo Creek Area (MCA) near Errabiddy in the north. The P–T path of the MCA has been derived from metamorphic assemblages in younger rocks that intruded the gneisses during at least three subsequent events, and this path is supported by reaction coronas in the older gneisses. There is no evidence for uplift immediately following peak metamorphism of the MCA, and a period of isobaric cooling is inferred from the pressures recorded in younger rocks. Pressures and temperatures estimated from metadolerites, which intruded the older gneisses during ‘granite–greenstone’tectonism at about 2.6 Ga and during early Proterozoic thrusting show that the Errabiddy area remained in the lower crust, although it was probably reheated during the younger events. Isothermal uplift to upper crustal levels occurred at c. 1.6 Ga ago, and was followed by further deformation and patchy retrogression of high-grade assemblages. The effects of younger deformation, cooling and reheating can be discerned in the older gneisses, but as there has been no pervasive deformation or rehydration, the minerals and microstructures formed during early Archaean granulite facies metamorphism for the most part are retained. The MCA remained in the lower crust for about 1700 Ma following peak metamorphism and some event unrelated to the original metamorphism was required to exhume it. Uplift occurred during development of the Capricorn Orogen, when some 30–35 km were added to the crust beneath the Errabiddy area. The recognition of early Proterozoic thrusting, plus crustal thickening, suggests that the Capricorn Orogen is a belt of regional compression which resulted from convergence of the Yilgarn and Pilbara Cratons.     

Evaluating the stress intensity factors of anisotropic bimaterials using boundary element method

This paper presents a boundary element method (BEM) procedure for a linear elastic fracture mechanics analysis in two‐dimensional anisotropic bimaterials. In this formulation, a displacement integral equation is only collocated on the uncracked boundary, and a traction integral equation is only collocated on one side of the crack surface. A fundamental solution (Green's function) for anisotropic bimaterials is also derived and implemented into the boundary integral formulation so that except for the interfacial crack part, the discretization along the interface can be avoided. A special crack‐tip element is introduced to capture the exact crack‐tip behavior. A computer program using FORTRAN has been developed to effectively calculate the stress intensity factors of an anisotropic bimaterial. This BEM program has been verified to have a good accuracy with previous studies. In addition, a central cracked bimaterial Brazilian specimen constituting cement and gypsum is prepared to conduct the Brazilian test under diametral loading. The result shows that the numerical analysis can predict relatively well the direction of crack initiation and the path of crack propagation. Copyright © 2007 John Wiley & Sons, Ltd.     

Streamflow estimation using optimal regional dependency function

The determination of spatial dependency of regionalized variable (ReV) is important in engineering studies. Regional dependency function that leads to calculation of weighting coefficients is required in order to make regional or point‐wise estimations. After obtaining this dependency function, it is possible to complete missing records in the time series and locate new measurement station. Also determination of regional dependency function is also useful to understand the regional variation of ReV. Point Cumulative Semi‐Variogram (PCSV) is another methodology to understand the regional dependency of ReV related to the magnitude and the location. However, this methodology is not useful to determine the weighting coefficient, which is required to make regional and point‐wise estimations. However, in Point Semi‐Variogram (PSV) proposed here, weighting coefficient depends on both magnitude and location. Although the regional dependency function has a fluctuating structure in PSV approach, this function gradually increases with distance in PCSV. The study area is selected in Mississippi river basin with 38 streamflow stations used for PCSV application before. It is aimed to compare two different geostatistical models for the same data set. PSV method has an ability to determine the value of variable along with optimum number of neighbour stations and influence radius. PSV and slope PSV approaches are compared with the PCSV. It was shown that slope slope point semi‐variogram (SPSV) approaches had relative error below 5%, and PSV and PCSV methods revealed relative errors below 10%. Copyright © 2009 John Wiley & Sons, Ltd.     

利用MODIS卫星产品分析西南地区云水特征

采用NASA Goddard Earth Science DAAC发布的2001—2010年MODIS水云云水含量和水云粒子有效半径资料, 选取西南地区（四川、重庆、云南、贵州）,分析了水云云水含量和水云粒子有效半径的多年平均空间分布特征,对年和季节平均水云云水含量和粒子有效半径进行了线性趋势分析,并进行了显著性检验。结果表明：西南地区年和季节多年平均云水含量在海拔高的地方偏少,在海拔低的地方偏多;年和季节多年平均粒子有效半径的空间分布特征与云水含量相反。云水含量具有季节差异性,秋季和夏季是云水含量最丰富的季节,春季和冬季较少;粒子有效半径的季节差异较小。10年中云水含量呈减少趋势,春季和冬季云水含量减少趋势明显;而粒子有效半径无显著变化趋势。     

基于HYSPLIT4的一次四川盆地夏季暴雨水汽路径和源地分析

利用四川省156站气象资料、全球同化系统(GDAS)资料,引入拉格朗日混合单粒子轨道模型(HYSPLIT4),定量分析了2013年7月7—11日四川盆地西部暴雨的水汽输送情况。结果表明：此次暴雨过程的水汽主要来自950和850 hPa,并且两者的水汽路径和来源有着显著差别。后向追踪1天,950和850 hPa的水汽来源大值区都出现在四川盆地区;追踪3天,950 hPa的水汽来源大值区仍然在四川盆地附近,但是850 hPa上则追踪到孟加拉湾东部;追踪到9天时,950 hPa的水汽主要来源出现在阿拉伯海到我国南海地区,850 hPa上则追踪到索马里半岛东部。总体上950 hPa的水汽输送路径有五条,其中两条是北方路径,另外三条为南方路径。850 hPa的水汽输送路径有两条,一条是北方路径,另一条是南方路径。定量分析指出,950 hPa的水汽源地主要有四个,其中阿拉伯海—孟加拉湾地区的水汽输送贡献率最大（44.1%）,中南半岛—南海地区的水汽贡献率次之（33.1%）,巴尔喀什湖地区（15.7%）和贝加尔湖地区（7.1%）的水汽贡献率相对较弱。850 hPa上的水汽源地也有四个,其中从阿拉伯海地区,沿南亚夏季风爆发路径而来的暖湿空气最重要（89.4%）,其次从西北部巴尔喀什湖—贝加尔湖地区而来的干冷空气相对较弱（6.3%）,而来自孟加拉湾（3%）和局地（1.3%）的水汽则非常少。     

卫星激光测距的电控系统设计与实现

给出的卫星激光测距的二轴系统实现了通过软件控制望远镜coude光路调整、接收系统SPAD和APD的自动切换、视场光阑大小的自动调节、以及发射光束指向的精确控制。该系统是基于MPC07运动控制卡,通过人机交互界面进行实时控制,旨在实现不同功能的调节,提高卫星激光测距的自动化程度。详细介绍了该系统的硬件组成、技术指标及软件工作方式。     

High-pressure granulite from Western Kunlun,northwestern China: Its metamorphic evolution,zircon SHRIMP U-Pb ages and tectonic implication

High-pressure mafic granulites occurring as lenticular bodies within garnet-amphibolites in Kangxiwar Fault have been first reported in this paper. The P-T conditions of two metamorphic stages were ob-tained using calibrated geothermal barometers and ThermoCalc Program. The peak metamorphic con-dition of these high-pressure granulites is about 760―820℃,1.0―1.2 GPa and the retrograde meta-morphic condition is about 620―720℃,0.7―0.8 GPa. The petrological studies show that they have a near-isobaric cooling P-T...