陆态网测站高精度解算分区方案

中国大陆构造环境监测网络由260个连续全球定位系统观测站点和2 000个不定期全球定位系统观测站点构成,一般采用GAMIT或Bernese高精度数据处理软件进行处理。由于GAMIT及Bernese软件对测站数处理能力的限制,必须对陆态网连续运行基准站进行分区解算。针对这一问题,为研究不同分区方案对陆态网解算精度的影响,该文基于全国55个陆态网络连续运行基准站数据,采用整网解算方案以及间距分区法和区域子网划分法分别进行解算,并以整网解算结果作为标准值,对比两种分区方案与整网解算方案的基线长度差及坐标差。结果表明,间距分区方案解算精度比区域子网划分方案精度高,可实现对陆态网分区的高精度解算。最后利用间距分区法对全国240个陆态网络连续运行基准站进行分区解算,得到了较高精度的解算结果。     

冲绳海槽中段表层沉积物物质来源的定量分离:Sr-Nd同位素方法

利用1994年85－904航次获取的冲绳海槽中段表层沉积物样品，测定其硅酸盐相的^87Sr/^86Cr和^143Nd/^144Nd比值，以定量研究冲绳海槽中段表层沉积物硅酸盐物质的来源，结果表明，冲绳海槽中段陆坡区表层沉积物硅酸盐相的^87Sr/^86Sr/^143Nd/^144Nd与东海陆架沉物硅酸盐相的^87Sr/^86Sr和^143Nd/^143Nd相当，槽底和东坡沉积物硅酸盐相的^87Sr/^86Cr和^143Nd/^144Nd值介于中国大陆硅酸盐物质和海槽水山碎屑的^87Sr/^86Sr,^143Nd/^144Nd比值之间，并大致具有两端员混合特征，利用以Sr同位素为参数的二端员混合方程进行物源定量分析的结果表明，冲绳海槽中段的西坡和槽底表层沉积物硅酸盐相以陆源物质为主，最大值为91．07％，由西向东，陆源物逐渐减少，在海槽东坡含量最小，最小值为9．93％，火山源物质在东坡含量最高，量大值为64．92％，由东向西，由北向东，火山源物质逐渐减少为零。     

Numerical simulation of particle plugging in hydraulic fracture by element partition method

Hydraulic fracturing (HF) treatment often involves particle migration and is applied for propping or plugging fractures. Particle migration behaviors, e.g., bridging, packing, and plugging, significantly affect the HF process. Hence, it is crucial to effectively simulate particle migration. In this study, a new numerical approach is developed based on a coupled element partition method (EPM). The EPM is used to model natural and hydraulic fractures, in which a fracture is allowed to propagate across an element, thereby avoiding remeshing in fracture simulations. To characterize the water flow process in a fracture, a fully hydromechanical coupled equation is adopted in the EPM. To model particle transportation in fractures with water flow, each particle is treated as a discrete element. The particles move in the fracture as a result of being dragged by fluid. Their movement, contact, and packing behaviors are simulated using the discrete element method. To reflect the plugging effect, an equivalent aperture approach is proposed. Using this method, the particle migration and its effect on water flow are well simulated. The simulation results show that this method can effectively reproduce particle bridging, plugging, and unblocking in a hydraulic fracture. Furthermore, it is demonstrated that particle plugging significantly affects water flow in a fracture and hence the propagation of hydraulic fracture. This method provides a simple and feasible approach for the simulation of particle migration in a hydraulic fracture.     

砂岩含水介质中铀的吸附和迁移行为研究

地浸铀矿山退役后,含水层中残留的含铀浸出液随着地下水的运动向下游迁移扩散,存在对周边地下水污染的风险。本文设计了若干组批实验和柱实验,研究铀在北方某地浸铀矿山砂岩含水介质中的吸附和迁移行为。实验结果表明,砂岩对铀的吸附在12 h以内达到平衡,铀初始浓度越高,砂岩的铀吸附容量越大;砂岩对铀的吸附为吸热反应,温度升高有利于吸附反应的进行。溶液pH值和共存 {\mathrm{HCO}}_3^{-}浓度会对铀的吸附作用产生强烈的影响:pH值在7左右时,铀的吸附量最高; {\mathrm{HCO}}_3^{-}浓度越高,铀的吸附量越低。这些影响是通过改变溶液中铀的络合形态和砂岩矿物表面的电荷性质实现的。柱实验表明,pH值、铀浓度、流速和 {\mathrm{HCO}}_3^{-}浓度是影响铀在饱和砂岩含水介质中迁移的重要因素。pH值≤7时,pH值越高,砂岩柱越不易被铀穿透;而铀浓度、流速、 {\mathrm{HCO}}_3^{-}浓度越高,砂岩柱越易被铀穿透。两点非平衡模型可以很好地拟合不同条件下铀在砂岩柱中的迁移过程。批实验获得的分配系数是柱实验的1.16.6倍。通过对比实验条件、含水层特性和地下水化学特征,确定分配系数为48.1 mL/g时,较适合描述研究区内砂岩含水层中的铀迁移。上述认识为地浸铀矿山地下水铀的反应运移过程和天然自净化机理提供了理论依据。     

花岗岩体系中岩浆阶段金属组分的浓度(英文)

在岩浆阶段 ,富集金属元素最有效的机制是流体熔体的分离。受到硅酸盐熔体中盐的溶解度的限制 ,这种分离实为一个天然结晶过程的产物 ,所以必然发生在岩浆结晶的最后阶段。含氟的花岗岩体系中的矿物相的关系是已知的 ,并已确定了一个宽的液相不混溶区 ,其中也包括霞石标准分子的成分。该体系的不同部分 ,由多种元素在共存的硅酸盐和氟化铝两种熔体间的分配就可以得知。在这些实验中首次确定出元素分配与体系成分间的关系。这些数据也可解释一些经验数据所熟知的地球化学标志的变化。     

矿物—熔体间元素分配系数资料及主要变化规律

本文提供了不同成分的8大类主岩(偏铝质(超)基性岩、过碱性(超)基性岩、偏铝质中性岩、过碱性中性岩、偏铝质酸性岩、过碱性酸性岩、过铝质酸性岩、超酸性岩)中28个矿物(橄榄石、单斜辉石、斜方辉石、角闪石、黑云母、金云母、斜长石、钾长石、石英、磁铁矿、钛铁矿、石榴石、锆石、磷灰石、绿帘石、黄玉、榍石、堇青石、蓝方石、石榴石、霞石、白磷钙矿、镁铁钛矿、板钛矿、黄长石、钙钛矿、尖晶石、金红石)的69个化学元素(Li、Rb、Cs、K、Na、Ca、Sr、Ba、Mn、Fe、Mg、Cu、Pb、Zn、Co、Ni、Be、La、Ce、Nd、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu、Y、Sc、Cr、In、Ga、Al、B、Cd、Sb、Bi、U、Th、Zr、Hf、Si、Ti、Ge、Sn、Mo、Nb、Ta、W、V、P、F、Cl、S、N、O、C、As、Pu、Re、Os、He、Ne、Ar、Xe、Kr)和1个化学一价原子团OH的分配系数。综合分析对比表明,矿物、熔体的成分和结构是分配系数的最重要的控制因素。对前人未讨论过的矿物结构和熔体铝过饱和度这两个因素应引起重视。最后,本文分析了矿物-熔体间元素分配系数的研究现状、存在问题,指出了这一领域今后的研究方向。     

TDR detection of nonaqueous phase liquids in sandy soils using the eigendecomposition method

In this study, the presence of nonaqueous phase liquids (NAPL) in sandy soils are detected using a TDR probe system and the eigendecomposition method of analysis. As a demonstration, five NAPLs with different physicochemical properties (acetone, benzene, heptane, trichloroethylene, and xylene; Table 1) were used. Samples were prepared in such a way that the soil pore fluid has different contents of deionized water and NAPLs. For each experiment, a pulse signal with known characteristics was used and reflected signals were captured by an oscilloscope and analyzed using the eigendecomposition method. Autoregressive modeling and singular value decomposition were used to calculate the eigenvalues. The most significant eigenvalues were identified based on their power spectrum. The relative eigenvalue of the first mode (Eow), which is a measure of the power carried by the signal, was calculated and correlated to NAPL type and content, and octanol water partition coefficient (log Kow). The results indicated that for the same NAPL content, as log Kow increases, Eow decreases due to increase of hydrophobicity. For the same log Kow, as the organic content in soil pore fluid increases, Eow increases due to decrease of dielectric properties of the pore fluids.     

Drag Partition for Regularly-Arrayed Rough Surfaces

Vegetation and other roughness elements distributed across a surface can providesignificant protection against wind erosion by extracting momentum from the flowand thereby reducing the shear stress acting at the surface. A theoretical model haspreviously been presented to specify the partition of drag forces for rough surfacesand to predict required vegetation density to suppress wind erosion. However, themodel parameters have not yet been constrained and the predictive capacity of themodel has remained uncertain. A wind-tunnel study was conducted to measure thedrag partition for a range of roughness densities and to parameterise the model inorder to improve its range of potential applicability. The drag forces acting on bothan array of roughness elements and the intervening surface were measured independentlyand simultaneously using new drag balance instrumentation. A detailed measure of thespatial heterogeneity of surface shear stresses was also made using Irwin sensors. Thedata agreed well with previous results and confirmed the general form of the model.Analysis of the drag partition confirmed the parameter definition = C_R/C_S(where C_R and C_S are roughness element and surface drag coefficients,respectively) and a constant proportional difference between the mean and maximumsurface shear stress was found. The results of this experiment suggest that the definitionfor m, the surface shear stress inhomogeneity parameter, should be revised, although thetheoretical and physical reasons for including this parameter in the model appear to bevalid. Best-fit values for m ranged from 0.53 to 0.58.     

基于分拆数的角色访问控制模型的原理与实现

介绍了基于分拆数的权限管理策略的原理及其在角色访问控制模型中的应用，实现了一个结构简单、伸缩性好、功能强大的权限管理系统。提出了自然数按集合分拆的新概念，同时给出了一个自然数按某个有限集狭义分拆唯一的充分条件。     

有序样品聚类的最优分割应用程序开发

在地层划分、蚀变、矿化、圈定矿体的研究中，有序样品聚类的最优分割法——数学处理方法是一个十分有效的方法，而该方法的数据处理是一个复杂而繁琐的过程。为了有志于地质研究的爱好者，根据最优分割的数学处理原理，将最优分割法编制成易于为非计算机专业人员所利用的处理软件，并免费共享。该程序使用方便，操作简单，只要按文中说明加以编辑，即可投入使用。