An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.     

Sediment movement under unidirectional flows: an assessment of empirical threshold curves

A selection of threshold data sets from previous investigations is used to re-examine, selectively, some of the empirical curves that are most commonly used for the prediction of sediment threshold. Simple analytical formulae are derived describing single line curves for mean threshold values and envelopes for the initial movement of discrete particles and the commencement of mass sediment transport phases of the critical condition.The complexity of factors governing the prevailing conditions at threshold, together with the randomness of events, limits deterministic solutions; however, the curves provide an approach that can be used readily in practical applications. In contrast, the envelope presentation is more of a stochastic approach to the definition of threshold. It recognises that there is no definitive threshold condition under which a particular particle size can be displaced, but rather that a range of threshold values exist.The empirical threshold relationships were derived on the basis of a relatively large amount of data. However, the sources utilised have interpreted the ‘critical condition’ in various ways, implying that the formulae must be treated with caution in applications.     

PLATEAU TYPE E(%)-pH CURVES OF INTERFACIAL EXCHANGE BETWEEN LIQUID AND SOLID IN SEAWATER

A study on the curves of the exchange ratio E(%)-pH on the liquid-solid interface of the systems Zn(II) with clay minerals (Kaolinite , illite and montmorillonite), Zn(II) with hydrous ferric oxides (amorphous ferric oxide, goethite and hematite). Zn(II) with hydrous manganese oxide (y-MnOOH, manganite and 5-MnO2) etc . in seawater resulted in the discovery of new plateau type exchange ratio ?%)-pH curves not yet reported in literature. The two factors that decide the growth , decline and the change of the " plateau type " curve are : (1) the inherent characteristics of systems , which can be explained by the exchange constants i(i=1 ,2 , 3 . etc .) of interfacial stepwise ion / coordination particle exchange between liquid and solid ; and (2)The theory of interfacial stepwise ion/coordination(the amount of solid exchange reagent)particle exchange in seawater was applied to explain the experimental results of the above study and a general formula was derived for the plateau type exchange ratio E(%)-pH c     

基于非等间距模型的建筑物沉降预测方法研究

该文基于实测资料进行建筑物沉降预测。在灰色模型和泊松曲线模型理论的基础上,引入对非等间距数列进行变换处理的方法,从而建立了非等间距预测模型。结合建筑物沉降监测资料进行分析比较,结果表明,两种预测方法均能较好地反映建筑物的沉降趋势。     

水平井含水率上升影响因素

利用塔里木油田塔中4油田(TZ4)底水油藏相关的地质、流体数据建立数值模型。在所建模型的基础上,应用数值模拟计算的累积产油、产水和产液量回归俞启泰水驱特征曲线,以反映水平井见水特征的参数b。以参数b为研究对象,采用正交试验的方法研究不同因素对b值的影响,筛选影响水平井见水特征的主要因素,认为原油粘度、油层厚度、非均质性及水平井水平段在油藏中的位置是影响水平井含水上升趋势的主要指标。最后建立主要因素与b值的关系式,结合俞启泰曲线b值图版,提出预测水平井见水规律的公式——图版法(F-b法)。应用F-b法对塔里木水平井含水率进行预测,并与其他相关方法及实际生产数据对比,认为F-b法可作为预测塔里木油田水平井含水率、估算可采储量的一种有效方法。     

火山沉积岩及其矿床研究中伽马测井曲线解释的误区

根据酸性凝灰岩和酸性火山事件粘土岩的自然伽马测井曲线,对当前流传的"沉积岩层的放射性强度(或放射性核素的含量)随泥质含量的增加而增高"的概念和用自然伽马值及经验公式求泥质含量提出质凝。酸性凝灰岩的自然伽马曲线有高异常响应,若解释为泥岩显然是误解,故将沉积岩伽马曲线高异常一律解释为泥岩是片面的。各类火山事件粘土岩的伽马值相差悬殊,但其泥质含量几乎相等,用它们的伽马值计算泥质含量误差甚大。最后对铝土矿层的伽马曲线稍加解释,指出核测井应用的远景。     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

松辽盆地宋芳屯油田扶杨油层孔隙结构及其影响因素

通过镜下观察,宋芳屯油田扶杨油层孔隙类型较多,以粒间孔为主。细管压力曲线上看,曲线较陡,分选差,孔隙结构特征参数总体上较差,与孔隙度、渗透率有一定的关系,大的孔隙对渗透率的贡献最大。扶杨油层的孔隙结构较复杂主要由于成岩作用影响,压实作用使孔隙空间显著缩小,胶结作用和自生粘土矿物生长使孔隙进一步缩小和复杂化,后期的溶蚀作用使孔隙空间增加。     

饱和软土压缩曲线的“反常”现象

饱和软土压缩试验时,经常出现压缩曲线“反常”、压缩系数“倒大”的现象。它是土的原始结构发生破坏前后的不同压缩性的客观反映。饱和软土的结构力很微弱,唯质量好的原状土才能见到这种“反常”。应从成孔、取样、测试及资料整理等多个环节保证其工程意义。     

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.